• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.173-189
• /
• 1973

The followings are the results obtained in a series of experiments concerning of the varieties, the short-day-treatment, the fertilizer application, and the planting space of soybean, which were carried out to investigate the methods best suited for cultivating green soybean as the preceding crop of the rice. in the paddy-field in the middle parts of Korea at the practice farm attached to Agriculture College of Kon Kuk University in 1972. 1. Though the varieties of soybean was planted on the hot-bed on March 15 and then set in the main plot, none of them did flower within May 15, which is the limit time of flowering in growing soybean as the preceding crop of the rice in the paddy-field without the short-day-treatment being applied during raising seedlings. 2. The earliest-maturing variety groups such as HOKKAl#l, WASEMIDORI, YAEHUSANARI, MIT AKARAHAKUCHO, and VERDE flowered within May 15 by the short-day-treatment during raising seedlings. 3. The optimum hours of the day length was known to be 7 to 9 in the medium-maturing and late-maturing variety groups and 7 to 11 in the early-maturing and the earliest-maturing variety groups in the case of appling the short-day-treatment for 10 days from the beginning of the primary regular compound leaf development. 4 The optimum days in appling the short-day-treatment for 11 hours a day was recognized to be about 10 days regardless of the maturity of varieties. 5. Reduction of days required to flower by the short-clay-treatment, that is, light-sensitivity was remarkably higher in the medium-maturing and the late-maturing variety groups than in the earliest-maturing and the early-maturing variety groups. 6. The yield showed an increase of about 17 per cent in the case of appling the standard amount of nitrogen(4.0 kg/10 a), but it tended to reduce on the contrary in appling the increased amount of nitrogen. 7. The application of increased amount of phosphate had less significant effect on the yield increase than in the case of application of its standard amount( 4.0 kg/l0 a). 8. When the number of transplantation plant was changed from 54 to 130 per 3.3 $m^2$, the yield in 130 plant plot was about two times so higher than in 54 plant plot that the effect of close planting cultivation on the yield was proved to be remarkable. 9. Conditions possible for cultivating green soybean as the preceding crop of the rice in the paddy-field in the middle parts of Korea are turned to be as follows: (a) to plant the earliest-maturing-variety groups on the hot-bed on March 15. (b) to apply the short-day-treatment by 11 hours a day for 16 days from April 16, which is about the time when the primary regular leaf begin to develop. And it was, found to be a most remarkable in the increased yield that apply nitrogen 4.0 kg, phosphate 4.0 kg, and potassium 6.0 kg per 10 a as basic manuring totally and apply the close planting by 130 plants per $3.3{m^2}$(50 cm $\times$ 5 cm).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.274-279
• /
• 1989

The objective of the study was to determine optimum clipping time, interval and height of Suwon 1 pearl millet hybrid in Korea to increase forage yield and quality. Clipping height 20 cm above the ground surface was the best resulting in producing 11.1 tons per hectare of green chop. However, clipping height 5 cm was not good for regrowth of the ratoon crop. Just after the first cutting when the plant height reached two meters around mid-July, four weeks cutting interval was the best for higher forage yield of 11. 4 tons per hectare. Crude protein content of the clipping height 20 cm was the highest being 12.8 percent. Dry matter of the first cut contained 14 percent of crude protein being the highest, and with lower crude fiber content of 24 percent. And also four weeks cutting interval was the highest in crude protein content being 13.1 percent along with lower crude fiber content of 24.2 percent. Thus, the forage yield depended on clipping height greatly, but the quality was dependent upon clipping time, interval and frequency more than cutting height pearl millet plant. It would be desirable for higher yield and quality of Suwon 1 pearl millet hybrid to cut three or four times during the growing season at 20 cm clipping height and at four weeks clipping interval from the first cut when the canopy height is above one meter under the Korean environmental conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.484-490
• /
• 2015

