• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.120.4-120
• /
• 2001

In this paper, a method of generating trajectories in real time for a mobile robot in a dynamic environment is proposed. Specifically, this method is focused on soccer-playing robots that need to calculate trajectories in real time, which are constantly subject to rapidly change as targets and obstacles move. The robots also should move at the fastest available speed, while tracking the generated trajectories. The method proposed in this paper solves the geometric problem of finding a smooth curve that joins two endpoints. To have this solved, we assign five constraints to each endpoint, which are the usual x, y, theta, and curvature as well as the influence of the initial robot velocity on the path. With these five constraints, the path generated can always be physically followed by robot. Through this method, the travel time of the robot over the entire path can b optimized. Therefore it can ...

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.754-758
• /
• 1996

This paper presents a new approach to the design of self-tuning adaptive control system that is robust to the changing dynamic configuration as well as to the load variation factors using Digital signal processors for robot manipulators. TMS320C50 is used in implementing real-time adaptive control algorithms to provide advanced performance for robot manipulator, In this paper, an adaptive control scheme is proposed in order to design the pole-placement self-tuning controller which can reject the offset due to any load disturbance without a detailed description of robot dynamics. Parameters of discrete-time difference model are estimated by the recursive least-square identification algorithm, and controller parameters we determined by the pole-placement method. Performance of self-tuning adaptive controller is illusrated by the simulation and experiment for a SCARA robot.

• The Journal of Korea Robotics Society
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2017

This paper proposes combination of a cognitive agent architecture named Soar (State, operator, and result) and ROS (Robot Operating System), which can be a basic framework for a robot agent to interact and cope with its environment more intelligently and appropriately. The proposed Soar-ROS human-robot interaction (HRI) agent understands a set of human's commands by voice recognition and chooses to properly react to the command according to the symbol detected by image recognition, implemented on a humanoid robot. The robotic agent is allowed to refuse to follow an inappropriate command like "go" after it has seen the symbol 'X' which represents that an abnormal or immoral situation has occurred. This simple but meaningful HRI task is successfully experimented on the proposed Soar-ROS platform with a small humanoid robot, which implies that extending the present hybrid platform to artificial moral agent is possible.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.345-352
• /
• 2017

In this paper, we design and implement an educational robot system that can use scratch education with the function of user demanding to perform robot education in actual school site in an embedded environment. It is developed to enable physical education for sensing information processing, software design and programming practice training that is the basis of robotic system. The development environment of the system is Arduino Uno based product using Atmega 328 core, debugging environment based on Arduino Sketch, firmware development language using C language, OS using Windows, Linux, Mac OS X. The system operation process receives the control command of the server using the Bluetooth communication, and drives various sensors of the educational robot. The curriculum includes Scratch program and Bluetooth communication, which enables real-time scratch training. It also provides smartphone apps and is designed to enable education like C and Python through expansion. Teachers at the school site used the developed products and presented performance processing results satisfying the missionary needs of the missionaries.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.51 no.2
• /
• pp.29-35
• /
• 2014

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.353-359
• /
• 2017

This paper describes the design and manufacture of a ankle two-axis force sensor of a walking assist robot for hemiplegic leg patient. The walking assist robot for the hemiplegic leg patient can safely control the robot by detecting whether the foot wearing the walking assist robot is in contact with the obstacle or not. To do so, a two-axis force sensor should be attached to the robot's ankle. The sensor is used to measure the force of a patient's ankle lower part. The two-axis force sensor is composed of a Fx force sensor, a Fy force sensor and a pulley, and they detect the x and y direction forces, respectively. The two-axis force sensor was designed using by FEM(Finite Element Method), and manufactured using by strain-gages. The characteristics experiment of the two-axis force sensor was carried out respectively. The test results indicated that the interference error of the two-axis force sensor was less than 1.2%, the repeatability error and the non-linearity of the two-axis force sensor was less than 0.04% respectively. Therefore, the fabricated two-axis force sensor can be used to measure the force of ankle lower part in the walking assist robot.

