• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1140-1151
• /
• 2004

This paper reports on the finite elements analysis for die compaction process of cemented carbide tool parts. Experimental data were obtained under die compaction and triaxial compression with various loading conditions. The elastoplastic constitutive equations based on the yield function of Shima and Oyane were implemented into an explicit finite element program (ABAQUS/Explicit) and implicit finite element program (PMsolver/Compaction-3D) to simulate compaction response of cemented carbide powder during die compaction. For simulation of die compaction, the material parameters for Shima and Oyane model were obtained by uniaxial die compaction test. Explicit finite element results were compared with implicit results for cemented carbide powder.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.71-75
• /
• 2006

The application of focused ion beam (FIB) technology in micro/nano machining has become increasingly popular. Its usage in micro/nano machining has advantages over contemporary photolithography or other micro/nano machining technologies such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. The target of this paper is the analysis of FIB sputtering process according to tilt angle, dwell time and overlap for application of 3D micro and pattern fabrication and to find the effective beam scanning conditions using Taguchi method. Therefore we make the conclusions that tilt angle is dominant parameter for sputtering yield. Burr size is reduced as tilt angle is higher.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.540-545
• /
• 1996

A facultative anaerobe Enterococcus faecium 19-46-4 was used to study the production of an antimicrobial substance in anaerobic conditions. Major part of the antibiotic activity was found in the culture filtrate of the bacterium. The active compound was extracted by an equal volume of iso-butanol and concentrated in vacuo (at 50$\circ$C) before purification by C-18 liguid column chromatography and HPLC. A chromatographically pure compound was obtained by two passages of HPLC columns, The compound appeared as a pale-yellow powder. The yield was about 2.5 mg 1$^{-1}$ culture filtrate. The compound was named as KIST 194. KIST 194 were identified as cholic acid (3$\alpha$, 7$\alpha$, 12$\alpha$-trihydroxy-5$\beta$-cholan 24-oic acid) based on its physico-chemical properties determined by UV, IR, $^{1}H-NMR, $^{13}$C-NMR, El-MS and LC-MS.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.613-618
• /
• 1996

Microorganisms capable of producing ascorbic acid-2-phosphate (AsA2P) from ascorbic acid (AsA) and pyrophosphate (PPi) were screened from the culture collection of this laboratory. Among them, Cellulomonas sp. AP-7 showed the highest productivity of AsA2P. The optimal conditions for the production of AsA2P from AsA and PPi with cell-free extract as an enzyme source were investigated. The reaction mixture for the maximal production of AsA2P consisted of 21 g protein of cell-free extract per liter as the enzyme source, 250 mM AsA, 200 mM sodium pyrophosphate, 150 mM sodium acetate buffer (pH 4.5). By using this reaction mixture, 31.9 mM of AsA2P, which corresponded to a 12.76% yield based on AsA, was produced after incubation of 48 hr at 33$\circ$C.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.6
• /
• pp.1805-1818
• /
• 2015

In this article, we first consider a linear multiplier fractional q-differintegral operator and then use it to define new subclasses of p-valent analytic functions in the open unit disk U. An attempt has also been made to obtain two new q-integral operators and study their sufficient conditions on some classes of analytic functions. We also point out that the operators and classes presented here, being of general character, are easily reducible to yield many diverse new and known operators and function classes.

• Journal of Advanced Navigation Technology
• /
• v.2 no.1
• /
• pp.11-21
• /
• 1998

There have been active research efforts in the development of a dual-use millimeter-wave radiometer as an aircraft landing aid in low visibility conditions. In this paper, we constructed a radiometer operating at the Ka-band where it is relatively easy to build RF components. The radiometer is used to collect radiometric signatures of some vehicles and land surfaces. Measured signatures suggest that vehicles with metallic surfaces yield signatures markedly different from nearby land surfaces so that they can easily be detected by a simple radiometer.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.129-134
• /
• 2000

Recently, HIPS(High Impact Polystyrene) materials are spot-lighted as office equipment, home electronics, electronics appliances housing, packing containers, etc. But its using are occur to problem caused by fatigue fracture. However, its strength is larged affected by environmental conditions. So, in this paper it tried to analyze the effect of temperature by tensile test and fatigue test. It was observed that yield strength and ultimate strength, fatigue life of same stress decreased relatively with increase temperature. Further, this paper predict S-N curve using the result of tensile test and micro vickers hardness test. For this purpose, the management in the engineering department is able to design the fatigue life of HIPS(HR-1360) materials.

• Kyungpook Mathematical Journal
• /
• v.52 no.3
• /
• pp.245-264
• /
• 2012

We determine lens surgeries (i.e. Dehn surgery yielding a lens space) along the n-twisted Whitehead link. To do so, we first give necessary conditions to yield a lens space from the Alexander polynomial of the link as: (1) n = 1 (i.e. the Whitehead link), and (2) one of surgery coefficients is 1, 2 or 3. Our interests are not only lens surgery itself but also how to apply the Alexander polynomial for this kind of problems.

• Mycobiology
• /
• v.47 no.4
• /
• pp.483-493
• /
• 2019

Antrodia cinnamomea is a unique medicinal fungus in Taiwan. It has been found rich in some pharmacologically active compounds for anti-cancer, hangover, and immune regulation etc. With the in-depth study of these components, it would be interesting and important to establish a molecular system for basic studies of A. cinnamomea. Thus, we would like to set up a foundation for this purpose by studying the A. cinnamomea protoplast preparation and regeneration. Firstly, we studied the optimization method of protoplast preparation of A. cinnamomea, and found various factors that may affect the yield during protoplast preparation, such as mycelial ages, pH values, and osmotic stabilizers. Secondly, in the regeneration of protoplasts, we explored the effects of various conditions on the regeneration of protoplasts, including different media and osmotic pressure. In addition, we found that citrate buffer with pH value around 3 dramatically increased the regeneration of protoplasts of A. cinnamomea, and provided a set of regeneration methodology for A. cinnamomea.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.101-104
• /
• 1997

Lactic acid production from ${\alpha}$-cellulose by simultaneous saccharification and fermentation (SSF) was studied. The cellulose was converted in a batch SSF using cellulase enzyme Cytolase CL to produce glucose sugar and Lactobacillus delbrueckii to ferment the glucose to lactic acid. The effects of temperature, PH, yeast extract loading, and lactic acid inhibition were studied to determine the optimum conditions for the batch processing. Cellulose was converted efficiently to lactic acid, and enzymatic hydrolysis was the rate controlling step in the SSF. The highest conversion rate was obtained at 46$^{\circ}C$ and pH 5.0. The observed yield of lactic acid from ${\alpha}$-cellulose was 0.90 at 72 hours. The optimum pH of the SSF was coincident with that of enzymatic hydrolysis. The optimum temperature of the SSF was chosen as the highest temperature the microoraganism could withstand. The optimum yeast extract loading was found to be 2.5g/L. Lactic acid was observed to be inhibitory to the microorganisms' activity.