• Journal of the Korean Society of Systems Engineering
• /
• v.18 no.2
• /
• pp.149-159
• /
• 2022

This study investigated the relationship between economic growth and energy security risk levels in Korea using linear and non-linear ARDL methods. While there are many studies on the relationship between energy consumption and economic growth, few studies focus on the relationship between energy security and economic growth considering 4A dimensions of energy security such as energy availability, accessibility, acceptability, and affordability. Energy risk index from Global Energy Institue and GDP data from world bank are used for ARDL and NARDL analysis. Our result of ARDL shows that there is no long-term relationship between energy security risk levels and economic growth. On the other hand, NARDL result shows that there is an asymmetric relationship between economic growth and energy security risk levels in the long run. The results show the importance of expending further research on ensuring energy security to policymakers.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.259-268
• /
• 2019

One of the most effective methods to consistently ensure the safety of a tap water supply can be achieved by application of a comprehensive risk assessment and risk management approach for drinking water supply systems. This approach can be termed water safety plans(WSP) which recommended by WHO(world health organization) and IWA(international water association). For the introduction of WSP into Korea, 150 hazards were identified all steps in drinking water supply from catchment to consumer and risk assessment tool based on frequency and consequence of hazards were developed. Then, developed risk assessment tool by this research was implemented at a water treatment plant($Q=25,000m^3/d$) to verify its applicability, and several amendments were recommended; classification of water source should be changed from groundwater to stream to strengthen water quality monitoring contaminants and frequencies; installation of aquarium to monitor intrusion of toxic substances into raw water; relocation or new installation on-line water quality analyzers for efficient water quality monitoring; change of chlorination chemical from solid phase($Ca(OCl)_2$) to liquid phase(NaOCl) to improve soundness of chlorination. It was also meaningful to propose hazards and risk assessment tool appropriate for Korea drinking water supply systems through this research which has been inconsistent among water treatment authorities.

• International Journal of Railway
• /
• v.2 no.1
• /
• pp.18-21
• /
• 2009

The basis of modem risk-based safety management is to focus on what might happen and ensure it is designed out of the system by robust hazard identification and risk analysis. However, in the real world things go wrong and it is essential to be prepared for the worst so that the response can minimise harm and loss of property and damage to the environment. Whilst some hazard mitigation measures are aimed at preventing incidents, others are venting escalation. The results of the tests concluded that the most effective means by the control room, both with and without, local station staff assistance using directive public address announcements and CCTV surveillance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1153-1160
• /
• 2016

There have been many studies on the subject of risks in the Construction Industry and many useful results have been produced. However, risk studies on the conditions of contract, which is the most critical contract documents, has not been tried despite of its contractual function in the overseas projects. In this study, various contractual risks are identified for proper and reasonable evaluation of the contractual risks possibly encountered in the Tender and/or Contract stages of the Projects. For development of study, FIDIC Red Book 1999 Edition which is world widely recognised as a standard conditions of contract prepared for the projects designed by the Employer. Contractual risks are divided into three levels and applicable clauses are assigned to each appropriate risk factors. And table of major contractual risk factors are made using the classified levels of each factors with evaluation criteria as a result of this study. As this study is made only for the conditions of contract which is prepared for the construction contracts designed by the Employer, further studies for other types of contracts such as Design-Build (FIDIC Yellow Book), EPC/Turnkey (FIDIC Silver Book) and recently developed Design, Build and Operate type of contract (FIDIC Gold Book) are required to cover various types of projects executed in the world construction markets.

• Journal of Korean Society of Transportation
• /
• v.14 no.2
• /
• pp.119-136
• /
• 1996

The evaluation of risk level or possibility of traffic accidents is a fundamental task in reducing the dangers associated with current transportation system. However, due to the lack of data and basic researches for identifying such factors, evaluations so far have been undertaken by only the experts who can use their judgements well in this regard. Here comes the motivation this thesis to evaluate such risk level more or less in an automatic manner. The purpose of this thesis is to test the fuzzy-logic theory in evaluating the risk level of traffic accidents. In modeling the process of expert's logical inference of risk level determination, only the geometric features have been considered for the simplicity of the modeling. They are the visibility of road surface, horizontal alignment, vertical grade, diverging point, and the location of pedestrain crossing. At the same time, among some inference methods, fuzzy composition inference method has been employed as a back-bone inference mechanism. In calibration, the proposed model used four sites' data. After that, using calibrated model, six sites' risk levels have been identified. The results of the six sites' outcomes were quite similar to those of real world other than some errors caused by the enforcement of the model's output. But it seems that this kind of errors can be overcome in the future if some other factors such as driver characteristics, traffic environment, and traffic control conditions have been considered. Futhermore, the application of site's specific time series data would produce better results.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.93-95
• /
• 2003