Thirty-eight Pea (Pisum sativum L.) genotypes were screened to identify varieties to be suitable for sprout. Based on seed yield and sprout qualities such as whole length and sprout yield, five genotypes (PI269803, PI343278, PI343283, PI343300 and PI 343307) were primarily selected as candidates for pea sprouts. In order to determine optimal cultivation condition for pea sprouting, growth characteristics were investigated according to the change of germination temperature and days for sprouting. Whole length and hypocotyl length were observed to increase as a time dependent manner at each tested temperature (20, 23, and $25^{\circ}C$). However, whole length, hypocotyl length, and sprout yield were highly increased at $23^{\circ}C$ compared to 20 and $25^{\circ}C$. Especially, PI269803 and PI343300 showed higher sprout yield than the others. In addition, the effect of the change of germination temperature on antioxidant properties was estimated by measuring total phenolic content (TPC) and free radical scavenging activity (DPPH and ABST activity). TPC and DPPH/ABST activities of PI269803 and PI343300 were higher at $23^{\circ}C$ than at 20 and $25^{\circ}C$, while antioxidant properties of PI343278 and PI343283 were decreased in a temperature-dependent manner. The results show a high degree of correlation between TPC and antioxidant activities and suggest that the temperature change for pea sprouting could be responsible for antioxidant properties. Taken together, these results provide optimal cultivation conditions for pea sprouting and suggest that PI269803 and PI343300 with high sprout yield and antioxidant properties could be used for pea sprouts.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.349-353
• /
• 2009

We developed a new barley cultivar "Dami" (Hordeum vulgare L.) with the auricleless gene lig (al, li, aur-a). The characteristic of auricleless is a spontaneous mutant type which has known as a monogenic recessive gene. The plant with the gene has erect leaf blades because of no auricle. The cultivar was derived from a cross between 'BGS60' and 'Kangbori'. 'BGS60' has the auricleless gene (li), while 'Kangbori' showed a high biomass with winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus). Subsequent generations were handled by the bulk method in a pedigree selection program. A promising line showed both high yield and lodging resistance in the yield trials at Iksan in 2003 to 2004, and designated as Iksan414. The line was subsequently evaluated for winter hardiness, earliness, and yield in the seven locations around Korea for three years from 2005 to 2007 and was designated as "Dami" and released. It has the growth habit of III, erect plant type, green leaf and stem similar to the check cultivar 'Sunwoo' Its heading date was April 30, and maturing date May 31 in paddy field conditions, which were similar to those of 'Sunwoo' respectively. The cultivar Dami was 97 cm in culm length, had 643 spikes per $m^2$ and higher leaf dry weight, and better adaptability to dense planting, winter hardiness, and resistance to BaYMV than the check cultivar did. The average forage yield of "Dami" was about 12 ton $ha^{-1}$ in dry matter (33 ton $ha^{-1}$ in fresh matter) in paddy field. "Dami" also showed 7.5% of crude protein content, 28.5% of ADF (Acid Detergent Fiber), 50.1% of NDF (Neutral Detergent Fiber), and 66.4% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley. This cultivar would be suitable for the area where the daily minimum temperature of January is above $-8^{\circ}C$ in Korean peninsula.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.359-365
• /
• 1985

The four rice varieties, Kwanak, Nongbaek, Pungsan and Nampung-byo were cultivated to examine the growth conditions and grain yield in a Gyuam SiL paddy field irrigated with cold water around $17^{\circ}C$. Water temperatures for various distances from the inlet were measured. The results were summerized as follows. 1. Culm length, panicle exertion, diameter of the 3rd internode stem, heading date, fertilization rate, ripeness rate, no. of grains per panicle and grain yield were sensitive to water temperature. Panicle length, flag-leaf length, diameter of spike-neck and no. of panicles, however, were negligibly sensitive and there were no differences among varieties. 2. Elongations of the 2nd and 3rd internode steam were unsensitive to water temperature. 1st internode elongation and 4th internode development, however, were sensitive which was major factor in the culm length. 3. Ratios of partial dry weight to total dry weight were closely correlated with water temperature, Therefore, dry weight of grain was increased with water temperature while that of plant and root decreased. 4. Chlorophyll contents were decreased with the increment of water temperature and the highest at $20^{\circ}C$. 5. There was no grain yield at $17^{\circ}C$, Increases of grain yield to water temperature per unit were order at Pungsan > Kwanak > Nongbaek > Nampung. 6. The critical temperature in grain yield was $21^{\circ}C$. Optimum temperatures of Japonica ${\times}$ Indica types were higher than those of Japonica types.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.555-564
• /
• 2010

