• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• Journal of Ginseng Research
• /
• v.34 no.3
• /
• pp.227-236
• /
• 2010

The objective of this study was to evaluate the potential use of ginseng leaf as a cosmetic material. In this research, we employed enzymatic treated ginseng leaf by using Ultraflo L to improve the recovery of ginsenosides from the ginseng leaf and studied the biological activities and skin safety of the enzymatic treated ginseng leaf for use as a cosmetic material. The total ginsenoside contents of the non-enzymatic treated ginseng leaf (NEGL) and Ultraflo L treated ginseng leaf (UTGL) were 271 and 406 mg/g, respectively. The level of metabolite ginsenosides (sum of Rg2, Rg3, Rg5, Rk1, compound K, Rh1, Rh2, and F2) was higher in UTGL (93.1 mg) compared to NEGL (62.4 mg) in one gram ginseng leaf extract. The increase in amounts of ginsenoside types in UTGL compared to NEGL was generally 140% to 157%. UTGL exhibited relatively higher 2,2-diphenyl-2-picrylhydrazyl hydrate ($IC_{50}$, 2.8 mg/mL) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt ($IC_{50}$, 1.6 mg/mL) radical scavenging activities compared to NEGL (4.8 mg/mL and 2.2 mg/mL). The UTGL group showed normalized hydrogen peroxide, lipid peroxidation and visual wrinkling grade induced-UVB exposure. The UTGL did not induce any adverse reactions such as erythema and edema on intact skin sites; however, some guinea pigs treated with UTGL on abraded skin sites showed very slight erythema. The primary irritation index (PII) score of UTGL was 0.05 and it was classified as a practically non-irritating material (PII, 0 to 0.5). In skin sensitization tests with guinea pigs, UTGL had a positive rate of skin sensitization at 40%, and the mean evaluation score was 0.4.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.1-4
• /
• 2013

We proposed a new process to fabricate a high-aspect-ratio microhair having surface wrinkles using the contact-and-tension of a microstamp. Through this work, we observed that regular surface wrinkles were generated on the hair with a diameter of around $20{\mu}m$ due to the uni-directional compressive stress during the photocuring process by ultraviolet light. To do this, we conducted an experimental system setup for contact-and-tension process. From the preliminary test results, we believed that the proposed method can be applied to make a long polymer hair having surface wrinkles for special applications to biomimetics, and some research fields related on surface area such as heat transfer and catalyst enhancement.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2007.11a
• /
• pp.153-158
• /
• 2007

Background: Naturally occurring antioxidants were used to regulate the skin damage caused by ultraviolet (UV) radiation because several antioxidants have demonstrated that they can inhibit wrinkle formation through prevention of matrix metalloproteinases (MMPs) and/or increase of collagen synthesis. We examined the effect of oral administration of the antioxidant mixture ("L-Skin Care") on UVB-induced wrinkle formation. In addition, we investigated the possible molecular mechanisms of photoprotection against UVB through inhibition of collagen-degrading MMP activity or through enhancing of pro collagen synthesis in mouse dorsal skin. Methods: Female SKH-l hairless mice were orally administrated "L-Skin Care" (test group) or vehicle (control group) for 10 weeks with UVB irradiation by three times a week. The intensity of irradiation was gradually increased from 30 to $180mJ/cm^2$. Microtopographic and histological assessments of the dorsal skins were carried out at the end of 10 weeks to evaluate wrinkle formation. Western blot analysis and EMSA were also carried out to investigate the changes in the balance of collagen synthesis and collagen degradation. Results: Our "L-Skin Care" significantly reduced UVB-induced wrinkle formation, accompanied by significant reduction of epidermal thickness, and UVB-induced hyperplasia, acanthosis and hyperkeratosis. Oral administration of "L-Skin Care" significantly prevented UVB-induced expressions of MMPs, mitogen-activated protein (MAP) kinases and activation of activator protein (AP)-1 transcriptional factor in addition to enhanced type I procollagen and transforming growth factor-$\beta$ (TGF-$\beta$) expression. Conclusion: Oral administration of "L-Skin Care" significantly inhibited wrinkle formation caused by chronic UVB irradiation through significant inhibition of UVB-induced MMP activity accompanied with enhancement of collagen synthesis.

• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.203-210
• /
• 2011

To evaluate the ability of Bamboo (Phyllostachys nigra var. henenis Strapf) leaf extract (BL) to protect the skin from photodamage, the gross and microscopic changes in the skin of hairless mice and BL-treated mice exposed chronically to ultraviolet (UV) were examined. The skin of the UV-irradiated mice showed characteristic signs of photoaging, such as deep wrinkles across the back, increased epidermal thickeness, numerous cell infiltration, and many enlarged keratinizing cysts. BL-treated mice showed a significantly decreased wrinkling score and lack of proliferation of cysts. By the 22nd week, 88.9% (i.p. with saline) or 60.0% (topical administration with cream base) of the UV-irradiated mice developed at least one tumor. BL delayed tumor onset significantly. BL (i.p.) was also effective in reducing the occurrence of UV radiation-induced skin tumors and reduced the number of tumors per mouse. After 22 weeks of treatment, 37.5% (i.p.) of the mice treated with BL were tumor-free. Tumor multiplicity was reduced by 81.2% (i.p.) in the BL treated groups. It is noted that skin that is chronically exposed to UV is subject to photoaging and photocarcinogenesis and regular use of BL would prevent these photodamaging effects of UV.

• Journal of Ginseng Research
• /
• v.43 no.2
• /
• pp.226-235
• /
• 2019

Background: Panax ginseng is regarded as one of the best compounds for promoting health, and it has been used traditionally as a medicinal herb. Recently, Korean Red Ginseng (RG) has been shown to protect skin from aging and wrinkling; it can also relieve atopic dermatitis and allergy symptoms. This study aimed to evaluate RG's effects on the regeneration of the full-thickness skin wounds in rat. Methods: Full-thickness skin wounds were generated in rats, and then RG was administered either orally or topically. The wound-healing effects of RG were investigated by assessing wound size, mRNA expression patterns of genes related to wound healing, histological staining, and measurements of lipid, moisture, and elasticity in skin tissues. Results: The wound size was smaller, and tissue regeneration rate was faster in the RG-treated group than that in the control group on days 15 and 20 after initiating treatment. On postoperative day 20, skin lipid and moisture content had increased significantly in the RG-treated group. Significant increases in the gene expression levels of transforming growth $factor-{\beta}1$ and vascular endothelial growth factor were found in the RG group during the early stages of wound healing. Matrix metalloproteinase-1 and matrix metalloproteinase-9 showed significant increases in gene expression levels on day 20. Conclusion: The results suggested that RG may promote healing of full-thickness skin wounds in rats. They also provided basic insights into the effects of RG on skin regeneration, supporting its use as a dressing material for wound treatment and its development as a functional food.

• Composites Research
• /
• v.34 no.2
• /
• pp.108-114
• /
• 2021

Graphene flakes are generally mass-produced by converting graphene oxide into reduced graphene oxide using chemical or thermal reduction. These graphene flakes can be stacked to form a free-standing graphene paper, which can be used for various applications. However, a graphene paper lacks stretchability, which hinders its application in stretchable devices. In this work, we introduced wrinkles in a graphene paper to make it stretchable. A graphene paper fabricated by vacuum-filtering a graphene dispersion was placed on a pre-stretched adhesive film. When the pre-stretched adhesive film returned to the original state, the graphene paper was wrinkled. The effect of the pre-stretching and wet condition of the graphene papers was experimentally investigated by using scanning electron microscopy. In addition, we observed the change of the period of the wrinkles in the graphene paper depending on the pre-stretching.

