• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.176-183
• /
• 1996

A new iterative scheme is proposed for finite element analysis of wrinkling or tension structures. This enables us to update the stress state and the internal forces correctly taking into account the existence of wrinkling. The finite element implementation of the scheme is straightforward and simple, and only minor modifications of the existing total Lagrangian finite element codes for membranes are needed. The validity of the scheme is demonstrated via numerical examples for the torsion of a membrane and the quasi-static inflation of an automotive airbag, both made of isotropic or anisotropic elastic membranes

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.134-140
• /
• 2000

Tube hydroforming is a relatively new technology compared to conventional stamping. thus there is little knowledge base that can be utilized for process and die design. To remedy this situation considerable research is now being conducted by many researchers on significant aspects of tube hydroforming technology including material selection pre-form design hydroforking process and tool design. in the tube hydroforming process we frequently experence many failure modes like wrinkling. buckling folding back and fracture under the improper forming conditions. In this paper forming limit for failure occurrence such as fracture and wrinkling is examined theoretically and the result is compared with Back's experimental result.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.244-248
• /
• 2003

Recently social demands of fuel economy and environmental regulations require the development of light materials and new manufacturing technologies. In this point, the aluminum tube hydroforming process which is satisfied with good strength-to-weight ratio and recyclability is innovative concept. However the level of the aluminum tube hydroforming technology is low in comparison with that of steel tube hydroforming. In this paper, the hydroformability of aluminum tubes in different heat treatments is presented. Theoretical results for forming limits of the wrinkling and bursting are compared with experimental results of aluminum tubes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.310-313
• /
• 2007

This paper covers finite element simulations to evaluate the bending limit of double pipe for tube-hydroforming. The tube-hydroforming process starts with a straight precut tube. The tube is often prebent in a rotary draw bending machine to fit the hydroforming tool. During the bending the tube undergoes significant deformation. So forming defects such as wrinkling, thinning and flattening are generated in the tube. Consequently we analyzed the effect of process parameters in rotary draw bending process and searched the optimized combination of process parameters to minimize the forming defects using orthogonal arrays. The characteristic to evaluate the effects of the process parameters is the bending angle which wrinkling is generated, we define the bending angle at that time as bending limit. Of many process parameters, the process parameters of the bending process such as gab between inner and outer tube, boosting force, dimensions of mandrel were analyzed. And we observed the deformation modes of bent double pipe at specific bending angle in each parameter combination.

• 한국항공우주학회지
• /
• 제39권11호
• /
• pp.1005-1012
• /
• 2011

본 연구에서는 기하학적 비선형 후좌굴해석 및 전역-국지해석을 통하여 얇은 막재에서 주름이 파괴거동에 미치는 영향을 연구하였다. 해석에서 양단노치 및 일단노치를 가지는 사각형 인장시험 시편형상을 고려하였으며 주름이 발생한 경우와 억제된 경우에 대해 각각 해석을 수행하여 그 결과를 비교하였다. 해석결과의 분석을 통하여 주름의 발달에 따라 J-적분값의 변화에 미치는 영향을 조사하였고, 컷 길이에 따른 영향 및 시편형상의 길이 효과에 대해 체계적으로 연구하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.616-620
• /
• 2001

The wrinkling in the flange and wall of a part is a predominent failure mode in stamping of sheet metal parts. In many cases this wrinkling may be eliminated by appropriate control of the blank holding force(BHF), but BHF affects the draw depth. Although the wrinkles of flange have been made in the incipient stage of drawing, if the height of wrinkles is maintained under a prescribed limit by decrease or extinction of wrinkles in the course of drawing, small BHP can be allowed so that the depth of drawing could be increased. Authors research the variation of the wrinkles in flange in the course of square cup drawing by using aluminium A1015 and aluminium alloy A5052.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.235-250
• /
• 2007

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between rollers was presented. The theory and calculating equation were presented, and lab experiment was executed. We called the stiffness measured by Taber tester as 'Taber stiffness', and by tension wrinkling measurement as 'wrinkle stiffness', respectively, for comparison. Lab experimental results showed Taber and wrinkle stiffness are almost equivalent. We expect this method will work porperly for the on-line measurement of paper stiffness in near future.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 2001

Welded blank hydroforming technology is applied to an automotive subframe which has been manufactured by stamping and welding processes. Blank shape and die system is suggested on the basis of finite element analyses. Various defects, especially wrinkling problems in the area of sudden section change, are investigated, analyzed and tried out. The blank shape and the die system are modified to get the sound welded blank hydroformed subframe.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.21-26
• /
• 2006

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between rollers was developed. The theory and calculating equation were presented, and the theoretical maximum error associated with the equation was also presented. We called the stiffness measured by Taber tester as 'Taber stiffness', and by wrinkling behavior as 'wrinkle stiffness', respectively, for comparison. By using this method, on-line complete control of paper stiffness will be possible in near future. Special care about shear wrinkle and paper dimensional effects were addressed.

• 한국항공우주학회지
• /
• 제33권11호
• /
• pp.15-23
• /
• 2005

본 논문에서는 멤브레인 요소를 사용하여 주름이 있는 멤브레인의 정적 및 동적거동을 연구하였다. 해석은 상용유한요소 프로그램인 ABAQUS를 사용하였으며 멤브레인 요소에서 주름은 벌칙매개변수에 의한 물성치 수정 방법을 사용자 부프로그램으로 구현하여 고려하였다. 해석과정은 먼저 이론해가 멤브레인 문제에 적용하여 타당성을 검증하였고, 모서리에서 하중이 가해진 사각형 멤브레인에 대한 해석을 수행하여 주름이 정적 및 동적거동에 미치는 영향을 조사하였다.