• Proceedings of the IEEK Conference
• /
• 2002.06d
• /
• pp.331-334
• /
• 2002

In this paper, we present two types of vision algorithm that mobile robot has CCD camera. for obstacle avoidance. This is simple algorithm that compare with grey level from input images. Also, The mobile robot depend on image processing and move command from PC host. we has been studied self controlled mobile robot system with CCD camera. This system consists of digital signal processor, step motor, RF module and CCD camera. we used wireless RF module for movable command transmitting between robot and host PC. This robot go straight until recognize obstacle from input image that preprocessed by edge detection, converting, thresholding. And it could avoid the obstacle when recognize obstacle by line histogram intensity. Host PC measurement wave from various line histogram each 20 Pixel. This histogram Is ( x , y ) value of pixel. For example, first line histogram intensity wave from ( 0, 0 ) to ( 0, 197 ) and last wave from ( 280, 0 ) to ( 280, 197 ). So we find uniform wave region and nonuniform wave region. The period of uniform wave is obstacle region. we guess that algorithm is very useful about moving robot for obstacle avoidance.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.330-333
• /
• 2020

장신구 산업은 인건비의 비중이 높고 노동자의 역량에 따라 제품의 제작 작업 시간 및 품질의 편차가 심하다. 이에 산업계의 수요에 맞추어 실리콘 금형 표면 지름 0.75mm 홀에 이어핀을 삽입하는 공정을 자동화하기 위하여 삽입 자동화 시스템이 개발되고 있다. 본 논문에서는 이어핀 삽입 자동화시스템에서 적용할 수 있는 템플릿 매칭 방법과 관심 영역 레이블링을 통한 홀 판별 방법을 제안한다. 제안한 방법의 안정성을 확보하기 위하여 실험을 통해 최적의 매칭 방법과 이진화 기법을 적용하였으며 이어핀 홀의 좌표를 확보하여 X-Y 정밀 이송 시스템에 적용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1797-1801
• /
• 2005

SLAM(Simultaneous localization and mapping) and AI(Artificial intelligence) have been active research areas in robotics for two decades. In particular, localization is one of the most important issues in mobile robot research. Until now expensive sensors like a laser sensor have been used for the mobile robot's localization. Currently, as the RFID reader devices like antennas and RFID tags become increasingly smaller and cheaper, the proliferation of RFID technology is advancing rapidly. So, in this paper, the smart floor using passive RFID tags is proposed and, passive RFID tags are mainly used to identify the mobile robot's location on the smart floor. We discuss a number of challenges related to this approach, such as RFID tag distribution (density and structure), typing and clustering. In the smart floor using RFID tags, because the reader just can senses whether a RFID tag is in its sensing area, the localization error occurs as much as the sensing area of the RFID reader. And, until now, there is no study to estimate the pose of mobile robot using RFID tags. So, in this paper, two algorithms are suggested to. We use the Markov localization algorithm to reduce the location(X,Y) error and the Kalman Filter algorithm to estimate the pose(q) of a mobile robot. We applied these algorithms in our experiment with our personal robot CMR-P3. And we show the possibility of our probability approach using the cheap sensors like odometers and RFID tags for the mobile robot's localization on the smart floor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.320-324
• /
• 2003

Recently, Virtual reality parts is applied in various fields of industry. In this paper we got under control motion of reality robot from interface manipulation in the virtual world. This paper created virtual robot using of 3D Graphic Tool. And we reappeared a similar image with reality robot put on texture the use of components of Direct 3D Graphic. Also a reality robot and a virtual robot is controlled by joystick. The developed robot consists of robot controller with vision system and host PC program. The robot and camera can move with 2 degree of freedom by independent remote controlling a user friendly designed joystick. An environment is recognized by the vision system and ultra sonic sensors. The visual mage and command data translated through 900MHz and 447MHz RF controller, respectively. If user send robot control command the use of simulator to control the reality robot, the transmitter/recever got under control until 500miter outdoor at the rate of 4800bps a second in Hlaf Duplex method via radio frequency module useing 447MHz frequency.