• The Korean Journal of Physiology and Pharmacology
• /
• v.25 no.1
• /
• pp.87-94
• /
• 2021

Skin photoaging occurs due to chronic exposure to solar ultraviolet radiation (UV), the main factor contributing to extrinsic skin aging. Clinical signs of photoaging include the formation of deep, coarse skin wrinkles and hyperpigmentation. Although melanogenesis and skin wrinkling occur in different skin cells and have different underlying mechanisms, their initiation involves intracellular calcium signaling via calcium ion channels. The ORAI1 channel initiates melanogenesis in melanocytes, and the TRPV1 channel initiates MMP-1 production in keratinocytes in response to UV stimulation. We aimed to develop a drug that may simultaneously inhibit ORAI1 and TRPV1 activity to help prevent photoaging. We synthesized nootkatol, a chemical derivative of valencene. TRPV1 and ORAI1 activities were measured using the whole-cell patch-clamp technique. Intracellular calcium concentration [Ca2+]i was measured using calcium-sensitive fluorescent dye (Fura-2 AM). UV-induced melanin formation and MMP-1 production were quantified in B16F10 melanoma cells and HaCaT cells, respectively. Our results indicate that nootkatol (90 μM) reduced TRPV1 current by 94% ± 2% at -60 mV and ORAI1 current by 97% ± 1% at -120 mV. Intracellular calcium signaling was significantly inhibited by nootkatol in response to ORAI1 activation in human primary melanocytes (51.6% ± 0.98% at 100 μM). Additionally, UV-induced melanin synthesis was reduced by 76.38% ± 5.90% in B16F10 melanoma cells, and UV-induced MMP-1 production was reduced by 59.33% ± 1.49% in HaCaT cells. In conclusion, nootkatol inhibits both TRPV1 and ORAI1 to prevent photoaging, and targeting ion channels may be a promising strategy for preventing photoaging.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.611-622
• /
• 2021

Composite material-due to low density-causes weight savings, which results in lower fuel consumption of transport vehicles. The aim of the research was to change the existing base-plate of the aluminum airplane container with the composite sandwich plate in order to reduce the weight of the containers of cargo aircrafts. The newly constructed sandwich plate consists of aluminum honeycomb core and composite face-sheets. The face-sheets consist of glass or carbon or hybrid fiber layers. The orientations of the fibers in the face-sheets were 0°, 90° and ±45°. Multi-objective optimization method was elaborated for the newly constructed sandwich plates. Based on the design aim, the importance of the objective functions (weight and cost of sandwich plates) was the same (50%). During the optimization nine design constraints were considered: stiffness, deflection, facing stress, core shear stress, skin stress, plate buckling, shear crimping, skin wrinkling, intracell buckling. The design variables were core thickness and number of layers of the face-sheets. During the optimization both the Weighted Normalized Method of the Excel Solver and the Genetic Algorithm Solver of Matlab software were applied. The mechanical properties of composite face-sheets were calculated by Laminator software according to the Classical Lamination Plate Theory and Tsai-Hill failure criteria. The main added-value of the study is that the multi-objective optimization method was elaborated for the newly constructed sandwich structures. It was confirmed that the optimal new composite sandwich construction-due to weight savings and lower fuel consumption of cargo aircrafts - is more advantageous than conventional all-aluminum container.

• Journal of Convergence for Information Technology
• /
• v.12 no.1
• /
• pp.172-179
• /
• 2022

Unlike other processes such as washing, the ironing process in the laundry process is difficult to standardize and thus relies on manual labor. Unlike upper garments, pants have pleats at the waist as well as a crease line below the waist, Therefore, two separate ironing devices have been developed and used. However, in this method, problems such as additional worker input, space loss, and wrinkling of pants occur due to manual movement between processes, Consequently, a pants ironing device that combines the two equipments is required. The all-in-one pants ironing system described in this paper automatically sequentially irons the upper part and side of the pants regardless of the length, shape, and upper pleats of the pants. It also performs a self-diagnosis function while displaying the ironing progress on the user's monitor. As a result of this study, it became possible to double the amount of ironing and reduce power consumption by more than 20% compared to the case of using two independent equipment.