• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.520-524
• /
• 2004

In this work, a novel spherical 3-dof parallel mechanism is proposed and analyzed. The mechanism consists of three RRPS serial subchains and an additional passive 3-dof type serial subchain. Three RRPS serial subchains alone may form a structure of 6-DOF Stewart Platform mechanism. However, in the proposed mechanism, an additional passive serial subchain acts as constraints to restrict the output motion of the mechanism within 3-DOF spherical space. The closed form solutions of position analysis of the proposed mechanism and its first-order kinematic model are derived. Then its workspace size and kinematic characteristics are examined via kinematic isotropic index.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.395-400
• /
• 1994

Most of Commercial Remote Center Compliance(RCC) devices have been designed using deformable structures. In this work, we propose another type of assembly devices which generate the compliance effects by attaching the compliances (or spring) at the joints of the given mechainsm. The compliance models are derived for a serial-type, parallel-type, and hybrid-type mechanisms, respectively. In particular, a planar three-degree of freedom parallel structure is shown to have RCC points at the center of the workspace for its symmetric configuratings.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2219-2226
• /
• 2017

This paper deals with artificial neural network approach for automatic detection of severity level of stator winding fault in induction motor. The problem is faced through modelling and simulation of induction motor with inter coil shorting in stator winding. The sum of the absolute values of difference in the peak values of phase currents from each half cycle has been chosen as the main input to the classifier. Sample values from workspace of Simulink model, which are verified with experiment setup practically, have been imported to neural network architecture. Consideration of a single input extracted from time domain simplifies and advances the fault detection technique. The output of the feed forward back propagation neural network classifies the short circuit fault level of the stator winding.

• Journal of Computing Science and Engineering
• /
• v.7 no.2
• /
• pp.122-131
• /
• 2013

The MPI CyberMotion Simulator provides a unique motion platform, as it features an anthropomorphic robot with a large workspace, combined with an actuated cabin and a linear track for lateral movement. This paper introduces the simulator as a tool for studying human perception, and compares its characteristics to conventional Stewart platforms. Furthermore, an experimental evaluation is presented in which multimodal human control behavior is studied by identifying the visual and vestibular responses of participants in a roll-lateral helicopter hover task. The results show that the simulator motion allows participants to increase tracking performance by changing their control strategy, shifting from reliance on visual error perception to reliance on simulator motion cues. The MPI CyberMotion Simulator has proven to be a state-of-the-art motion simulator for psychophysical research to study humans with various experimental paradigms, ranging from passive perception experiments to active control tasks, such as driving a car or flying a helicopter.

• Korean Institute of Interior Design Journal
• /
• no.1
• /
• pp.52-55
• /
• 1992

The purpose of this study was to suggest the spatial structure among residential behaviors in relation to work space. To find the structure, Multi-Dimensional Scaling analysis was used. Respondents were 349 middle income housewives living in apartments in the area of Caopital region. Data were collected through the questinnaire survey. For the future residential interior design, following points were sugtested. A laundary space neess to be developed independently , being separated from both bathroom and kitchen/dining space. A new area which will give housewives some territoriality and also function as home office needs to be considered. A space configuration which satisfies the organic relationships among laundary behaviors such as washing dying, ironing and folding , needs to be systematically planned, with two adjoining separate zones of wet and dry utility . The present bathroom nees to be more incorporated to the private bedroom rather than to workspace.

• Industrial Engineering and Management Systems
• /
• v.14 no.1
• /
• pp.94-103
• /
• 2015

The purpose of this paper is to provide a review of the background information regarding to the impact of personal control over the physical work environment on satisfaction with work environment and creativity at work. Today creativity has a significant and special place in business especially in innovative organizations which need creative people to generate new, and useful ideas for produce new products, services, work methods, systems etc. Moreover the design and appearance of workspace and individual ability to control the ambient conditions of the workplace have significant effect on their behavior, satisfaction and overall outcome including creativity. So the result of this study will contribute towards enhancing the understanding of the effect of office design to enhance employees' creativity.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1190-1194
• /
• 2007

Since the dismantling processes of building are very dangerous, there have been many studies to develop a remote operating devices using joystick. In this paper, in order to improve the operability of the dismantling actuator that is usually an excavator, a novel concept of tele-operated haptic device is proposed. Operators who use this haptic device with additional environmental sensing devices can work safely away from the dangerous sites. First, based on the concept design of the haptic device, the workspace mapping from the haptic device to the excavator is explored. Second, the kinematics which deals with the conversion from the 3 dimensional position information of the haptic device to the joint variable information of the backhoe is included. Lastly, 3D graphical simulation of both haptic device and the backhoe will be shown. This new design of the haptic device can be easily manufactured and gives the workers very convenient and transparent remote control capability.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.76-80
• /
• 2001

A binary parallel robot manipulator uses actuators that have only two stable states being built by stacking variable geometry trusses on top of each other in a long serial chain. Discrete characteristics of the binary manipulator make it impossible to analyze an inverse kinematic problem in conventional ways. We therefore introduce new definitions of workspace and inverse kinematic solution, and the apply a genetic algorithm to the newly defied inverse kinematic problem. Numerical examples show that our genetic algorithm is very efficient to solve the inverse kinematic problem of binary robot manipulators.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.176-182
• /
• 1999

This paper presents a new autonomous kinematic calibration technique by using a laser-vision sensor called "Perceptron TriCam Contour". Because the sensor measures by capturing the image of a projected laser line on the surface of the object, we set up a long, straight line of a very fine string inside the robot workspace, and then allow the sensor mounted on a robot to measure the point intersection of the line of string and the projected laser line. The point data collected by changing robot configuration and sensor measuring are constrained to on a single straght line such that the closed-loop calibration method can be applied. The obtained calibration method is simple and accurate and also suitable for on-site calibration in an industrial environment. The method is implemented using Hyundai VORG-35 for its effectiveness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.100-108
• /
• 2004

In this paper, the new casing oscillator, which is a construction machine and which structure is similar to that of a parallel manipulator with redundancy, is proposed. The singularity analysis of this machine is performed by two different methods. First, the singularities are found by the numerical method at configurations where the rank of the Jacobian matrix becomes deficient. The singularities are outside the workspace. To investigate the physical information on these configurations, the singularities are examined by the geometric method at configurations where the casing oscillator cannot resist the external forces and moments applied to the upper platform due to losing static equilibrium. The results of the geometric method are the same as those of the numerical method. It proves that the new casing oscillator is free from the singularity, which causes serious problems to a parallel manipulator.