• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.149-154
• /
• 1997

A storage mite, Tyrophcgus putrescentiae, is recently known to be widely distributed in Korea, being commonly found in house dust, and may, therefore, be allergenically important. The purpose of this study was to develop mass rearing techniques for supplying a large quantity of allergens. The laboratory mouse food powder gave the highest yield, showing 1,251.5-fold increase in number after 10 weeks, and the mixed powder of laboratory mouse food and yeast (1 : 1) also gave same level of the production (1.203 1-fold increase in week 10). Several different combinations of temperature and relative humidity conditions were compared, and the maximum propagation was obtained at $25^{\circ}C$ and 64% RH, showing 960-fold increase in number. When the same amount of culture media was used the size of the culture container did not significantly influence the quantitative yield of T. putrescentice mites.

• Korean Journal of Materials Research
• /
• v.10 no.6
• /
• pp.445-449
• /
• 2000

Nickel ferrite $(Ni_{0.75}Fe_{2.25}O_4$ was synthesized by co-precipitation method in order to investigate its behavior under conditions of the reactor coolant system in pressurized light water nuclear power plants. Ammonia or potassium carbonate was used as a solution pH control agent, and aqueous ammonia or potassium carbonate solution or secondary distilled water was used as a co-precipitate washing agent. The effects of the pH control agent and the co-precipitate washing agent on the production yield on the basis of the Ni/Fe molar ratio and the particle characteristics of final products were investigated by XRD, SEM, EDX and XPS. The production yield was almost congruent with that of the initial aqueous mixture in case of using potassium carbonate as a pH control agent, while in case of using ammonia, it was quite changed. The difference seemed to be due to the effects of $Ni^{2+}{\leftarrow}NH_3$complexation in the aqueous solution and of the pH of co-precipitate washing agent.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.201-211
• /
• 2015

Purpose: Designing equipment for processing, sorting, and other post-harvest operations of agricultural products requires information about their physical properties. This study was conducted to investigate some of the mechanical and physical properties of Moringa oleifera L. pods and seeds. Methods: Properties such as the length, width, thickness, bulk density, porosity, mass, static coefficient of friction, and angle of repose were determined as a function of moisture content. Statistical data and force-deformation curves obtained at each loading orientation and moisture level were analyzed for bioyield point, bioyield strength, yield force, rupture point, and rupture strength using a testrometric machine. Result: The basic dimensions (length, width, and thickness) of moringa pods and seeds were found to increase linearly from 311.15 to 371.45 mm, 22.79 to 31.22 mm, and 22.24 to 29.88 mm, respectively, in the moisture range of 12 to 49.5% d.b. The coefficient of friction for both pods and seeds increased linearly with an increase in moisture content on all the surfaces used. The highest value was recorded on mild steel, with 0.581 for pods and 0.3533 for seeds, and the lowest on glass for pods, with a value of 0.501, and of 0.2933 for seeds on galvanized steel. The bioyield and rupture forces, bioyield and rupture energies, and deformation of the pods decreased with an increase in moisture content to a minimum value, then increased with further decrease within the moisture content range, while the yield force increased to a maximum value and then decreased as the moisture content increased. Conclusion: These results will help to determine the most suitable conditions for processing, transporting, and storing moringa pods, and to provide relevant data useful in designing handling and processing equipment for the crop.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.19-24
• /
• 1984

Experiment was conducted to know the interaction of temperature and solar radiation for spikelet formation of rice in different location. Under the Korea climatic conditions both number of spikelets and percentage of ripened grains affected yield of rice. Percentage of ripened grains was the most significant limiting factor in Tongil type rice varieties and the lower number of spikelets in japonica type varieties. The number of spikelets increased as amounts of solar radiation increased during the reproductive stage, as daily air temperature decreased from 23 to 28$^{\circ}C$, or as climatic consumption index (CCI) value decreased. CCI calculated with critical temperature of 1$0^{\circ}C$ and solar radiation was more closely correlated with the number of spikelets compared to CCI calculated with sunshine hours instead of solar radiation. CCI during the 15 days before heading was more closely related with the number of spikelets compared to CCI during the 30 days before heading.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.103-111
• /
• 1993

A greenhouse experiment was conducted to determine the number of optimum. tillers within a plant for high yield and to clarify the morpho-anatomical characteristics of cultivars having different tillering abilities. Optimum tillers, i.e tillers which produced heavy panicles were found to be around five to nine tillers per plant, although wider range may be possible if more cultivars were tested or under different growth conditions. Optimum tillers emerged within a short time after transplanting as compared with the other tillers. They exhibited longer tiller duration, produced more spikelets and had better filled spikelets, more vascular bundles and were taller with larger leaf area. However, the 1, 000 grain weight and fertility varied with cultivars and showed no general trend. Of this morpho-anatomical features, the total number of spike lets per plant was considered as the potential criterion for determining the optimum tiller number.

