• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.301-308
• /
• 2006

The present work explores the effect of carbon-supported platinum catalyst on the HI decomposition using gas adsorption analyzer, thermogravimetry, X-ray diffractometry, scanning electron microscopy, and gas chromatography. For this purpose, three types of activated carbon (C), Pt/C-1 wt.%, and Pt/C-5 wt.% were prepared. The HI gas conversion is crucially influenced by the amount of Pt on the carbon support. The more the amount of Pt was, the higher results in the HI gas conversion. For three types of catalysts, HI conversion increased with increasing the decomposition temperature but with decreasing the space velocity. The increase of HI conversion with temperature was more pronounced in activated carbon than that in Pt/C. From EDX result, it was found that the activated carbon comprised higher amount of iodine than the Pt/C after the decomposition reaction. This implies that the HI conversion is closely related to the amount of Iodine.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.61-65
• /
• 1999

A new treatment of $LiV_3O_8$ has been proposed for improving its electrochemical behavior as a cathode material for secondary lithium batteries. Lithium trivanadate, $LiV_3O_8$, can be prepared in a finely dispersed form by dehydration of aqueous lithium trivanadate gels. The ultrasonic treatment method for Liv30s has been examined in comparison with $LiV_3O_8$ prepared by solutionmethod. The ultrasonically treated products in water were characterized by XRD (X-ray diffractometry), TGA (thermogravimetric analysis) and SEM (scanning electron microscopy). These measurements showed that the ultrasonic treatment process of aqueous $LiV_3O_8$ caused a decrease in crytallinity and considerable increased in specific surface area and interlayer spacing. The product, ultrasonically treated in water for 2 h, showed a high initial discharge capacity and was charge-discharge cycled without large capacity loss. The ultrasonic treated Liv30s can improve not only the specific capacity, but also the cycling behavior

• Korean Journal of Pharmacognosy
• /
• v.17 no.2
• /
• pp.153-160
• /
• 1986

We have isolated two new metabolites of territrem, designated as territrem $A'\;(TRA';\;C_{28}H_{30}O_{10})$ and $B'\;(TRB';\; C_{29}H_{34}O_{10})$ from chloroform extract of rice culture of Aspergillus terreus 23-1, using the same isolation procedure as that for territrem A, B and C(TRA, TRB, TRC). The present isolation procedure gave about 5 mg of TRA' and 10 mg of TRB' from 4 kg of rice culture per batch. Analysis of the high resolution mass spectrum showed that the molecular composition of TRA' and TRB' are $C_{28}H_{30}O_{10}$ and $C_{29}H_{34}O_{10}$ respectively, Some results of physicochemical properties were presented in this paper. Single crystal X-ray diffractometry of TRB' showed that the three dimensional structure of TRB' has not changed significantly from that of $TRB\;(C_{29}H_{34}O_9)$, except for the insertion of one oxygen atom into TRB to make additional pyran in the E-ring. It is also suggested that the aromatic moiety of TRA' is similar to that of $TRA\;(C_{28}H_{30}O_9)$ and the rest non-aromatic portions resemble to those of TRB'. The tremorgenic activity, lethality and inhibitory effect on acetylcholine esterase of TRA' and TRB' are greatly reduced comparing to that of TRA and TRB.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.862-868
• /
• 1996

Cadmium sulfide is commonly used as the window material for thin film solar cells, and can be prepared by several techniques such as sputtering, spray pyrolysis, close spaced sublimation (CSS), thermal evaporation, solution growth methods, etc. In this study, CdS films were deposited by thermal evaporation, close spaced sublimation, and solution growth methods, respectively, and the effects of the methods on physical properties of polycrystalline CdS deposited on ITO/glass were investigated. Also, the effects of variously prepared CdS thin films on the physical properties of CdTe deposited on the CdS were investigated. The thickness of polycrystalline CdS films was maintained at $0.3\mu\textrm{m}$ except for the solution grown CdS when $0.2\mu\textrm{m}$ thick CdS was deposited. After the deposition, all the samples were annealed at $400^{\circ}C$ or $500^{\circ}C$ in H2 atmosphere. To investigate physical properties of the deposited and annealed CdS thin films, UV-VIS spectro-photometry, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES), and cross sectional transmission electron microscopy(XTEM) were used to analyze grain size, crystal structure, preferred orientation, optical properties, etc. The annealed CdS showed the bandedge transition at 510nm and the optical transmittance high than 80% for all of the variously deposited films. XRD results showed that CdS thin films variously deposited and annealed had the same hexagonal structures, however, showed different preferred orientations. CSS grown CdS had [103] preferred orientation, thermally evaporated CdS had [002], and CdS grown by the solution growth had no preferred orientation. The largest grain size was obtained for the CSS grown CdS while the least grain size was obtained for the solution grown CdS. Some of the physical properties of CdTe deposited on the CdS thin film such as grain size at the junction and grain orientation were affected by the physical properties of CdS thin films.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.4
• /
• pp.197-204
• /
• 1987

