• Journal of the Korean Burn Society
• /
• v.19 no.1
• /
• pp.12-15
• /
• 2016

Purpose: Firefighters are vulnerable to burn injury during firefighting. In extensive fires, conducted heat and radiant heat can cause burn injury even though firefighters are not directly exposed to fire. There has been increasing interest in the health problems of firefighters considerably since Hongje-dong fire of 2001, which claimed the lives of six fireman. However, there have been no studies done on the characteristics of firefighter burn injuries in South Korea. Therefore, we investigated the characteristics of firefighter burn injuries in a burn center. Methods: A retrospective, single-center research was performed between Jan 2006 to Dec 2015. 24 firefighters came to the burn center. The electronic medical records of patients were reviewed. Results: Flame burns (87.5%) were the major cause of burn in firefighter. All the patients suffered second-degree or third-degree burns. Mean burn size was 6.1±6.7%. 22 of 24 patients were hospitalized and 2 of 22 hospitalized patients admitted to intensive care unit. Mean length of hospitalization was 29.1±23.7 days and mean length of intensive care unit hospitalization was 6.0±1.4 days. The face was the site most commonly burned, representing 25.8% of injuries. The hand/wrist, upper extremity, and neck were the next largest groups, with 19.4, 12.9, 11.3% of the injuries, respectively. Conclusion: Firefighter burn injuries occur to predictable anatomic sites with common injury patterns. The burn size was small but, admitted patients need about 30 days of hospitalization.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.21-27
• /
• 2022

Flexible pressure sensor was developed using low-cost conductive graphite as printed electronics. Flexible pressure sensors are attracting attention as materials to be used in future industries such as medical, games, and AI. As a result of evaluating various electromechanical properties of the printed electrode for flexible pressure sensors, it showed a constant resistance change rate in a maximum tensile rate of 20%, 30° tension/bending, and a simple pulse test. A more appropriate matrix pattern was designed by simulating the electrodes for which this verification was completed. Utilizing the Serpentine pattern, we utilized a process that allows simultaneous fabrication and encapsulation of the matrix pattern. One side of the printed graphite electrode was O₂ plasma surface treated to increase adhesive strength, rotated 90 times, and two electrodes were made into one through a lamination process. As a result of pasting the matrix pattern prepared in this way to the wrist pulse position of the human body and proceeding with the actual measurement, a constant rate of resistance change was shown regardless of gender.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.

• Korean Journal of Acupuncture
• /
• v.21 no.4
• /
• pp.31-41
• /
• 2004

Background : The cun measurement system, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height. Conclusion : These findings suggest that the directional method is less likely dependable in locating acupoints than the proportional method because the influencing factors are different.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.259-278
• /
• 2002

This study divided straight success, pade success and failure with 7male golfers who have experiences more than 3 years, analyzed kinematic factors of golf swing to suggest scientifically. The conclusions were follows. 1) The wrist angle has significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 2) The body twist angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 3) The shoulder joint rotation angle has no significant difference in success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 4) The left hip joint vertical angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 5) The hip joint rotation angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 6) The trunk angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. 7 )The left knee joint angle has no significant difference in straight success, pade success and failure when swing of every pattern. There is no significant difference in pade success and failure. This study divided golf swing motion of pattern change in straight success, pade success and failure and analyzed the kinematic factors by 3-dimension cinematography to improve performance. In the future, many researchers have to study kinematic analysis to improve performance in every events.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.17-32
• /
• 2002

The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500 fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.

• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.505-517
• /
• 2005

The Purposes of this study were to find complementary connectible new factors that analyzed correlation relate of Sasang Constitution and GCM Body Type in Static Posture and Dynamic Hyper/Hypo-mobility Pattern. Method of this study was asymtomatic volunteers 232(unmarried man and women), conducted from September 1 to December 31. In this main study progressing step diagnosised first, Constitution of Sasang medicine after being classified into four groups of Soyangin, Taeumin, Soeumin, Taeyangin diagnosis of GCM Body Type and progressed that related Static Posture and Dynamic Hyper/Hypo mobility Pattern. The results are as follows. Distribution of Sasang Medicine Constitution proved to be Taeyangin 13, Soyangin 66, Taeumin 67, Soeumin 86 respectively. Distribution of GCM Body Type proved I Body Type 72(31.0%), II Body Type 54(23.3%), III Body Type 89(38.4%), IV Body Type 17(7.3%). The distribution of Sasang Constitution according to GCM Body Type was that; I Body Type was distributed in the order Soeumin 34.7%(25), Taeumin 31.9%(23), Soyangin 30.6%(22), Soeumin 34.7%(25) is the most people. II Body Type was distribution of in the order Soeumin 42.6%(23), Soyangin 5.9%(14), Taeumin 24.1%(13), Soeumin 42.6%(23) is the most people. III Body Type was distribution of in the order Soeumin 37.1%(33), Taeumin 30.3%(27), Soyangin 28.1%(25), Soeumin 37.1% is the most people. IV Body Type proved high distribution each of Soeumin 29.4%(5) and Soyangin 29.4%(5). In case of main left side posture character of spine and limbs about I Body Type 72 persons with left scapular and ilium forward tilted pattern proved in the order high distribution iliac crest thigh and scapular high 70(97.2%), gluteal fold high and scapular abduction 69(95.8%), lumbar scoliosis 65(90.3%). Also, in case of right side posture character proved in the order high distribution deep gluteal fold 69(95.8%), umbilical deviation 68(94.4%). Incase of main left side posture character of spine and limbs about n Body Type 54 persons proved in the: order high distribution knee hyperextension 50(92.6%), shoulder deviation 49(90.7%) etc. Also, in case of right side posture character proved in the order high distribution pelvic deviation 53(98.1%), iliac crest thigh 52(96.3%), hip flexion and ankle inversion 51(94.4%) etc. In case of main left side posture character of spine and limbs about III Body Type 89 persons proved in the order high distribution shoulder deviation 87(97.8%), scapular abduction 86(96.6%), scapular high 85(95.5%) etc. And in case of right side posture character proved in the order high distribution pelvic deviation and iliac crest thigh 86(96.6%) etc. In case of main left side posture character of spine and limbs about IV Body Type 17 persons proved in the order high distribution pelvic deviation, lumbar sciliosis and lumbar lordosis increase 15(88.2%) etc. Also, in case of right side posture character proved in the order high distribution wrist dorsiflexion 16(94.1%), thickened achilles tendon etc.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.154-163
• /
• 1995

