• The Korean Journal of Mycology
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1985

This experiment was undertaken to investigate proper conditions for protoplast isolation from strains of Agaricus bisporus, Flammulina velutipes, Lentinus edodes, Pleurotus florida, Pleurotus ostreatus, Pleurotus sajor-caju and Volvariella volvacea. Combination of ${\beta}-D-glucanase$, novozym 234 and snail enzyme with 0.6M $MgSO_4$ in 0.05M Na-maleate buffer, pH 5.8 was the most effective for isolation of protoplasts. High yields of protoplasts were obtained from $4{\sim}5$ days old mycelia of P. florida and P. ostreatus on mushroom complete agar medium. Protoplasts were also obtained in good yield from other fungi but A. bisporus and V. volvacea. In the latter two cases protoplast release was observed; however, the yield was much lower than those of the other fungi.

• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.524-529
• /
• 2017

The effect of strain aging on the tensile properties of API X70 linepipe steel was investigated in this study. The API X70 linepipe steel was fabricated by controlled rolling and accelerated cooling processes, and the microstructure was analyzed using optical and scanning electron microscopes and electron backscatter diffraction. Strain aging tests consisting of 1 % pre-strain and thermal aging at $200^{\circ}C$ and $250^{\circ}C$ were conducted to simulate U-forming, O-forming, Expansion(UOE) pipe forming and anti-corrosion coating processes. The API X70 linepipe steel was composed of polygonal ferrite, acicular ferrite, granular bainite, and bainitic ferrite whose volume fraction was dependent on the chemical composition and process conditions. As the thermal aging temperature increased, the steel specimens showed more clearly discontinuous type yielding behavior in the tensile stress-strain curve due to the formation of a Cottrell atmosphere. After pre-strain and thermal aging, the yield and tensile strengths increased and the yield-to-tensile strength ratio decreased because yielding and aging behaviors significantly affected work hardening. On the other hand, uniform and total elongations decreased after pre-strain and thermal aging since dislocation gliding was restricted by increased dislocation density after a 1 % pre-strain.

• Korean Journal of Microbiology
• /
• v.16 no.4
• /
• pp.170-179
• /
• 1978

By the successive enrichment culture, more than 250 methanol-utilizing bacteria were isolated from various samples such as soil, waste water and sewage. Two strains of which were selected and tentatively identified as Acinetobacter sp. and Pseudomonas sp. experiments were carried out to determine the growth conditions for the higher biomass yield and to demonstrate the difference to protein composition dependent upon carbon sources of these two species. the results were as follows ; 1. the optimum pH was determined as 8 in the both species. The optimum temperature in Acinetobacter sp. was $25^{\circ}C{\sim}30^{\circ}C$ and pseudomonas sp. was $30^{\circ}C-35^{\circ}C$. The optimum initial concentration of mthanol was determined as 1-2% in Acinetobacter sp. and 2-3% in pseudomonas sp. 2. The optimum concnetrations of nitrogen source, micro-elements, and vitamins such as biotin and thiamine-HCl in Acnetobactar sp. were 1g $(NH_4)_3SO4,\;1{\sim}3mg\;Mn^{++},\;4mg\;Fe^{++},\;10{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine-HCl per liter medium. In the Pseudomonas sp., 2g $(NH_4)_3SO4,\;1mg\;Mn^{++},\;trace\;amounts\;of\;Fe^{++},\;5{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine HCl per liter were effective. Maximum biomass yield was 2.5g/l in Acinetobacter sp. and 4.8g/l in Pseudomonas sp. 3. Protein composition of the two strains exhibited that alkai-labile protein was higher than alkali-stable protein. In Pseudomonas sp., the contents of acid soluble fraction and alkali-stable protein of the cells grown in the methanol medium were higher than in sucrose medium. On the other hand, in Acinetobacter sp., alkalilabile protein of the cells grown in sucrose medium was higher than in methanol medium.

• KSBB Journal
• /
• v.21 no.4
• /
• pp.267-272
• /
• 2006

Five strains producing ethanol were isolated from soil near traditional alcohol production factory in Gwangju, Korea. One of the isolated strains maintained relatively stable ethanol production in shaking culture. The isolated strain KJ was proved to be Saccharomyces italicus, based on several biochemical and morphological tests containing assimilation of carbon compounds. In investment of the most suitable carbon for ethanol production, ethanol concentration of 5.46 g/L and yield of 0.53 g-ethanol/g-glucose were obtained in condition of glucose 10 g/L in YM medium. Experimental optimal conditions for ethanol fermentation by S. italicus KJ were as follows; temperature $30^{\circ}C$, initial pH 5.0, initial concentration 10% of glucose, anaerobic condition in the liquid cultivation. When enzymatically saccharified food wastes(SFW) were used as the production medium, ethanol production yield was 0.57 g-ethanol/g-reducing sugar. Therefore, SFW will contribute to lower the production cost of ethanol for industrial application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.269-272
• /
• 2002