Vector-borne diseases have been the most important worldwide health problem for many years and still represent a constant and serious risk to a large part of the world’s population. GIS and RS is used to evaluate and model the relationships between environmental factors/indicators and the incidences of viral diseases. The aim of the study is to identify the risk factors in Dengue Haemorrhagic Fever DHF) from the highest prevalence area and lowest prevalence area in Sukhothai province, Thailand using statistical, spatial and GIS Modeling. Results obtained in the study of the Dengue show that it is now possible to identify and localize precisely environmental indicators and factors of viral diseases.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.343-348
• /
• 2004

Since the destruction of World Trade Center the attention of the united States and the wider international community has focussed upon the need to strengthen security and prevent terrorism. This paper suggests an analysis prior to risk factor and structure for anti-terrorism in the korean maritime society. For this, in this paper, maritime terror risk factor was extracted by type and case of terror using brainstorming method. Also, risk factor is structured by FSM method and analyzed for ranking of each risk factor by AHP. At the result, the evaluation of risk factor is especially over maximum factor for related external impact.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.487-493
• /
• 2005

Since the destruction of World Trade Center the attention of the United States and the wider international community has focussed upon the need to strengthen security and prevent terrorism This paper suggests an analysis prior to risk factor and structure for anti-terrorism in the korean maritime society. For this, in this paper, maritime terror risk factor was extracted by type and case of terror using brainstorming method. Also, risk factor is structured by FSM method and analyzed for ranking of each risk factor by AHP. At the result, the evaluation of risk factor is especially over maximum factor for related external impact.

• Proceedings of KOSOMES biannual meeting
• /
• 2001.05a
• /
• pp.105-133
• /
• 2001

World trade has been increasing continuously in total volume, on the other hand, environmental protection on sea and conservation of fishery resources has been rising up the major issue. All of the world are pushing their efforts two major purposes to the full, one is taking competitive place in marine transportation throughout the world and another Is environment protection. Pusan Port as world leading Port put its all effort in bring more ocean going vessels and securing their traffic route by providing them more information related marine traffics through PTMS in port. During two years of operation, statistics of marine traffic accidents showed that many dynamic casualties such as collisions, groundings, and rammings has been decreased. However, due to increasing cargo volume, limited water area and unpredictable weather condition, potential risks still exist high. In this paper, in order to maximize the efficiency of PTMS and reduce various risks in the future, we examine risk factors over operational results and experience, and propose reasonable operational methods of PTMS.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.38-48
• /
• 2017

ISO 9001 Quality Management Systems-Requirements has been revised in 2015. It has been updated four times since its publication in 1987. It is the most widely used International Standard in the world. There are over one million companies and organizations in over 170 countries certified to ISO 9001 from an ISO survey. Organizations are supposed to be certified to this new version by late 2018. The key changes in ISO 9001:2015 are to establish a High Level Structure (HLS) and focus on Risk-Based Thinking (RBT). Risk-Based Thinking means the process approach to decide how risk is addressed in establishing the processes to improve process outputs and prevent undesirable results. It pursues process planning and controls based on risks so that organizations can improve the effectiveness of the quality management system. It maintains and manages a Quality Management System that inherently addresses risks and meets objectives. In this article we firstly attempt to explain how to understand the fundamental concept of Risk-Based Thinking which is a systematic approach to consider risks rather than treating prevention as a separate component of a Quality Management System. We comment on the detailed requirements that contain risks in ISO 9001:2015 clauses. We also summarize recent advances on the risk assessment and management in line with ISO 31000:2009 Risk Management-Principles and Guidelines. We finally propose the practical risk management procedures for implementing ISO 9001:2015 with an emphasis on RBT. This article would contribute to help quality managers and practitioners convert to ISO 9001:2015.