• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1423-1430
• /
• 2016

The MAC protocols, which are classified into synchronous and asynchronous MAC protocol in the wireless sensor network, have actively studied. Especially, the asynchronous MAC protocol needs to research on the algorithm synchronizing between nodes, since each node independently operates in its own duty cycle. Typically, Receiver-Initiated MAC protocol is the algorithm synchronizing particular nodes by using beacon immediately transmitted by each node when it wakes up. However, the sender consumes unnecessary energy because it blankly waits until receiving the receiver's beacon, even if it does not know when the receiver's beacon is transmitted. In this paper, we propose the MAC protocol which can improve the performance by selecting an optimal node between a sender and a receiver to overcome the disadvantages. The simulation results show that the proposed algorithm improves energy efficiency and decreases average delay time than the conventional algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.147-152
• /
• 2016

Wireless sensor networks that are easy to deploy and install are ideal for building a system that monitors the condition of the equipment in a factory environment where wiring is difficult. The ZigBee has characteristics of low price and low power compared with other wireless communication protocols and is suitable for a monitoring system requiring a plurality of nodes. ZigBee communication requires encryption security between devices because all protocol layers are based on OTM trusted by each other. In the communication between nodes, node authentication must be guaranteed and exposure of confidential information managed by each node should be minimized. The facilities of the factory are regular and stationary in distribution location. In order to protect the information gathered from the sensor in the factory environment and the actuator control information connected to the sensor node, we propose a cryptosystem based on the two - dimensional grid - based key distribution method similar to the distribution environment of the facility.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.24-31
• /
• 2017

In wireless sensor networks, sensor nodes are deployed in a remote, harsh environment. When the power of the sensor node is consumed in such a network, the sensor nodes become useless together with the deterioration of the quality and performance of the sensor network which may save human life. Although many clustering protocols have been proposed to improve the energy consumption and extend the life of the sensor network, most of the previous studies have shown that the overhead of the cluster head is quite large. It is important to design a routing protocol that minimizes the energy consumption of each node and maximizes the network lifetime because of the power limitations of the sensor nodes and the overhead of the cluster heads. Therefore, in this paper, we propose an efficient clustering scheme that reduces the burden of cluster heads, minimizes energy consumption, and uses algorithms that maximize network lifetime. Simulation results show that the proposed clustering scheme improves the energy balance and prolongs the network life when compared with similar techniques.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.64-69
• /
• 2017

The abstract should summarize the contents of the paper and written below the author information. Use th In Wide-area Wireless Sensor Networks, network lifetime is short due to energy consumption due to transmission distance. To improve this, we divide the sensor field into layers and reduce transmission distance through multi-hop transmission. However, there is a problem in that the transmission rate drops because there is no Cluster Head in the layer, or the transmission distance increases due to the layer, and energy is wasted. There are DL-LEACH and EDL-LEACH as Protocols to improve this. DL-LEACH uses either single-hop transmission or multi-hop transmission depending on the situation. As a result, the transmission distance is optimized, thereby reducing energy consumption. In case of EDL-LEACH, it is proposed to improve the data rate in DL-LEACH. It is the same as DL-LEACH, but the Cluster Head is mandatory for all layers to improve the transmission rate. Although there is no Cluster Head for each layer, the transmission rate is improved, but the network life is shortened. In this paper, we try to improve the network lifetime while maintaining the EDL-LEACH transmission rate. The shortened network lifetime is due to Cluster Head overload near the base station. To improve this, the Cluster Head distribution method is improved and the network lifetime is improved.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.9
• /
• pp.385-392
• /
• 2015

In IoT(Internet of Things), it is important for wireless networks to communicate data created among resource-constrained wireless nodes, where time synchronization is needed for meaningful data creation and transmission. Time Synchronization by flooding is one of the mostly used protocols for WSN(Wireless Sensor Networks). Even though this type of scheme has some advantages over other types (i.e. a simple algorithm and independency of topology and so on), too many data transmission is required, leading to large power consumption. So, reducing transmission data is an important issue for energy efficiency in this kind of networks. In this paper, a new Flooding-based time synchronization protocol is proposed to use energy efficiently by reducing a transmitted traffic. The proposed scheme's performance has been evaluated and compared with an representative scheme, FTSP(Flooding Time Synchronization Protocol) by simulation. The results are shown that the proposed scheme is better than FTSP.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.504-514
• /
• 2009

Recently, fire monitoring application systems have been an active research area due to the safety of industries, historical monuments and so on. The fire monitoring application systems can reduce the damage of properties by providing earlier warning for possible fire situation. However, the existing systems have a drawback that they detect fire with delay due to their uniform epoch in fire detection algorithm. Moreover, they do not provide user-friendly graphical user interfaces in their fire monitoring systems. To resolve the problems, First, we propose a new fire detection algorithm (Early Fire Detection Fire Algorithm) which uses the distribution of sensing data for early fire detection. Our fire detection algorithm is better in terms of fire detection time than the existing work because it can set a start time of fire detection epoch dynamically based on data distribution. Second, we develop a fire monitoring application system which provides users with both a user-friendly graphical user interface and a fire alarm message when fire occurs. Finally, we show from our experiment that our developed system is effectively used for early fire warning in a variety of fire situations.

• Journal of Korean Society of societal Security
• /
• v.2 no.2
• /
• pp.49-54
• /
• 2009

High incident of accidents in construction jobsite became a social problem. According to the International Labour Organization (ILO), more than 60,000 fatal accidents occur each year in construction workplace worldwide. This number of accidents accounts for about 17 percent of all fatal workplace accidents. Especially, accidents from struck-by and falls comprise of over 60 percent of construction fatalities. This paper introduces a prototype of a received signal strength index (RSSI)-based safety monitoring to mitigate the potential accidents caused by falls and struck-by. Correlation between signal strength and noise index is examined to create the distance profile between a transmitter and a receiver. Throughout the distributed sensor nodes attached on potential hazardous objects, the proposed prototype envisions that construction workers with a tracker-tag can identify and monitor their current working environment in construction workplace, and early warning system can reduce the incidents of fatal accident in construction job site.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.433-440
• /
• 2010

Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3563-3570
• /
• 2010

MAC protocol has been studied for reducing energy consumption in wireless sensor networks. The overhearing and idle In the existing asynchronous MAC Protocol will occur due to unnecessary energy consumption. In this paper, to solve these problems, the Preamble to change the structure of the destination address, the Preamble of the end times, the data including the length of the Preamble and Data Overhearing reduce the length of the Check Interval Data generated according to the presence of the Dynamic Value dynamically adjustable by changing the DPL (Dynamic Preamble Length)-MAC protocol was proposed. Moreover, the existing asynchronous MAC protocol of wireless sensor networks and DPL-MAC protocol proposed in this paper to simulate the energy consumption and latency were assessed in terms of comparative analysis.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1234-1238
• /
• 2010

In recent, there have been done many studies on applications that monitor the information of mobile objects using Wireless Sensor Networks (WSN). A density query that finds out an area spread by density that a target object requires in the whole sensing field is a field of object monitoring applications. In this paper, we propose a novel homogeneous network-based in-network density query processing scheme that significantly reduces query processing costs and assures high accuracy. This scheme is based on the possibility-based expected region selection technique and the result compensation technique in order to enhance the accuracy of the density query and to minimize its energy consumption. To show the superiority of our proposed scheme, we compare it with the existing density query processing scheme. As a result, our proposed scheme reduces about 92% energy consumption for query processing, while its network lifetime increases compared to the existing scheme. In addition, the proposed scheme guarantees higher accuracy than the existing scheme in terms of the query result.