• Bulletin of the Korean Mathematical Society
• /
• v.40 no.2
• /
• pp.195-205
• /
• 2003

For the boundary value problem (BVP) of second order functional differential equations for the one-dimensional $\rho$-Laplaclan: ($\Phi$$_{\rho}$(y'))'(t)+m(t)f(t, $y^{t}$ )=0 for t$\in$[0,1], y(t)=η(t) for t$\in$[-$\sigma$,0], y'(t)=ξ(t) for t$\in$[1,d], suitable conditions are imposed on f(t, $y^{t}$ ) which yield the existence of at least two positive solutions. Our result generalizes the main result of Avery, Chyan and Henderson.

• KIEAE Journal
• /
• v.9 no.4
• /
• pp.37-42
• /
• 2009

Photovoltaic-thermal(PVT) collectors are a combination of photovoltaic modules with solar thermal collectors, forming one device that receives solar radiation and produces electricity and heat simultaneously. The PVT collectors can produce more energy per unit surface area than side by side PV modules and solar thermal collectors. There are two types of water type PVT collectors, depending on the existence of glass cover over PV module; glass-covered(glazed) PVT module, which produces relatively more thermal energy but has lower electrical yield, and uncovered(unglazed) PVT module, which has relatively lower thermal energy with somewhat higher electrical performance. In this paper, the experimental performance of two types of the water-based PVT combined collectors, glazed and unglazed, was analyzed. The electrical and thermal performances of the PVT combined collectors were measured in outdoor conditions, and the results were compared.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.328-328
• /
• 2006

On mixing of 1,3-dehydroadamantane, 1, with electron-deficient vinyl monomers such as acrylonitrile and methyl acrylate in THF at r.t. in the absence of any initiator, the copolymerization spontaneously proceeded to give alternating copolymers in 28-88 % yield. By contrast, no reaction of 1 occurred, when isobutyl vinyl ether or styrene was mixed under the similar conditions. These contrastive results indicate the high electron density of a central s-bond in a strained [3.3.1]propellane derivative, 1. Alternating sequences of the resulting copolymers were characterized by NMR and MALDI-TOF-MS measurements. DSC and TGA measurements revealed the high thermal stability of the alternating copolymers containing bulky and stiff adamantane skeletons.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.337-337
• /
• 2006

The synthesis of an octafunctional resorcinarene based initiator for nitroxide mediated polymerization and its ability to yield random star copolymers of styrene and methyl methacrylate is studied. The effect of the initiator conformations towards its activity and the conditions that permit the formation of well-defined star block copolymers is also investigated in detail. The characterization of the initiator and the polymers were carried out by various spectro-analytical techniques. Well-defined random copolymers were obtained with controlled molecular weight and low PDI depending on the monomer feed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.8
• /
• pp.81-87
• /
• 1993

The growth thickness uniformity of epitaxial layers deposited using a moiecular beam epitaxy system is calculated from the arrangement of molecular beam source and the substrate and the geometric dimensions of the crucible in order to predict the optimum design conditions of the prototype MBE system. The thickness uniformity better than 5% over a 3-inch wafer can be obtained by keeping the distance between the substrate and the crucible's orifice longer than 20cm, the tapering angle of the crucible larger than 6$^{\circ}$, and the angle between the normal to the substrate at the center and the crucible axis as larger as possible. In addition, the growth yield decreases to below 51% as the distance between the substrate and the orifice becomes longer than 25cm.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.49-54
• /
• 1965

One of the difficult and time consuming problems in the production of magnesia from sea water is a settling rate of magnesium hydroxide. In this experiments, authors attempted to accelerate its settling rate by addition of various sedimenting agents as C.M.C., Separan and Starch, and sought for optimum calcination temperature for domestic dolomite, as alkali source, mole ratio of dolomite milk to bittern. It is observed through experiments that the small amounts of sedimenting agents, C.M.C., Separan, starch, 20 mg/l, 40 mg/l, 400mg/l, respectively increase the settling rate of magnesium hydroxide by 8 times or more. The following conditions resulted in good yield of magnesium hydroxide from sea water with relatively tolerable calcium oxide contaminated for the magnesium clinker. Calcinating temperature, $1,100{\sim}1,200^{\circ}C$, mole ratio of 10% dolomite milk to magnesium salts in sea water or bittern, 1. 2 : 1.

• Korean journal of applied entomology
• /
• v.26 no.4 s.73
• /
• pp.269-272
• /
• 1987

Effects of dithane flowable and dithane M-45 on the control of opium poppy downy mildew were examined under field conditions. Application of these two fungicides significantly reduced the disease and increased latex yield, compared to other non-systemic fungicides.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1743-1748
• /
• 2014

A facile and effective method has been developed for the synthesis of a novel series of benzofuran derivatives via N-acylation, O-alkylation and intramolecular condensation reactions, starting from readily available substituted o-hydroxy aryl ketone, and chloroacetyl arylamides. This metal-free transition process is characterized by mild reaction conditions, atom economy, short reaction time and a high yield with a decreased amount of by-products.

• Transactions of Materials Processing
• /
• v.16 no.6
• /
• pp.447-451
• /
• 2007

The springback characteristics of AZ31B magnesium alloy sheet was investigated in OSU draw/bend test Springback is the elastically-driven change of shape of a part after forming and it should be estimated and controlled to manufacture more precise products in sheet forming. Magnesium alloy sheets have unique mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening response. So, there will be a difference in the prediction of springback with symmetric mechanical properties for magnesium alloy sheets. In this work, the Strip draw/bend tests were conducted with various conditions - die radius, sheet thickness and controlled tensile force and the tendency of springback angle was observed from the tests.

• Journal of Environmental Health Sciences
• /
• v.27 no.4
• /
• pp.79-83
• /
• 2001

The sludge wastes fermentation process reactors were operated to produce the VFAs(volatile fatty acids) as supplemental carbon sources and to determine the optimum operating conditions. The experiment was carried out by varied mixture ration of 400:0 350:30 300:100 200:200 and operating temperature 2$0^{\circ}C$ 3$0^{\circ}C$ and 4$0^{\circ}C$ The results were as follows: Higher VFAs production rate observed at higher mixed ratio of primary sludge. When the mixed ratio of primary sludge and return sludge were 400:0 350:50 300:100 200:200 respectively. VFAs production are were 829.6mg/l 944.2 mg/l 597.9mg/ml an d441.6 mg/l , respectively. the yield of VFAs increased with temperature, but decreased with initial TSS concentration Because fermented sludge has relatively low nitrogen and phosphorus and relatively high VFAs it can be used as a substitute for external carbon in biological nutrient removal process.