• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.306-314
• /
• 2018

In maritime environment, it is necessary to understand the characteristics of sunglint since it may degrade the target detection performance of the infrared sensor mounted weapons. In this paper, sunglint in LWIR band is modeled using the slope distribution of the sea surface, and is verified by comparing the radiance of a simulated result with that of the real world. According to the simulation, sunglint is critical when the solar zenith angle is over $60^{\circ}$. The peak radiance of sunglint grows as the solar zenith angle increases until it reaches $83^{\circ}$ and has a large difference depending on the solar zenith angle when the wind speed is small. Finally, seasonal and temporal characteristics of sunglint effects are analyzed. In summer, sunglint is dominant in the horizon near the solar azimuth right after sunrise and before sunset. However, in winter, the influence of sunglint lasts even during the daytime since the elevation of the sun is much lower than in summer.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.56-60
• /
• 2007

The usage of MSDS (Material Safety Data Sheet) is increased world widely for the implementation of GHS and REACH. In order to know the accuracy of the data in MSDS the flash point of n-Decanol was measured by using a Tag closed tester, a Seta-flash closed tester, a Pensky-Martens closed tester and a Cleveland open tester in Japan and Korea, respectively. The test results of flash points of n-Decanol purchased different manufacturer were compared to the data of the references and MSDS. The flash points determined in Japan were similar to those in Korea but have shown much difference from those in MSDS and literatures. It is suggested that the results of flash points determined in this research have validity and manufacturers should be more careful when they make MSDS as well as for the classification of GHS and REACH.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1034-1046
• /
• 2009

Based upon literature survey, this research aims to analyze western children's clothing and characteristics over centuries. It was not until the 18th century that children were given serious consideration and that fabrication of clothing began to be designed only for children. The very first clothes which revolutionized children's wear was 'a la matelot' in the 18th century which freed children from physical restriction, recognized gender difference, and sailor suit became popular among all sexes and adopted as school uniform. And then children's clothing was shortened in length and adopted tubular silhouette, which allowed greater comfort and movement. The 20th century saw children's wear reform to be carried out after the World War II due to invention of synthetic fiber, easy care dress material, mass production system and sophistication of marketing methods. Further evidence of improvement of children's social status can be found in contemporary designs: for example, 'casualized' wear, 'character design' which reflects children's psychology and 'family look' which is designed to be worn with mothers. This evolution of children's clothing within western dressing support the view that children's clothing is not a miniature of adult wear but it reflects idiosyncrasies of the era and exerts children's dignity.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.125-130
• /
• 2013

Although the electronic body protector has been officially adopted by the World Taekwondo Federation(WTF) in 2006, no scientific information is available about the reliability of its performance. The purpose of this study, therefore, was to investigate the relationship between the impact value of electronic body protector and the impact force of force platform. Male collegiate Taekwondo athletes([MCTA], n=21) and male collegiate Taekwondo students([MCTS], n=20) volunteered to participate in the study. Each subject performed the apchagi, dollyeochagi and dwichagi on the force platform and the electronic body protector. At the apchagi, it showed that MCTS(about 4,700 N) generated more maximum kick force than MCTA(about 3,900 N), but it expressed that MCTA(about 5,300 N) generated more maximum kicking force than MCTS(about 4,400 N) at the dwichagi. At the apchagi and the dwichagi, it indicated the high coefficient of correlation(over r=.8) which supports higher explanation force the relationship between the impact value of electronic body protector and the impact force of force platform, but there was no statistically significant difference at the dollyeochagi.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.4
• /
• pp.336-351
• /
• 2022

Background: Prader-Willi Syndrome (PWS) is a rare genetic disorder. To improve the health deterioration of PWS, investigating optimal treatment options for PWS is required. Thus, we aimed to evaluate the efficacy of pharmacotherapies compared with supportive care or placebos in patients with PWS. Methods: PubMed and EMBASE databases were used to search for randomized controlled trials (RCTs) evaluating the efficacy of pharmacotherapy in PWS patients. Only RCTs that evaluating the efficacy of pharmacotherapy in PWS patients were retrieved. Results: A total of 26 studies were included to evaluate body composition, hormones, glucose levels and hyperphagia behavioral status. Pharmacological treatment group showed a significant decrease of body fat (mean difference (MD): -6.32, 95% confidence interval (CI): -10.58 to -2.06, p=0.004), a significant increase of lean body mass (LBM) (MD: 1.86, 95% CI: 1.43 to 2.30, p<0.00001) and insulin-like growth factor 1 (IGF-1) levels (MD: 241.62, 95% CI: 68.59 to 414.64, p=0.006) compared with the control group. Nevertheless, based on other outcomes evaluated by the current systematic review, pharmacological options showed different efficacy in treating PWS. Conclusion: Pharmacological therapies were effective to decrease significantly in body fat and increase significantly on LBM and IGF-1 levels in patients with PWS. However, still, individualized therapies should be considered in real-world practice in PWS treatment.

