• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.15-26
• /
• 2013

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health-care, home automation, environmental monitoring, industrial control, vehicle telematics and agricultural monitoring. In all these applications, mobility in the sensor network with special attention to energy efficiency is a major issue to be addressed. Because of the energy inefficiency of networks-based mobility management protocols can be supported in IP-WSN. In this paper we propose a network based mobility supported IP-WSN protocol called Multicasting-based inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks (mSFP). Based on [8,20], We present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.252-258
• /
• 2013

As WSN is energy constraint so energy efficiency of nodes is important. Because avoiding long distance communication, clustering operating in rounds is an efficient algorithm for prolonging the lifetime of WSN and its performance depends on duration of a round. A short round time leads to frequent re-clustering while a long round time increases energy consume of cluster heads more. So existing clustering schemes determine proper round time, based on the parameters of initial WSN. But it is not appropriate to apply the round time according to initial value throughout the whole network time because WSN is very dynamic networks nodes can be added or vanished. In this paper we propose a new algorithm which calculates the round time relying on the alive node number to adapt the dynamic WSN. Simulation results validate the proposed algorithm has better performance in terms of energy consumption of nodes and loss rate of data.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.68-73
• /
• 2007

Recently, WSN(wireless sensor networks) consists of several sensor nodes in sensor field. And each sensors have the enforced energy constraint. Therefore, it is important to manage energy efficiently. In WSN application system, FEC(Forward error correction) increases the energy efficiency and data reliability of the data transmission. LDPC(Low density parity check) code is one of the FEC code. It needs more encoding operation than other FEC code by growing codeword length. But this code can approach the Shannon capacity limit and it is also can be used to increase the data reliability and decrease the transmission energy. In this paper, the author adopt Linear-Congruence method at generating parity check matrix of LDPC(Low density parity check) codes to reduce the complexity of encoding process and to enhance the energy efficiency in the WSN. As a result, the proposed algorithm can increase the encoding energy efficiency and the data reliability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.258-268
• /
• 2012

Wireless Sensor Network(WSN) is constituted by low-cost and low-energy, So the most important issue is that the task of the sensor performs successfully by using less energy. In previous WSN, determination of the header and gathering sensor data solution by header give great affection to the performance of network. In this paper, we propose a Hybrid transmission method which considers the direction of data collections. In the proposed hybrid routing method, all of the sensors determine that transmission the data to the sink node directly or indirectly using the head node depend on the location of the head node in the cluster. The performance is compared with the LEACH(Low Energy Adaptive Clustering Hierarchy) by experimental analysis. The results show that the preposed method can reduce the communication distance and energy consumption by avoiding the detour direction of transmission of the data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.10
• /
• pp.801-807
• /
• 2013

WSN consists of hundreds to thousands of sensor nodes. In order to solve the problem of energy consumption imbalance cluster head is reelected in every round, while node authentication scheme is utilized for secure communication. However, re-clustering increases the overhead of sensor nodes and during the node authentication phase the frequent AREQ/AREP message exchange also increases the overhead. Therefore, a secure and energy efficient protocol, by which overhead of sensor nodes is reduced and long time communication is achieved, is required for wireless sensor network. In this paper, an energy efficient and reliable IDE-LEACH protocol for WSN is proposed. The proposed protocol is prolongs networks lifetime about average 20% compared to the LEACH-based protocols and all attending nodes in communication form BS authentication consisted of trusted nodes.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.747-754
• /
• 2023

Energy-efficient routing protocol is an important task in a wireless sensor network that is used for monitoring and control by wirelessly collecting information obtained from sensor nodes deployed in various environments. Various routing techniques have been studied for this, but it is also necessary to consider WSN environments with specific situations and conditions. In particular, due to topographical characteristics or specific obstacles, a hole where sensor nodes are not deployed may exist in most WSN environments, which may result in inefficient routing or routing failures. In this case, the geographical routing-based hall bypass routing method using GPS functions will form the most efficient path, but sensors with GPS functions have the disadvantage of being expensive and consuming energy. Therefore, we would like to find the boundary node of the hole in a WSN environment with holes through minimal sensor function and propose hole bypass routing through boundary line formation.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.137-147
• /
• 2013

The RFID(Radio Frequency Identification) and the WSN(Wireless Sensor Network) have technical similarities and mutual effects, they have been recognized to be studied separately, and sufficient studies have not been conducted on the technical integration of the RFID and the WSN. Therefore, EPC global which realized the issue proposed the EPC(Electronic Produce Code) Sensor Network to efficiently integrate and interoperate the RFID and WSN technologies based on the international standard EPC global network. The proposed EPC Sensor Network technology uses the Complex Event Processing method in the middleware to integrate data occurring through the RFID and the WSN in a single environment and to interoperate the events based on the EPC global network. However, as the EPC Sensor Network technology continuously performs its operation even in the case that the minimum conditions are not to be met to find complex events in the middleware, its operation cost rises. Therefore, to address the problems of the existing system, we defined the minimum conditions of the complex events to detect unnecessary complex events in the middleware, and proposed an algorithm that can extract complex events only when the minimum conditions are to be met. To examine the minimum conditions, a index and a query index are used to extract complex events. To evaluate the performance of the proposed methods, In the case of the method of extracting complex events based on a bitmap index, we used the existing extraction method and NS2 simulation to evaluate its performance and thus to show its good performance in terms of the number of operation and the processing time for the complex events.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.209-214
• /
• 2012

Time synchronization is important role in a network, especially in Wireless Sensor Network (WSN) which is required for time-critical applications such as surveillance, tracking, data fusion and scheduling. Time synchronization in WSN should meet the other different requirements than the one in other networks because WSN has critical resource constraints, especially power consumption. This paper presents a new time synchronization scheme for WSN, which is energy efficient by reducing communication overhead. Simulation test shows this new scheme has better energy efficiency and performance of accuracy than existing schemes proposed previously.

• Journal of Korea Multimedia Society
• /
• v.10 no.12
• /
• pp.1671-1678
• /
• 2007

In these days, Disaster Management Systems have still put emphasis on its recovery more than the prevention of disaster events. However, the countermeasure of restoration has limitations to prevent the caused loss because the disasters often happen and are massive. Therefore, we propose a disaster prevention system for supporting the safe urban. In this paper, we try to construct a real-time monitoring system to prevent disaster events using new technologies such as Wireless Sensor Networks (WSN) and Geographic Information System (GIS). As a prototype to simulate the fire disasters on real-time, we construct gas sensors and temperature sensors. Our system consists of a WSN system to collect data of the gas and temperature sensors and to monitor the situation information. Our contribution is to provide a prototype application to prevent the disasters from the fire by constructing a WSN system with gas and temperature sensors.