Novel pranoprofen algininate and lysinate salts were manufactured and their salt formation was confirmed by melting point, infrared spectroscopy, nuclear magnetic resornance spectroscopy, differential scanning calorimetry and powder X-ray diffractometry. The physical properties of pranoprofen lysinate and argininate salts were compared with those of pranoprofen through in vitro and in vivo tests. Solubility, $pK_a$ and lipid-water partition coefficient were measured through in vitro experiments, while antiinflammatory efficacy, analgesic effect, acute toxicity and in situ absorption were tested through in vivo experiments. The results obtained were as follows: 1) The solubilities of pranoprofen argininate and lysinate salts were increased markedly in pH 6.8 and pH 7.5 phosphate buffer solutions, comparing with that of pranoprofen itself. 2) $pK_a$ values of pranoprofen, pranoprofen argininate and lysinate salts were 6.34, 7.99 and 7.56 in carbon tetrachloride, and 5.86, 6.69 and 7.92 in chloroform, respectively by liquid-liquid partition method. 3) The lipid-water partition coefficients of pranoprofen argininate and lysinate salts were increased more than that of pranoprofen in carbon tetrachloride, chloroform, or benzene-pH 6.8 buffer system, but were nearly identical using pH 1.2 buffer as water phase. 4) Antiinflammatory effects of pranoprofen argininate and lysinate salts were remarkably increased and analgesic effects of the salts were as same as that of pranoprofen. 5) Pranoprofen argininate and lysinate salts were safer than pranoprofen itself in acute toxicity, and the in situ absorption rates of pranoprofen, pranoprofen argininate and lysinate salts were 0.392, 0.960 and $0.762\;hr^{-1}$, respectively according to the rat intestine recirculation experiment.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.9-14
• /
• 2008

Cation exchange resin complex of amlodipine free base has been investigated to improve the stability and dissolution profile. The complex was prepared by reacting amlodipine solution with activated cation exchange resin, and amlodipine content in the complex was 31.6% calculated by HPLC determination. Its product was not physical mixture but the complex formed by ionic bond, which was identified by microscope system, differential scanning calorimetry and X-ray diffractometry. Each tablet containing amlodipine free base(I) and its complex(II) was prepared for the accelerated stability test ($40^{\circ}C$, 75%RH) and dissolution test in the pH 1.2 buffer solution and purified water media. Dissolution patterns of formulation II in both media were similar to those of $Norvasc^{(R)}$ tablet, but the pattern of formulation I in purified water was different. After 6 months storage under stability test, amlodipine content of formulation I, II and $Norvasc^{(R)}$ tablet were $99.3{\pm}1.2%,\;98.9{\pm}1.4%\;and\;83.9{\pm}3.4%$, respectively. While amlodipine free base was unstable at the condition, its complex was not only significantly stable, but also similar in the dissolution pattern. These results suggest the usefulness of complex as a stable carrier for amlodipine free base.