Aphid and mite are the major insects that harm corn. These insects are difficult to control because they are very sensitive to environmental conditions. The purpose of this experiment was to information the loss in quantity of corn and to select inbred lines with resistance after exposing corn to aphid and mite. When exposed to aphid, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 18.4, 10.9, 1.7, 5.4, 2.3, 1.5 and -0.2%, respectively. When exposed to mite, the average loss in grain yield, ear length, ear diameter, 100 kernel weight, kernel length, kernel width, and kernel thickness were 49.7, 16.5, 20.7, 18.9, 9.5, and -3.4, respectively. Mite had more significant impact on the loss than aphid. Among these factors, grain yield and ear dimater were most significantly correlated on the loss to aphid ($r=0.83^{**}$), while kernel length and thickness were most significantly correlated on the loss to mite ($r=0.83^{**}$). However, ear length was not related to loss to the two insects. The inbred lines that were often used for $F_1$ hybrid which was lower than the average loss by aphid, were KS7, B68, 61B3, 70A1, and KS5, while the inbred lines that were often used for $F_1$ hybrid which was lower than the average decrease by mite, were KS7, B68, 61B3, 66B2-4, 70A1, 72B2, and KS5. These inbred lines could be used to breed inbred lines, hybrid, and open pollination variety that confer resistant to aphid and mite.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.270-280
• /
• 1988

This experiment was conducted to evaluate the main effects and pleiotropic effects of two comparable isogenic lines for culm and spike length in hulled barley and observed various agronomic characteristics, yield and yield components under the conditions of heavy fertilizer application and high planting densities. Three isogenic lines, culm, spike and culm and spike, were planted and to obtain basic data for improving high-yielding and quality of hulled barley at Experiment Farm, Dankook Univ., Cheonan city in 1985. Differences of culm length between two comparable isogenic lines, short culmed line (SCL) and medium culmed line (MCL), in isogenic lines for culm length showed highly significant differences. And differences of spike length between two comparable isogenic lines, short spike line (SSL) and medium spike line (MSL), in isogenic lines for spike length showed highly significant differences. Differences of culm and spike length between two comparable isogenic lines, short culmed and spike line (SCSSL) and medium culmed and spike line (MCMSL), short culmed and spike line (SCSSL) and long culmed and spike line (LCLSL), in isogenic lines for culm and spike length showed highly significant differences. Characteristics affected highly by the genes of culm length in isogenic lines for culm length were heading days, the 1st and 2nd internode length, No. of grains per spike, No. of spikes/m$^2$, and one litre weight. Characteristics affected highly by the genes of spike length in isogenic lines for spike length were No. of spike nodes, heading days, maturity days, thousand grain weight and one litre weight. Characteristics affected highly by the genes of culm and spike length in isogenic lines for culm and spike length were No. of spike nodes, the 2nd, 3rd and 4th internode length, thousand grain weight and grain yield. Grain yield of SCL, MSL, MCMSL and SCSSL was more than grain yield of MCL, SSL, SCSSL and LCLSL, respectively. Maturity days of SCL, MSL, SCSSL and LSLSL were faster than maturity days of MCL, SSL, MCMSL and SCSSL, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.117-133
• /
• 2010

A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than at the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0 kN to 196 kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.7 no.5
• /
• pp.295-302
• /
• 2002

To understand the utilization property of light energy, Synechococcus sp. MA19, a poly-${\beta}$-hydroxybutyrate (PHB) producer, was cultivated at the different incident light intensities of 15.3, 50.0 and 78.2 W/$m^2$ using media with and without phosphate. From the results of metabolic flux analysis, it was found that the cell yield based on ATP synthesis was estimated as $3.5{\times}10^{-3}$ kg-biomass/mol-ATP in these cultures. Under the examined conditions, there were no significant differences in the efficiency of light energy conversion to chemical energies estimated as ATP synthesis and reducing potential (NADH + NADPH) formation whether the PHB synthesis took place or not. The energy converted from light to ATP was kept relatively high around the energy absorbed by the cells of $2.5-3.0{\times}10^{6} J\;h^{-1}\;kg^{-1}$, whereas the energy of reducing potential was hardly changed in the examined range of the energy absorbed by the cells.