• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.631-637
• /
• 2014

Recently, SNS is widely used for various purposes such as fast decision making or effective business process in educational institutions or enterprise as well as general services for social networking. Unfortunately, all of existing general SNS platforms do not provide user groups with workspaces for sharing information in a hierarchical way, nor support the functionality of workspace backup for migrations. In this paper, we present a collaborative workspace environment named ElggSpace which extends the Elgg SNS platform with the C3ware collaborative middleware. With the help of C3ware, ElggSpace systematically supports collaborative workspaces that enable user groups to share massive resource in cloud storages. In addition, ElggSpace allows high-level access controls for resources management and the functionality of resource backup, supporting effective collaboration.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.5
• /
• pp.23-30
• /
• 2021

In this paper, we propose an extended reality-based simultaneous multi presence system in a process of remote cooperative work. The proposed system generates a ring-shaped invisible screen which surrounds a user, and it provides position and manipulation of remote workspace and personal workspace. With the proposed system, the user easily navigates the several workspace for the remote collaboration or he/she selects a specific space for immersion. The proposed system also provides manipulation of personal workspace for the user during the remote cooperative work. We conducted a user study to prove effectiveness of the proposed system. According to the results, the proposed system increased understanding spatial information and usage of time during the remote cooperative work.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.2
• /
• pp.15-24
• /
• 1996

To generate workspace analytically using the robot kinematics, data on range of human joints motion, especially range of two degrees of freedom motion, are needed. However, these data have not been investigated up to now. Therefore, in this research, we are to investigate an interaction effect of motions with two degrees of freedom occurred simultaneously at the shoulder, virtual hip(L5/S1) and hip joints, respectively, for 47 young male students. When motion with two degrees of freedom occurred at a joint such as shoulder, virtual hip and hip joints, it was found from the results of ANOVA that the action of a degree of freedom motion may either decrease or increase the effective functioning of the other degree of freedom motion. In other words, the shoulder flexion was decreased as the shoulder was adducted or abducted to $60^{\circ}C$TEX>or abducted from $60^{\circ}C$TEX>to maximum degree of abduction, while the shoulder flexion increased as the joint was abducted from $60^{\circ}C$TEX> to $60^{\circ}C$TEX> The flexion was decreased as the virtual hip was bent laterally at the virtual hip joint, and also did as the hip was adducted or abducted from the neutral position. It is expected that workspace can be generated more precisely based the data on the range of two degrees of joint motion measured in this study.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.621-625
• /
• 2005

This paper presents a new hybrid serial-parallel robot(HSPR), which has six degrees of freedom driven by ball screw linear actuators and motored joints. This hybrid robot design presents a compromise between high rigidity of fully parallel manipulators and extended workspace of serial manipulators. The hybrid robot has a large, singularity-free workspace and high stiffness. Therefore, the presented kinematic structure of the hybrid robot is particularly suitable for multi-tasking machining processes such as milling, drilling, deburring and grinding. In addition to the machining processes, the hybrid robot can be used for welding, fixturing, material handling and so on. The study on design of the hybrid robot is performed. A kinematic analysis and mechanism description of the hybrid robot with six-controlled degree of freedom is presented. In the virtual design works by DADS, workspace and force analysis are discussed. A numerical model is treated to demonstrate our analysis and to determine the range of permissible extension of the struts. Also, we determine some important design parameters for the hybrid robot.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.171-177
• /
• 2010

This paper presents the development of a new 6-DOF parallel-kinematic motion simulator. The moving platform is connected to the fixed base by six P-S-U (Prismatic-Spherical-Universal) serial chains. Comparing with the well-known Gough-Stewart platform-type motion simulator, it uses commercialized linear actuators mounted at the fixed base whereas a 6-UPS manipulator uses telescopic linear ones. Therefore, the proposed motion simulator has the advantages of easier fabrication and lower inertia over a 6-UPS counterpart. Furthermore, since most forces acting along the legs are transmitted to the structure of linear actuators, smaller actuation forces are required. The inverse position and Jacobian matrix are analyzed. In order to further increase workspace, inclined arrangement of universal joints is introduced. The optimal design considering workspace and force transmission capability has been performed. The prototype motion simulator and PC-based real-time controller have been developed. Finally, position control experiment on the prototype has been performed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.101-109
• /
• 2005

