• Analytical Science and Technology
• /
• v.22 no.3
• /
• pp.263-271
• /
• 2009

The purpose of metal artifacts conservation is recovering the original state of objects and preventing it from further corrosion. Four different consolidants are selected that are widely used for bronze objects conservation. This study found out the characteristics of thin film by various experiments and analysis for the bronze plates coated using each solutions. After a series of analysis, resin B and V showed good coating properties. However, the evaluation point suited to this purpose are adhesive strength, stability against yellowing and corrosion resistance. Therefore, resin B of four different consolidants could expect to get the most suitable consolidation effect for consolidation purpose.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.107-112
• /
• 1968

In order to study the effect of potash on the growth and yields of Soybean at different level of soil fertility and application of fertilizer (nitrogen, phosphate and calcium), $2^3$factorical experiment was carried out by pat culture with variety 'Chang-dan-baec-muc' which is most spreaded variety in Korea. The experiment consisted of five replications in a randomized block experiment with three factors (soil, fertilization and potash). Treatment were at two levels; infertile and fertile soil, none and some of fertilization and potash. Thus, the experiment comprised eight treatment combinations which consisted of all combinations. The results of this experiment are as follows: 1. No effect of each of three factors on flowering date was found. 2. Leaf-yellowing and maturing date was quickened on the fertile soil but no effect of fertilization and potash was found. 3. More premature leaf-yellowing was found on the fertile soil. 4. Deeper leaf colour cuss showed on the fertile soil and in the case of fertilization but no effect of potash was found. 5. Increasing tendency of following character: length and width of leaf, height and dia of stem, number of branches and pods; was most remarkable on the fertile soil. Application of fertilizer showed also remarkable tendency of increasing, while increasing tendency of potash was the least. 6. Same tendency was found with following charactors; weight of total plant. stem and shell, and commercial grains, weight of 100 grain and number of commercial grains. 7. As the results of analysis of variance for weight of commercial grain it, was found the teach of the three factors increased soybean yields significantly (weight of commercial grain) but the effect of potash was less than the other two factors. No significant interaction was found among three factors. 8. Greater effect of potash on increasing soybean yields was found on the fertile soil, and in the case of fertilization.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.156-161
• /
• 2013

Phenolic antioxidants are effective stabilizers that provide excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. However, under a selected set of circumstances, certain types of phenolics have been susceptible to discoloration due to prolonged storage in an environment containing oxides of nitrogen. It is investigated that the effect of addition of secondary antioxidant and chemical structure of primary antioxidant on discoloration of amorphous poly-${\alpha}$-olefin (APAO), which is especially prone to be decomposed in high processing temperature. From the result, it is concluded that a higher level of steric hindrance of phenolic antioxidant provided by long alkyl chain allows a more enhanced synergic effect with secondary antioxidant.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.2
• /
• pp.192-198
• /
• 1999

A pot experiment was carried out to investigate the effect of boron on the growth, symptom, yield, and content of boron in Perilla(Perilla frutescens var. japonica HARA), Melon(Cucumis melo L.) and Cucumber(Cucumis sativus L.). The results obtained are as follows. Perilla. melon and cucumber uptake a lot of boron from the soil, and toxic effects of boron result in leaf tip yellowing by progressive necrosis. Yield of perilla, melon and cucumber are decreased at the $3{\sim}5mg\;kg^{-1}$, $5{\sim}10mg\;kg^{-1}$ of boron applicated in soil, respectively. Boron content in the leaf is the highest among various parts plant, and the tip and margin of the leaf contained more boron than central part of the leaf. Boron applicated was moved and accumulated to the plant and soil.