• Journal of Integrative Natural Science
• /
• v.15 no.1
• /
• pp.37-48
• /
• 2022

Metabus, a three-dimensional virtual environment for digital communication, has gained a lot of attention recently. Even so, there are still many unanswered questions about the user's consciousness and behavior. A difference in nature from conventional digital communication is also unclear. This paper aims to study Metabus on a hypothetical premise by organizing the possibility of Metabus for communication activation based on a research project aimed at using Metabus to support the formation of a community of school dormitories and studio rental residents. After reviewing the establishment process and application cases of Metabus, we focus on the character (avatar) used as the user's alter ego within the metabus, which will allow customization of both form and content different from text-based communication. The "physicality" and the "spatiality" of the metaverse and the "immersion" they bring are among the most important, functional innovations. Based on this summary, a case of using metabuses will be reviewed to describe the research plan aimed at supporting community formation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2527-2538
• /
• 2011

The Reliability started for MILitary purposes during World War II in 1942, getting more important for maintenance, safety, etc in modern society. As technologies develop, also international standards for measuring the reliability is advancing. RAMS activities for maintenance, safety verification is material to national railroad. And for this, it needs quick response for the changes of standards. Even now standards are upgrading for developing electronic technologies. Therefore analysis of failure rate's trend about such standards is judged necessary. So We submit a this paper for comparative analysis of changing process standards according to development of electronic technologies and reliability. At first, we compared actual usage ratio of standards for understanding the current state of usage. Based of these state of usage, discuss the major standard. And then, introduced reliability standards's trend, calculation method of failure rate and difference of failure rate calculation standard according to march of time. In this paper, used standards are MIL-HDBK-217F, Telcodia, etc.

• Journal of the Korean Society of Costume
• /
• v.51 no.2
• /
• pp.135-148
• /
• 2001

The measuring rule Is to extimate a size of a physical solid and its standard was each part of body since the beginning of the world. Korean traditional measuring rule was "Kyul Boo Sok Pa Bob". It bases on wreth of farm land and means a handful and a bundle. It was the real Korean traditional measuring rule though it was a influence on Chinese rule. And in Koguryo it had an effect on Japanese′s. In Chosun dynasty the King Sejong imprived the measuring rule and regylations in such a way to meet the realistic needs of civil lives. He put in good order by a proportions of the musical scale. It was one of fille correct ways to preserve the measuring rule and based on "Kyul Beo Sok Pa Bob"too. So ill that time the measuring rule for Korean traditional costume′s length was 46.703cm. In king Soonjo it′s length was 49.254cm and in 1926 it changed 50cm by the metric system. In 1990s the standard length has a difference in regions, 30cm, 45cm, 50cm, 54.5cm, 55cm and 60cm. As a result of the actual object investigation by regional measuring rule for Korean traditional costume it can reduce an accidental error when use the standard measuring rule, 50cm.

• Fashion & Textile Research Journal
• /
• v.11 no.6
• /
• pp.918-924
• /
• 2009

As the population of overweight and obese children is rising rapidly around the world, there are many researches on purchasing and wearing children's clothing and optimal sizes, but researches on obese children are still inadequate. This study was carried out on 192 obese children over 75% in BMI. The purpose of the study was to set up the optimal interval of sizing system using the loss function which would be a guide for obese children for selecting ready to wear of suitable size. Introducing a loss function, which reflects how much the purchasing desire changes according to the difference, we formulate the problem and suggest a procedure to determine the optimal standard sizes minimizing the loss. These results were as follows ; In size chart of top's, 4 sizes had been determined by a loss function, had covered more than 91.1% of all subjects. In size chart of bottom's, 5 sizes had been determined by a loss function, had covered more than 87.0% of all subjects.

• Korean Institute of Interior Design Journal
• /
• v.17 no.1
• /
• pp.146-154
• /
• 2008

The study aims to find out the changing aspects of contemporary Korean libraries so called public in terms of their spatial characteristics. In so doing, it analysed 16 recently built libraries by using the spatial depth defined in the Space Syntax theory. As the result, it could be said that the libraries were planned and designed well reflecting the world wide trend as a public institution such as an open plan, easy access, new functional spaces, and so on. It could be also said, however, that there was no difference between the previous libraries and the recent ones when the actual usage is considered. It means that the architectural attempts have been made to plan an 'open, public library', especially in terms of the spatial configuration, whereas the way of management has not been changed at all for some reasons such as the lack of staffs, security and so on. Therefore, it can be seen that the depth, one of the most important factors in the recognition of the spatial configuration, is more deepened as a form of the liner structure in the spatial configuration.