Ultra-precision positioning systems basically require high natural frequency and sufficient workspace. To cope with this requirement, flexure hinge mechanisms have been proposed. However, previous designs are hard to satisfy the functional requirements of the system due to difficulty in modeling and optimizing process applying an independent axiomatic design. Therefore, this paper proposes a new design and design-order based on semi-coupled axiomatic design. A planar 3 DOF parallel type micro mechanism is chosen as an exemplary device. Based on preliminary kinematic analysis and dynamic modeling of the system, an optimal design has been carried out. To check the effectiveness of the optimal parameters obtained from theoretical approach, simulation is performed by FEM. The simulation result shows that a natural frequency of 200.53Hz and a workspace of $2000{\mu}m{\times}2000{\mu}m$ can be ensured, which is in very close agreement with the specified goal of design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.433-439
• /
• 2010

This paper proposes a beacon color code scheduling algorithm for the localization of multiple robots in a multi-block workspace. With the developments of intelligent robotics and ubiquitous technology, service robots are applicable for the wide area such as airports and train stations where multiple indoor GPS systems are required for the localization of the mobile robots. Indoor localization schemes using ultrasonic sensors have been widely studied due to its cheap price and high accuracy. However, ultrasonic sensors have some shortages of short transmission range and interferences with other ultrasonic signals. In order to use multiple robots in wide workspace concurrently, it is necessary to resolve the interference problem among the multiple robots in the localization process. This paper proposes an indoor localization system for concurrent multiple robots localization in a wide service area which is divided into multi-block for the reliable sensor operation. The beacon color code scheduling algorithm is developed to avoid the signal interferences and to achieve efficient localization with high accuracy and short sampling time. The performance of the proposed localization system is verified through the simulations and the real experiments.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.75-82
• /
• 2011

The objective of this study was to identify risk factors associated with the occurrence of musculo-skeletal symptoms of cashiers and provide suggestions for an improved workspace design. Workload and exertion of each task were measured using job analysis and posture analysis. The three most time-consuming tasks were waiting (43.8%), scanning (23.5%) and payment transaction (22.9%). It was analyzed that the workspace can be improved by applying Korean anthropometric data to the design of the desk height. The most common posture was a standing posture with neutral back, and bent lower arms and hands. Finally, it was revealed that 'scanning' and 'payment transaction' seemed more stressful than other operations. The result of the ergonomic evaluation would be a useful basis for designing an improved workspace.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.116-122
• /
• 2022

This study proposed a method of testing the stability when selecting gears to reduce the weight of a 3-DOF wrist mechanism for a pick-and-place 3-DOF parallel robot with an increased workspace by using an additional straight axis at its top. We performed SolidWorks^® modeling- and ANSYS^®-based structural analysis of a pinion gear, which is most vulnerable to the force from a 3-DOF wrist mechanism, to lighten the robot weight for performing various tasks. When the initial analysis results considerably differed from the theoretical values calculated in advance, we checked and identified the errors in the contact conditions or input values. Ultimately, it is believed that the methodology presented in this paper will help in mitigating errors during analysis and determine the accurate values for a lightweight 3-DOF wrist mechanism for a parallel robot with an expanded workspace.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.71-80
• /
• 2006

Collaboration has become essential in the product design process due to internationalized and specialized business environments. This study presents a real-time collaborative 3D design workspace for distributed designers, focusing on the development and the evaluation of new interaction techniques supporting nonverbal communication such as awareness of participants, shared manipulation and tele-presence. Requirements were identified in terms of shared objects, shared workspaces and awareness through literature reviews and an observational study. An Augmented Reality based collaborative design workspace was developed, in which two main interaction techniques, Turn-table and Virtual Shadow, were incorporated to support shared manipulation and tele-presence. Turn-table provides intuitive shared manipulation of 3D models and physical cues for awareness of remote participants. Virtual shadow supports natural and continuous awareness of location, gestures and pointing of partners. A lab-based evaluation was conducted and the results showed that interaction techniques effectively supported awareness of general pointing and facilitated discussion in 3D model reviews. The workspace and the interaction techniques can facilitate more natural communication and increase the efficiency of collaboration on virtual 3D models between distributed participants (designer-designer, engineer, or modeler) in collaborative design environments.