• The Korean Journal of Quaternary Research
• /
• v.3 no.1
• /
• pp.35-45
• /
• 1989

In Korean peninsula as well as in Western European Countries, we can find, reddish bands in sandy deposits of various origin. These bands (called "$B_t$ Band"), composed of fine material, are regularly intervalled and parallel to topography. This study is tring to elucidate their origin and associated milieux, with a group of methods and techniques (field survey, micromorphological analysis, granulometry, X-ray diffractometry of clay minerals...). $B_t$ Bands are not sedimentological origin. They were formed by superposition of two type accumulations in the sandy profile, triggered by different mechanisms: 1) accumulation in banded form, concerning silty heterometric material and micas, oweing to cryophoretic forces operating in course of deep freezing of sandy deposits: 2) illuviation of ferrugineous clays in the precedants bands, migrated in chelate state by soil water. The first processes are associated with very cold and humid climate in which freeze soil more than 3m in depth. The second, cold and humid climate in which podzolizattion is generalized. In case of South Korea and Western Europe, these two types of climates are not present circumstance, but Recent Quaternary (probably since the Wurm).the Wurm).

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.400-405
• /
• 2000

We investigated the effect of TMIn (trimethly-indium) source depletion on InGaAs, InGaAsP and 1.55 $\mu\textrm{m}$ InGaAs/InGaAsP SMQW by using EPISON ultrasonic monitor for measuring the concentration of metalorganic/carrier gas mixtures. And the problems for the growth reproducibility in MOCVD was solved by using an EPISON ultrasonic monitor with closed-loop mode under the condition of TMIn source depletion. The saturation pressure of TMIn was dramatically decreased over consumption of 80%. In the case of bulk epilayer, Up-shifting of 300 arcsec to Ga-rich direction and FWHM broadening by a factor of two in DCXRD spectrum were observed due to the TMIn source depletion. In the case of SMQW, Up-shifting of 300 arcsec to Ga-rich direction in DCXRD spectrum and blue-shift of 40 nm in PL spectrum were observed due to the TMIn source depletion. However, good reproducibility ($\Delta\theta$<$\pm$100 arcsec) was achieved even the condition of 95% of TMIn consumption, when we used the EPISON with closed-loop mode.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.169-174
• /
• 1996

Inclusion complexes of diclofenac sodium with ${\beta}-cyclodextrin$ were prepared in aqueous solution, alkaline solution and solid phase. The interaction of diclofenac sodium with ${\beta}-cyclodextrin$ in pH 9.0 alkaline solution was evaluated by the solubility method and the instrumental analysis such as thermal analysis, infrared spectroscopy, X-ray diffractometry. The solubility of diclofenac sodium was increased linearly with the increase in the concentration of ${\beta}-cyclodextrin$up to 0.15 mol and showed that the aqueous solubility rate of diclofenac sodium was significantly increased by complex with ${\beta}-cyclodextrin$. The optimum composition of this complex was one molecule of ${\beta}-cyclodextrin$ included 1.59 molecular weight of diclofenac sodium as a guest molecule. The pharmacokinetic parameters of the diclofenac sodium and the complex with ${\beta}-cyclodextrin$ were studied in rats by oral route. $T_{max}$ between drug alone and inclusion complex showed significant difference to be 120 minute and 20 minute respectively. Both of $C_{max}$ and AUC of inclusion complex was about 40% higher than drug alone. It is estimated from the data in this study that complexation of diclofenac sodium with ${\beta}-cyclodextrin$ increased the absorption rate and improved the bioavalability of the diclofenac sodium by the formation of a water-soluble complexes.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.6
• /
• pp.257-263
• /
• 2012

CrN/AlN multilayer coatings with various bilayer periods in the range of 1.8 to 7.4 nm were synthesized using a closed-field unbalanced magnetron sputtering method. Their crystalline structure, chemical compositions and mechanical properties have been investigated with Auger electron spectroscopy, X-ray diffractometry, atomic force microscopy, nanoindentation, scratch tests. The properties of the multilayer coatings varied strongly depending upon the magnitude of the bilayer period. The multilayer coating with a bilayer period of 1.8 nm showed the maximum hardness and an elastic modulus of approximately 37.6 and 417 GPa, respectively, which was 1.54 times higher than the hardness predicted by the rule of mixture from the CrN and AlN coatings. The hardness of the multilayer coating increased as the bilayer period decreased, i.e. as the rotation speed increased. The Hall-Petch type relationship, hardness being related to (1/periodicity)$^{-1/2}$, suggested by Lehoczky was confirmed for the CrN/AlN multilayer coatings with bilayer period close to the 5-10 nm range. With decreasing bilayer period, the surface morphology of the films became rougher and the critical load of films for adhesion strength gradually decreased.