With the development of anticancer chemotherapy and improved radiographic imaging studies, limb salvage operation became possible in the treatment of malignant and aggressive benign tumors. High grade sarcomas of the shoulder or the upper extremity can be surgically treated with a forequarter amputation, shoulder disarticulation or limb salvage surgery such as Tikhoff-Linberg procedure, segmental resection and replacement with endoprosthesis, segmental resection and replantation, or segmental resection and free vascularized bone graft. Among them the limb salvage surgery showed not only preservation of the remained upper extremity but also the excellent functional results. When comparing amputation and limb salvage operation while performing anticancer chemotherapy in both cases, 5 year survival rate, local recurrence, and distant metastasis did not show much difference. We studied 13 cases of limb salvage for the malignant and aggressive benign bone tumor of the upper extremity from March 1986 to December 1993 at Severance hospital. The summarized results were as follows. 1. There were 21 cases of malignant bone tumors and 5 cases of benign aggressive ones. 2. Of the 26 cases of malignant and benign aggressive bone tumors, limb salvage procedures such as Tikhoff-Linberg operation(8 cases), endoprosthetic replacement(2 cases), segmental resection and replantation(2 cases), and segmental resection and free vascularized fibular graft(l case) were done in 13 cases. 3. In 13 patient on whom the limb salvage procedure was performed, there were 3 osteosarcomas, 4 chondrosarcomas, 3 giant cell tumors, 1 Ewing's sarcoma, 1 leiomyosarcoma and 1 chondroblastoma. 4. In 13 patients, there was no local recurrence nor distant metastasis except one who had a segmental resection of the entire humerus part including glenoid and then postoperative anticancer chemotherapy for the treatment of the Ewing's sarcoma of the entire shaft of the humerus with pathological fracture. Local recurrence occurred 2 years and 6 months postoperatively in this Ewing's sarcoma patient, so forequarter amputation was performed and the irradiation and the anticancer chemontherapy were performed, but multiple bony metastasis developed and died of the disease 22 months after local recurrence. 5. The patients were followed-up for I year to 7 years and 5 months(average 4 years 5 months). 6. In 8 cases in which Tikhoff-Linberg procedure was performed, the function of the hand was almost normal. 7. Segmental resection and endoprosthetic replacement was performed in 2 cases, and the function of the remained upper extremity was good with no evidence of aseptic loosening or nerve palsy. 8. In 1 case of segmental resection and free vascularized fibular graft for the patient of the chon drosarcoma in the humerus, the function of the shoulder, elbow and hand was nearly normal. 9. In I case of leiomyosarcoma which involved both forearm muscles and bone near wrist joint, segmental resection and replantation was performed, and the patient has useful hand function.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• Clinical and Experimental Pediatrics
• /
• v.49 no.4
• /
• pp.424-430
• /
• 2006

Purpose : Juvenile rheumatoid arthritis(JRA) is one of the most common rheumatic diseases of childhood and is an important cause of short- and long-term disability. The purpose of this study was to determine the disease course and outcome in childhood patients with JRA. Methods : Fifty nine patients with JRA who were diagnosed and treated in the Department of Pediatrics, Asan Medical Center from August 1990 to November 2004 were enrolled in this study. Sex, age, type, affected joints, extra-articular manifestations, laboratory and radiologic findings, treatments, and outcomes of JRA patients were reviewed retrospectively. Results : Among JRA patients, 32.2 percent had pauciarticular type, 30.5 percent had polyarticular type and 37.3 percent had systemic type. The ratio of boys to girls was 1.7 : 1 and the mean age at onset was $9.3{\pm}3.7$(1.3-15.9) years. The most commonly affected joints were knee, ankle and wrist. The extra-articular manifestations observed were fever, rash, myalgia and lymph node enlargement, etc. The main laboratory findings observed were leukocytosis, anemia, thrombocytosis, elevated ESR, and elevated CRP. Rheumatoid factor and antinuclear antibody(ANA) were positive in 5.3 percent and 18.0 percent. Nonsteroid anti-inflammatory drugs(NSAID) were used most frequently and methotrexate with or without steroids was added in 27.1 percent of patients unresponsive to NSAID. 88.1 percent of patients were cured without functional disability and only one patient was in functional status IV. One patient, who had pulmonary involvement, died. Conclusion : Our results showed an even distribution in type of onset, male predominance, older age of onset, low incidence of iridocyclitis, and low positivity of ANA in JRA patients; this differs from occidental data. This study may suggest regional differences and variability in disease groups of JRA among different racies, but further multi-center trials and large scale epidemiological studies are needed to confirm our conclusion.