• Korean Journal of Weed Science
• /
• v.16 no.1
• /
• pp.28-35
• /
• 1996

Tetrapion(2,2,3,3-tetrafluoropropionate sodium) has commonly been used for reed(Phragmites communis Trin.) control in uncultivated areas, especially in Japan. As an attempt to establish the screening system for selective herbicide controlling reed, tetrapion was tested as a standard herbicide to various weeds and crops including rice in a greenhouse. Symptoms of yellowing, twisting, stunting, and necrosis were observed in the herbicide-treated plants. The herbicide caused a severe damage on all crops examined, except cotton. Both direct seeded and transplanted rice were also sensitive to the herbicide. Its herbicidal activity was generally higher on grass weeds than on broadleaf weeds. It had a higher herbicidal activity with preemergence treatment than with postemergence treatment. In addition, field and greenhouse experiments were conducted to examine the effect of the herbicide on reed control. Its effect varied with the soil type of the treated field and the growth stage of reed. A relatively high dosage of the herbicide was required to control reed. It had an almost same effect on fairygrass(Miscanthus sinensis Anderss) as on reed. However, reed grown in a greenhouse was effectively controlled by the herbicide, having more effect with preemergence treatment than with postemergence treatment as observed in other plants treated with the herbicide. In conclusion, tetrapion has a great potential as a standard herbicide during the herbicide screening for selective reed control.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.142-146
• /
• 2016

Ripening conditions of the winter squash 'Bochang' were evaluated. Soluble solids contents increased as the ripening duration was prolonged and with higher temperature. After harvest, the Hunter 'b' value of the skin was 2.42. At 25 and $30^{\circ}C$, the Hunter 'b' values were recorded at approximately 6.91 and 7.56, respectively. At $35^{\circ}C$, the Hunter 'b' value was increased to about 7.79 on day 9. Furthermore, at $35^{\circ}C$, the appearance quality was reduced with a yellowing phenomenon of the pericarp observed after 9 days. The starch contents also decreased with higher temperature, and sucrose contents increased in all ripening conditions with a longer period and higher temperature. Overall, these results indicate that ripening conditions of $25^{\circ}C$ for 18-21 days and at $30^{\circ}C$ for 12-15 days are suitable for the optimum ripening of winter squash.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.336-344
• /
• 2011

The study attempted to find out any effect to prevent photo aging of epoxy resin used for conservation by way of adding UV stabilizer, one of plastic additives. Specimens were made by adding HALS and UVA UV stabilizer as each concentration to 3 kinds of epoxy resin, which are most frequently used for artifacts joining and restoration process, and aging effects were investigated through Color change, SEM, contact angle, FTIR analysis during UV aging experiments. Last, usage suitability was checked when UV stabilizer was added through Universal Tensile strength tester. In result, it is impossible to prevent decomposition of chemical structure in spite of adding UV stabilizer but in the case of epoxy A and R, it is believed that photo aging such as yellowing or crack can be minimized without giving a big influence to adhesive strength of epoxy resin through adding less than 0.1% of UVA. It is expected that above will solve photo aging problem of epoxy resin used for joining and restoration of artifacts and will extend its life as joining and restoration materials.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1882-1888
• /
• 2008

Effects of 1-MCP(1-methylcyclopropene) on the postharvest life and fruit quality of cucumber 'Baekdadaki' were investigated. Cucumber were held at room and cold chamber($10^{\circ}C$) treated with several concentrations of 1-MCP. Physico-chemical characteristics such as fresh weight and firmness were greatly varied during storage, and the treatment with I-MCP(500ppb) showed the minimal loss of the values at harvest. The peel b value representing a senescence process was higher investigated in 1-MCP(250 and 1,000ppb treatment, and led to the apparent yellowing and softening after cold storage for 15 days. 1-MCP(500ppb) showed lower decay rate and better marketability of cucumber than other treatments after cold storage for 15 days. The respiration rate was higher found in cucumber treated with 1-MCP(250ppb) than in other treatment. Ethylene evolution was most detected in cucumber treated with 1-MCP(1000ppb) after room storage for 6 days. 1-MCP did not affect the production of ethylene in cucumber during room and cold storage.