• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.123-141
• /
• 1989

The purpose of this study was to investigate the tendency of color change of ceramic, and its mechanism un der the influence of Pd-Ag alloy. The specimens were made by firing porcelain on tile metal plates cast with Au-Pt alloy, Pd-Cu alloy and Pd-Ag alloy. In the case of Pd-Ag alloy, specimens were fired under three different conditions as follows, 1) without protection, 2) protection with ceramic metal conditioner, 3) protection with carbon block. For the specimens of element analysis, a barrier was constructed with platinum foil between metal plate and ceramic. Color change was measured with colorimeter and elemental changes in ceramic were calculated with DC argon plasma emission spectrophotometer. The results were as follows : 1. Color change of ceramic by Pd-Ag alloy was negligible in hue, but decreased in value and increased in chroma (yellow discoloration). 2. Color change of ceramic by Pd-Ag alloy was appeared through vapor transport mechanism. 3. As the protection method for the color change of ceramic by Pd-Ag alloy, application of ceramic metal conditioner was superior to utilization of carbon block.

• 한국의류학회지
• /
• 제35권12호
• /
• pp.1507-1517
• /
• 2011

Berberine, palmatine, and Phellodendron bark dye was prepared in methanol for HPLC-DAD-MS analysis of liquid dye. Silk was dyed using berberine, palmatine, and Phellodendron bark dye prepared in water. The dye was extracted from the dyed silk using the HCl/methanol/water (2:1:1 v/v/v) solvent system with a slight modification. The liquid dyes and the dye extracted from the silk samples dyed with the three dye sources were examined using the HPLC-DAD-MS analysis to simultaneously detect berberine and palmatine from the plant dye and the dyeings. Colorimetric measurement was carried out using a spectrophotometer to examine the color and the intensities of berberine, palmatine, and Phellodendron bark dyed silk samples. From the liquid dyes, berberine eluted at 5.21 min with the molecular cation m/z=336 and the UV spectrum confirming that the product was berberine. Palmatine eluted at 5.12 min with the molecular cation m/z=352 and the UV spectrum confirming that the product was palmatine. From the silk dyed with berberine and palmatine dye, berberine and palmatine species eluted at 5.35 min and 5.24 min, respectively. From the silk dyed with Phellodendron bark, berberine and palmatine were detected simultaneously at 5.35 min and 5.26 min, respectively. All three dyes had yellow hue while palmatine dyed silk showed the highest hue and chroma. Palmatine dyed silk showed the highest K/S value that indicated the strongest color intensity and the highest dye uptake.

• 한국의류학회지
• /
• 제48권3호
• /
• pp.543-562
• /
• 2024

This study used persimmon juice, shuliang, and mud to develop the color of hanji fabrics. Persimmon juice and shuliang were used to perform single and mixing dyeing with heat treatment using the pad-dry-cure (PDC) method. Next, mud dyeing was performed, and the hanji fabrics dyed with persimmon juice and shuliang were developed into Yellow Red (YR) Munsell colors with very low values and chroma. Through scanning electron microscopy, the persimmon juice and shuliang were observed to be evenly treated on the hanji fabrics using the PDC method. Furthermore, the presence of iron ions in the dyed fabrics was confirmed using inductively coupled plasma-mass spectrometry analysis. The stiffness of the fabrics dyed with persimmon juice was the greatest, while it gradually decreased for the fabrics treated with mixing and mud dyeing. With mixing dyeing, the colorfastness to washing improved to grade 4, whereas with mud dyeing, the colorfastness to alkaline sweat greatly improved to grade 4~4-5. Based on these findings, this study confirmed that it is possible to develop hanji fabrics with differentiated textures and colors while ensuring practical colorfastness through mixing and mud dyeing.

