• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.784-787
• /
• 2003

Electrorheological(ER) and magnetorheological(MR) fluid-based dampers are typically analyzed using Bingham-plastic shear model under quasi-steady fully developed flow conditions. A Herschel-Bulkley constitutive shear flow relationship is that the linear shear stress vs. strain rate behavior of Bingham model is replaced by a shear stress that is assumed to be proportional to a power law of shear rate. This power is called the flow behavior index. Depending on the value of the flow behavior index number, varying degrees of post-yield shear thickening or thinning behavior can be analyzed. But it is not practical to analyze the damping force in a flow mode damper using Herschel-Bulkley model because it is needed to solve a polynomial equation. A useful guide is suggested to analyze the damping force in a damper using the Herschel-Bulkley model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.577-584
• /
• 2003

A crack with growth in ferroelectric ceramics under purely electric loading is analyzed. The crack tip stress intensity factor for the growing crack under small-scale conditions is evaluated by employing the model of nonlinear domain switching. The crack tip stress intensity factor increases or decreases with crack growth, depending on the electrical nonlinear behavior and the direction of an applied electric field. It is shown that the ferroelectric material can be either toughened or weakened as the crack grows. The steady state crack growth in ferroelectric ceramics is also discussed.

• Journal of Photoscience
• /
• v.1 no.2
• /
• pp.89-94
• /
• 1994

The reaction of decaborane with trimethylsilyldiazomethane gives 1, 2-bis (trimethylsilyl)-1, 2-carba-closo-dodecaborane(12). This compound is similar to the icosahedral cage structure of o-carborane. This formation of the first adduct proceeds through deprotonation of the acidic center of B(9) and B(6) by intermolecular attack by the lone electron pair of the carbene, : CHSiMe$_3$. The yield of product is influenced by irradiation and thermal conditions.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.59-62
• /
• 2001

Flow induced vibration in steam generators has caused dynamic interactions between tubes and contacting materials resulting in fretting wear . Series of experiments have been performed to examine the wear properties of Inconel 690 steam generator tubes in various environmental conditions. For the present study, the test rig was designed to examine the fretting wear and rolling wear properties in high temperature(room temperature - 290。C) water. The test was performed at constant applied load and sliding distance to investigate the effect of test temperature on wear properties of the steam generator tube materials. To investigate the wear mechanism of material, the worn was observed using scanning electron microscopy. The weight loss increase at higher test temperature was caused by the decrease of water viscosity and the mechanical property change of tube material. The mechanical property changes of steam generator tube material, such as decrease of hardness or yield stress in the high temperature tests. From the SEM observation of worn surfaces, the severe wear scars were observed in specimens tested at the higher temperature.

• Transactions of Materials Processing
• /
• v.6 no.4
• /
• pp.300-310
• /
• 1997

A finite element inverse method is introduced for direct prediction of blank shapes, strain distributions, and reliable intermediate shapes from desired final shapes in axisymmetric multi-step deep drawing processes. This mothod enables the determination of process disign. The approach deals with the Hencky's deformation theory. Hill's second order yield criterion, simplified boundary conditions, and minimization of plastic work with constraints. The algorithm developed is applied to motor case forming, and cylindrical cup drawing with the large limit drawing ratio so that it confirms its validity by demonstrating resonably accurate numerical results of each problem. Numerical examples reveal the reason of difficulties in motor case forming with corresponding limit diagrams.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.841-844
• /
• 2002

The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.

• The Korean Journal of Cytopathology
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2006

Urine cytology is the most useful technique for detecting either primary or recurrent neoplasms in the urinary tract. Although urine cytology is the traditional method of detecting these neoplasms, its diagnostic accuracy has been underevaluated because of low sensitivity. The cytologic interpretation of urinary samples is not an easy task, even with some expertise in this area, for many reasons. In low-grade urothelial carcinoma, no reliable or reproducible diagnostic cytologic criteria can be provided because of the lack of obvious cytologic features of malignancy, which is one of the main factors lowering its diagnostic accuracy. Many diagnostic markers have been developed recently to enhance its diagnostic yield, but the results have not been satisfactory. However, urine cytology plays a role in detecting high-grade urothelial carcinoma or its precursor lesions. It still shows higher specificity than any of the newly developed urine markers. Understanding the nature of urine samples and the nature of neoplasms of the urinary tract, recognizing their cytologic features fully, and using cytologic findings under appropriate conditions in conjunction with a detailed clinical history would make urine cytology a very valuable diagnostic tool.

• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.40-48
• /
• 1990

Bake hardenability of batch annealed steel sheets is investigated in connection with the amount of tensile deformation and the bake hardening condition. This study associates with the method for producing bake hardening materials by means of batch annealing process and for measuring bake hardenability which is not yet fully established. The experimental result demonstrates the relationship between strain distribution and bake hardening behavior in various bake hardening conditions, which provides an essential information for automobile design and related sheet metal forming in a press shop. The result also shows the bake hardenability of the tested material increases as the baking temperature is increased from 150.deg. C. The result assures the bake hardening materials can guarantee reasonably high strength as well as good uniformity in yield strength for the automobile body by sheet metal forming process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.165-172
• /
• 2000

The VDC(Vehicle Dynamic Control) is a control system whose target is to improve stability of a vehicle under lateral motion. A lateral vehicle motion, especially on a slippery road, can lead to a hazardous situation, and the situation can even worsen by the driver`s inappropriate response. In this paper, two VDC systems, a fuzzy-based controller and an LQR-based controller have been developed. The controllers take as input the yaw rate and the sideslip angle of either body or rear wheel, and they yield the direct yaw moment signal by which the vehicle can gain stability during cornering. Simulations have been conducted to evaluate the performance of the control system. The results indicated that the controllers can successfully improve vehicle stability under potentially dangerous driving conditions.

• Journal of Life Science
• /
• v.6 no.2
• /
• pp.120-128
• /
• 1996

In the screening of actinomycetes culture filtrate for inhibitor of adenosine deaminase, a novel inhibitor was found in a cultured broth of strain J-144K. The optimum conditions for the adenosine deaminase inhibitor production from the isolated strain J-144K were evaluated. This strain showed the maximum yield of adenosine deaminase inhibitor when grown at pH 7.0 and 30$\circ$C for 60 hours in the medium of 1.0% dextrose, 0.5% yeast extract, 0.5% peptone and 0.1% KH$_{2}$PO$_{4}$ under the aerobic condition. Through the activated charcoal extraction, methanol fractionation, Dowex 50 H$^{+}$ X-8 ion exchange column chromatography, Dowex CI$^{-}$ X-8 ion exchange column chromatography, and Sephadex G-15 gel filtration procedures, this inhibitor was purified with three materials.