• KSBB Journal
• /
• v.13 no.6
• /
• pp.687-692
• /
• 1998

Experimental studies were carried out on the use of supercritical fluid in enzymatic hydrolysis of cellulose. In order to effectively perform the hydrolysis the enzyme has to maintain stability and activity in the supercritical carbon dioxide solvent. In the experiment it was found that the stability of cellulase was maintained up to 160 atm for 90 min at $50^{\circ}C$. In the enzymatic hydrolysis of cellulose at supercritical conditions using carbon dioxide at 80 atm and $50^{\circ}C$ for 90 min, the results showed that glucose yield was 100%, which was 1.5 times as compared to that in atmospheric condition when the substrate (Avicel) concentration was 20 g/L. For the substrate concentration of 60 g/L, the glucose yield was increased by 1.2 times as compared to that in atmospheric condition.

• Nuclear Engineering and Technology
• /
• v.23 no.4
• /
• pp.420-425
• /
• 1991

The Rb charge exchange cell is constructed as the He- ion source of the SNU 1.5- MV Tandem Van do Graaff accelerator. The characteristic experiment is carried out in order to determine the optimum operational conditions of the cell. The $He^{+}$ ion beam with the energy of 1~10 keV, extracted from the duoplasmatron ion source, is passed through the Rb vapor to become He- ions by the two step charge exchange reaction, i.e., $He^{+}\;+\;Rb\;{\rightarrow}\;He^{\circ\ast}\;+\;Rb^{+}\;and\;He^{\circ\ast}\;+\;Rb\;{\rightarrow}\;He^{-}\;+\;Rb^{+}$. From the experimental results, it is found that the maximum fractional yield of $He^{-}$ ions is produced at He+ ion energy of 7 keV. The optimum temperatures of the oven and the canal are determined to be $370\;^{\circ}C{\;}and{\;}95^{\circ}C$ respectively. Under the optimum operational condition the maximum fractional yield of $He^{-}$ ions is $2.42\pm0.02%$ This charge exchange cell is proved to be an effective system for the production of He- ions.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.119-123
• /
• 1998

Effects of elevated CO2 and temperature on nitrogen (N) uptake , leaf N concentration, N partitioning , N use efficiency (NUE) and grain yield of pot and field grown rice (Oryza sativa. L.cv. Chukwangbyeo) under canopy-like conditions were studied over three years. Rice plants were grown in pots and in the field in temperature gradient chambers containing either ambient(350ppm) or elevated CO2 concentrations (690 or 650ppm) in conbination with either four or seven temperature regimes ranging form ambient temperature(AT) to AT plus 3$^{\circ}C$. There were three N supplies 94g or 6g m-2 to 20g or 48g m-2.Elevated CO2 increased N uptake in field-grown rice ; the magnitude of this effect was thelargest (+15%) at the highest N level. However, in pot-grown rice, N uptake was suppressed with the effect was the largest at high N levels. Leaf N concentration declined at elevated CO2 mainly due to a decrease in N partitiioning to the leaf blades. Air temperature had little effect on the N parameters mentioned previously, wherease NUE for spikelet production declined rapidly with increased temperature irrespective of CO2 concentration. The response of the biomass to elevated CO2 varied with N level, with the greatest response at 20g N m-2 (+30%) . At AT, where high temperature-induced sterility was generally not observed, elevated CO2 increased yield. However, the magnitude of this effect varied greatly (2-39%) with N level, and was mainly dependent on the magnitude of the increase in spikelet number.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.76-85
• /
• 2015

In this study, we investigated optimal reaction conditions for furfural production from lignocellulosic biomass by two-stage acid treatment. Furfural produced by this method was recovered using XAD-4 resin. Oxalic and sulfuric acid were used as catalysts for the first stage of treatment. The concentration of xylose in the hydrolysate obtained from the first stage was $18.86g/{\ell}$ with oxalic acid and $19.35g/{\ell}$ with sulfuric acid. The concentration of oligosaccharide was relatively high when sulfuric acid was used. Maximum yield of furfural, that is, 55.10% ($6.71g/{\ell}$), was obtained when oxalic acid was used for the first stage and $0.1m{\ell}$ of sulfuric acid was used for the second stage of treatment for 90 min. Furfural production yield increased with increasing the reaction time. Most of the furfural produced by this two-stage treatment method was recovered using XAD-4 resin.