• 한국가정과학회지
• /
• 제3권1호
• /
• pp.51-63
• /
• 2000

The purpose of this study was to identify the best dyeing conditions using onion's outer shell. and to apply to the method in practical daily life. To do this. we extracted quercetin from onion's outer shell and dyed several natural fabrics such as cotton, slack mercerized cotton, ramie. and silk. under the different conditions. Dyed fabrics were Investigated in the aspect of dyeability and colorfastness. The effective conditions for the light-fastness and washing-fastness also have been studied. The results of the experiment were varied with such conditions as temperature. time. pH degree. and treatment and types of mordants. The results are as follows ; 1. Fabrics dyed with onion's outer shell showed excellent dyeability even though there were no mordants, and the silk fabric dyed better than both cotton and ramie fabric. Furthermore, in the cases of repeated dyeing and treatment of mordants using AIK(SO$_4$)$_2$.12$H_2O$ and CuSO$_4$,.5$H_2O$ dyeability of specimen had been improved 2. Cellulose fabrics such as cotton, mercerized cotton and ramie showed the best dyeability under relatively low temperature in the range of 20~4$0^{\circ}C$. On the contrary to cellulose fabric, silk fabric showed the best dyeability under higher dyeing temperature. All fabrics had the higest K/S value at pH 3 regardless of the kind of fiber 3. Dyeing colors varied with the kind of mordants. Colors were turned into yellow in AIK(SO$_4$)$_2$.12$H_2O$ into Yellow-red in CuSO$_4$,.5$H_2O$ , and into green-Yellow in FeSO$_4$.7$H_2O$. As mordants, AIK(SO$_4$)$_2$.12$H_2O$, CuSO$_4$,. 5$H_2O$. FeSO$_4$.7$H_2O$. gallic acid and tartaric acid were used and especially AIK(SO$_4$)$_2$.12$H_2O$ showed the best dyeability and colorfastness in repeated dyeing. Mordants such as AIK(SO$_4$)$_2$.12$H_2O$ made fabrics have better chroma and washing-fastness though the light-fastness was poorer than non mordanting. 4. Repeated dyeing brought us deep color. When fresh dyebath was used each time, the dyeability was increased as the experiment was repeated more. When dyed with used dyebath several times, improved dyeability could not be expected. The optimal using times of the used dyebath was twice.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.393-400
• /
• 2010

This study examines the mordanting effect and multi functional properties of silk fabrics dyed with onion shell extracts that were mordanted with gallnut. The contents of this study are as follows. First, the optimum dyeing conditions were investigated by measuring the K/S value that depended the on dyeing conditions when silk fabrics were dyed with onion shell extracts. Second, the color, brightness, and chroma differences that appear after mordanting with gallnut were investigated by measuring the K/S and Munsell value. Third, the color fastness and antimicrobial activity were measured. When silk fabrics were dyed with onion shell extracts, the optimum dyeing conditions were a dyeing temperature of $70^{\circ}C$, a dyeing concentration of 160%, and a dyeing of time 30min. After mordanting with gallnut extracts, the K/S value increased remarkably and was larger in pre-mordanting than post-mordanting. The H value displayed yellow-red in all cases of pre and post mordanting. However, the H value was more reddish in the order of non-mordanting

• 기술사
• /
• 제17권4호
• /
• pp.28-39
• /
• 1984

Experiments were carried out for the development of a processing method of soybean into full-fat or defatted flour, using two varieties of soybean (kwangkyo produced in Korea and Bragg produced in India) Samples were subjected to dry dehulling, size reduction and wet heat treatment processes to make soybean flours. The quality of soybean flours were evaluated, and the results obtained were summarized as follows. 1. Crude fiber content of dehulled soybean was under 3.0% which indicated satisfactory dehulling, and there was no significant difference in crude fibre content between two varieties. 2. When dehulled soybean was cracked into soy grits by a hammer mill, 98.71∼98.86％ of the soy grit was in the range of 10∼18 mesh which was the optimum size of particle for quick and uniform penetration of heat into the intra-particle air spaces. 3. Moisture content of soy flour after steam treatment at 15 psig for 5 to 30 min was only 0.29∼1.68% which did not hinder the next milling operation. 4. From the color analysis of soy flours, it was observed that the dominant wavelength for all the samples are in a very narrow range from 575 to 581 nm and the color variation was from yellow to yellowish orange. Twenty to twenty five ％ higher reflectance was observed in the defatted flours than full fat flours. The ％ chroma of the defatted flour slightly increased as the duration of steaming of soy grits increased, whereas that of the full-fat flour did not. 5. The protein extractability in the defatted flour at pH 7.6 showed progressive decrease in solubility from 48.40％ (Bragg), 75.20％ (kwangkyo) for untreated flours to 9.75％ (Bragg), 26.27％ (kwangkyo) for 30 min steaming. But Kwangkyo variety showed twice higher protein extractability than Bragg variety.