This study was carried out to investigate varietal differences on growth characteristics under the conditions of PE film-mulching and non-mulching in sesame. At maturing stage from 76 to 95 days after sowing, Yangbaeckkae, non-branching plant type, under non-mulching showed larger leaf area index (LAI) than that of film-mulching, while plant height and the number of capsules per plant were similar to those of film-mulching. LAI of Ahnsankkae, branching plant type, under non-mulching was similar to film-mulching, while plant height and the number of capsules per plant were smaller than those of film-mulching. Net assimilation rate (NAR) of two varieties under non-mulching was lower at seedling stage from 25 to 35 days after sowing but higher at flowering stage from 45 to 55 days after sowing. At maturing stage from 66 to 77 days after sowing, NAR and crop growth rate (CGR) of Yangbaeckkae under non-mulching were greater than those of film-mulching, whereas those of Ahnsankkae under non-mulching were lesser than those of film-mulching. Yield under non-mulching was decreased by 7 % in Yangbaeckkae and 33 % in Ahnsankkae compared with that of film-mulching, therefore Yangbaeckkae was more adaptable for non-mulching than Ahnsankkae. Main factors decreasing yield of Yangbaeckkae under non-mulching were small LAI, NAR, and CGR at the stage of young seedling, and small number of capsules at early maturing stage from first flowering to 20 days after first flowering.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.657-661
• /
• 1989

Symmetrical divinyl ketone or divinyl ${\alpha}$-diketone was synthesized in moderately good yields through palladium catalyzed carbonylative homocoupling reaction of vinylmercuric chlorides with carbon monoxide. In order to find out optimum synthetic reaction conditions, we examined the effect of catalysts, bases, solvents and reaction temperature when (E)-styrylmercuric chloride was used as a typical starting material. The best yield of divinyl ${\alpha}$-diketone was obtained in the reaction using 10 mol% of dichlorobis(triphenyl phosphine)palladium (II) as a catalyst, an equivalent of pyridine as a base, 10 mol% of iodine and acetonitrile at 50${\circ}$C under 10 atmospheric pressure of carbon monoxide. The yield of divinyl ${\alpha}$-diketone was decreased under atmospheric pressure of carbon monoxide.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.197-207
• /
• 2000

A transient heat transfer analysis and thermo-elastic analysis have been performed for the residual stress distribution on the fillet weldment used by finite element method. Specimen is fabricated single-pass fillet welding. This computation was performed for conditions including surface heat flux and temperature dependent thermo-physical properties using by heat input as parameter. Also, cut-off temperature of residual stress estimation by thermo-elastic analysis is determined. The fillet weldment were measured to determined their residual stress distributions for using hole-drilling method. As result, it was found that large tensile residual stress is about material yield strength, and the numerical simulation results for finite element method similar to residual stresses by hole-drilling method and other exiting research. Also, cut-off temperature is effectively determined by temperature which calculated maximum thermal stress equal to material yield strength.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.111-120
• /
• 1999

A bacteriocin-producing strain, J-105, was isolated from Kimchi and identified as Lactococcus sp. The optimum conditions for the bacteriocin production from the isolated microorganism were evaluated. For maximum yield of bacteriocin from Lactotoccus sp. J-105, the cell should be harvested at the early stationary phase and temperature, pH and NaCl concentration should be $25^{\circ}C$, pH 8.0 and without the addition of NaCl, respectively. Maltose should be used as a carbon source and organic nitrogen such as polypeptone should be used as a nitrogen source for the best yield. The bacteriocin from isolate was inhibitory against Acetobacter aceti, Bacillus subtilis and several strains of lactic acid bacteria. The bacteriocin of J-105 was sensitive to pepsin, but stable for heat treatment. It was stable even at autoclaving temperature for 15 min.

• Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.130-135
• /
• 2000

Photodegradation rate of flupyrazofos in aqueous solution were measured under various test conditions mainly following the guidelines of U.S. EPA and OECD. It was observed that the flupyrazofos was degraded by simple hydrolysis but not degraded by light in pure water. Using acetone as a known photosensitizer, the minimal concentration of acetone needed to photo-degrade the flupyrazofos in % and molar terms were 0.047% and 0.006, respectively. When treated with acetone, it was also found that the ringlet oxygen is a very effective photo oxidant in the degradation of flupyrazofos, but the effect of hydroxyl radical was not observed at the treatment level of hydroxyl radical, isopropylbenzene. In an actinometer experiment, quantum yield of flupyrazofos (0.4 ppm with 2% acetone) was $17.66{\times}10^{-5}$ and degradation rate and half-life were 0.038/hr and 18.2 hours, respectively.

• Research in Plant Disease
• /
• v.11 no.2
• /
• pp.122-127
• /
• 2005

Late blight of potato caused by Phtophthora infestans is one of the most destructive disease in organic farming as well as in the conventional cultivation in Korea. Incidence and progress of the disease largely depend on climatic conditions around the fields. However, the disease completely destroys whole leaves of the plant within two weeks in organic farming fields. While, potato leaves in conventional farming fields remain healthy for 5 weeks after the first symptom appearance, because fungicides were applied four times in average to control the disease. Area under disease progress curve (AUDPC) of organic farming fields ranged from 2314 to 2421 and quickly expanded compare to that of conventional farming fields. The tuber yield in the organic farming fields ranged from 0.96 ton per 10a to 1.5 ton per 10a, while it was 2.7 ton per 10a in conventional farming fields. Tuber yields were reduced to $42\~63\%$ by the infection of late blight and the reduction rate was closely related with the time of first occurrence of the disease in organic farming fields. Physiological races of the pathogen were diversified with R0,1,3,4,5,7,10,11 in organic farming fields at Hongchun area. Pathogen races were distributed with similar pattern at different areas of organic farming fields.