• 패션비즈니스
• /
• 제20권1호
• /
• pp.98-114
• /
• 2016

This research study was performed to compare between Korean traditional color and digital transfer textile printing. This would help to find the new direction to apply Korean traditional colors to modern textile industry. The objective of this study is to digitalize Korean traditional colors to be applied to modern textiles, based on research studies by previous researchers, on the actualization of Korean traditional colors for textiles. The study focused on 21 red colors among others. Digital color palette of graphic program was printed on 6 different polyester textiles by using digital transfer textile printing. Different things to be supplemented were found by comparing the results with the colors of Korean traditional standard color names. After measuring the colors, Munsell color system and CIE $L^*a^*b^*$ value were measured then comparative study was performed on the measured values using 3D graphs. Measured colors of Munsell varied by color but in overall, chroma became low while brightness became high. Color characteristic of warm colors got weakened by turning into cold colors as brightness got high but yellow and red got low due to the characteristics of CIE $L^*a^*b^*$ value. This study has limitations with color analysis of digital transfer textile printing due to standardization of textiles and standardization of traditional colors however it can support to actualize the colors for the design using traditional color names by visualizing the color change of digital transfer textile printing in the future.

• 한국의상디자인학회지
• /
• 제6권3호
• /
• pp.55-66
• /
• 2004

The objectives of this study were to examine how image evaluation and preference of women's clothing color vary according to perceiver's culture, gender, and clothing color; to investigate the differences of image evaluation according to body type and the clothing color; and to disclose what image affects to the clothing color preference of Korean and American. Subjects were 388 Korean and 363 American college men and women. The American evaluated the wearer more elegant, feminine, and neater than the Korean did. Clothing color gave significant influence on perception of all image variables. Koreans showed that red and blue color shirts were perceived to be individualistic. Koreans considered blue, indigo, purple, gray, and black were perceived to be less feminine. This means that they evaluated the colors of blue range and low chroma were masculine according to their traditional attitude. Women were more attracted by indigo and purple, while men tended to evaluate yellow as an appealing color. The evaluation of sociability varied depending on the perceiver's culture and clothing colors. The corpulent body type had negative evaluation rather than the ordinary one without the relation with the color of clothing for Koreans and Americans. The evaluation of sociability of Americans had an interaction effect by the body type and clothing color. Attractiveness gave the first significant influences on clothing color preference, and the next came individual(-) and splendid image for Korean men. The individual image gave Korean men to be negative effect. Attractiveness, elegance, and sociable image gave significant influences on clothing color preference in Korean women. For American men, elegance gave the first significant influences on clothing color preference, and the next came sociability and neatness, while elegance was the first and the next came sociability and attractiveness for American women.

• 복식문화연구
• /
• 제16권3호
• /
• pp.518-532
• /
• 2008

The purposes of this study were to investigate the relationships between women's self-image and the preference and the wearing frequency of knit-wears, and to examine the characteristics of the design elements that influence the preferred knit-wear images. The subjects were 277 female college students and working women living in metropolitan area of Seoul. The data were analyzed by using descriptive analysis, factor analysis, Cronbach's $\alpha$-reliability coefficient, Pearson's correlation coefficient, and multiple regression analysis. Four dimensions of women's self-images were derived by factor analysis; elegance, conservativeness, individuality, and maturity. Women with conservative self-image preferred simple knit-wears and women with high rate for individuality preferred splendid and sporty knit-wears. Women with elegant self-image disliked sporty knit-wears. Women with conservative self-image preferred white, and those who rated their self-image to be individuality preferred various colors including yellow, blue, green, purple, pink, and sky-blue. Women with mature self-image preferred black and beige. Women with individuality as their self-image preferred jacquard pattern and abstract pattern. There was a higher wearing frequency for all four seasons for women with conservative self-image, and there was higher wearing frequency in the winter for those with elegant self-images. Women who preferred simple knit-wears showed preference for single color with no prints and low chroma color, and those who preferred sporty knit-wears showed preference for elastic materials. Women who preferred neat and elegant knit-wears showed preference for argyle check pattern.

• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.