• 제목/요약/키워드: workplace safety accidents

검색결과 184건 처리시간 0.02초

중·소규모 공정안전관리 사업장의 웹 전산시스템 개발 (A Development of Facility Web Program for Small and Medium-Sized PSM Workplaces)

  • 김영석;박달재
    • Korean Chemical Engineering Research
    • /
    • 제60권3호
    • /
    • pp.334-346
    • /
    • 2022
  • 중·소규모 사업장에서 중대산업사고가 발생되고 있는 원인 중 하나는 공정안전관리(PSM) 체계를 이해하고 적용하는데 관련 지식 및 정보 부족이다. 이를 해결하기 위해서는 PSM에 대한 실질적이며 지속적인 이행 수준을 확보하고 추적관리를 통해 인적오류를 제거할 수 있는 프로토콜이 뒷받침되어야 하나 그동안 이에 대한 연구가 미흡하였다. 이에 본 연구에서는 고용노동부 고시의 규정과 전국 300인 미만 중·소규모 PSM 사업장 200여 개사를 대상으로 행정처분 위반 사례를 조사·분석하였다. 이를 기반으로 설비유지관리 웹프로그램을 개발하여 중·소규모 사업장의 인적오류 제거를 통한 중대산업사고예방에 기여하고자 하였다. 본 연구를 통해 얻어진 주요 연구결과는 다음과 같다. 첫째, 프로그램 접근 편의성을 위해 스마트 기기에서 QR코드를 통해 웹에 접속하여 설비의 제원 검색 기능, 고장 사유, 사진을 확인함으로써 실시간 점검, 정비요청을 할 수 있게 하였다. 둘째, 변경 대상 파악, 위험성 평가, 작업자 교육, 가동 전 점검을 프로그램과 연계하여 작업 시작 전부터 종료까지 모든 절차를 관리자가 추적관리 가능하도록 하였다. 셋째, 작업 완료 후 개선된 사진과 함께 수리, 시간, 비용 등을 등록하여 축적된 자료를 기반으로 설비의 수명 예측과 신뢰성을 검증하게 하였다. 이러한 연구결과는 중·소규모 PSM 사업장에게 실질적이고 체계적인 운영에 도움이 될 수 있으며 향후 정부 주도로 중·소규모 PSM 사업장을 대상으로 스마트팩토리 구축 시 설비유지관리 웹프로그램을 개발하여 보급하는데 유용하게 활용되리라 판단된다.

화학물질 관리 연구-2. 환경부와 고용노동부의 관리 화학물질의 구분, 노출기준 및 독성 지표 등의 특성 비교 (Study on the Chemical Management - 2. Comparison of Classification and Health Index of Chemicals Regulated by the Ministry of Environment and the Ministry of the Employment and Labor)

  • 김선주;윤충식;함승헌;박지훈;김송하;김유나;이지은;이상아;박동욱;이권섭;하권철
    • 한국산업보건학회지
    • /
    • 제25권1호
    • /
    • pp.58-71
    • /
    • 2015
  • Objectives: The aims of this study were to investigate the classification system of chemical substances in the Occupational Safety and Health Act(OSHA) and Chemical Substances Control Act(CSCA) and to compare several health indices (i.e., Time Weighted Average (TWA), Lethal Dose ($LD_{50}$), and Lethal Concentration ($LC_{50}$) of chemical substances by categories in each law. Methods: The chemicals regulated by each law were classified by the specific categories provided in the respective law; seven categories for OSHA (chemicals with OELs, chemicals prohibited from manufacturing, etc., chemicals requiring approval, chemicals kept below permissible limits, chemicals requiring workplace monitoring, chemicals requiring special management, and chemicals requiring special heath diagnosis) and five categories from the CSCA(poisonous substances, permitted substances, restricted substances, prohibited substances, and substances requiring preparation for accidents). Information on physicochemical properties, health indices including CMR characteristics, $LD_{50}$ and $LD_{50}$ were searched from the homepages of the Korean Occupational and Safety Agency and the National Institute of Environmental Research, etc. Statistical analysis was conducted for comparison between TWA and health index for each category. Results: The number of chemicals based on CAS numbers was different from the numbers of series of chemicals listed in each law because of repeat listings due to different names (e.g., glycol monoethylether vs. 2-ethoxy ethanol) and grouping of different chemicals under the same serial number(i.e., five different benzidine-related chemicals were categorized under one serial number(06-4-13) as prohibited substances under the CSCA). A total of 722 chemicals and 995 chemicals were listed at the OSHA and its sub-regulations and CSCA and its sub-regulations, respectively. Among these, 36.8% based on OSHA chemicals and 26.7% based on CSCA chemicals were regulated simultaneously through both laws. The correlation coefficients between TWA and $LC_{50}$ and between TWA and $LD_{50}$, were 0.641 and 0.506, respectively. The geometric mean values of TWA calculated by each category in both laws have no tendency according to category. The patterns of cumulative graph for TWA, $LD_{50}$, $LC_{50}$ were similar to the chemicals regulated by OHSA and CCSA, but their median values were lower for CCSA regulated chemicals than OSHA regulated chemicals. The GM of carcinogenic chemicals under the OSHA was significantly lower than non-CMR chemicals($2.21mg/m^3$ vs $5.69mg/m^3$, p=0.006), while there was no significant difference in CSCA chemicals($0.85mg/m^3$ vs $1.04mg/m^3$, p=0.448). $LC_{50}$ showed no significant difference between carcinogens, mutagens, reproductive toxic chemicals and non-CMR chemicals in both laws' regulated chemicals, while there was a difference between carcinogens and non-CMR chemicals in $LD_{50}$ of the CSCA. Conclusions: This study found that there was no specific tendency or significant difference in health indicessuch TWA, $LD_{50}$ and $LC_{50}$ in subcategories of chemicals as classified by the Ministry of Labor and Employment and the Ministry of Environment. Considering the background and the purpose of each law, collaboration for harmonization in chemical categorizing and regulation is necessary.

CFD 기반 인화성 액체 누출 시 최적의 환기구 배치 도출 방안 (Method to Derive the Optimal Vent Position when Flammable Liquid Leaks Based on CFD)

  • 김은희;안승효;이준서;마병철
    • 한국가스학회지
    • /
    • 제28권1호
    • /
    • pp.11-18
    • /
    • 2024
  • 인화성 액체가 누출되면 풀에서 증발된 증기로 인해 근로자들에게 중독이나 질식 등의 피해를 불러올 수 있으며 화재나 폭발 등의 2차 사고로 이어질 수 있다. 이러한 피해를 예방하기 위하여 실내 작업장을 설계할 때 환기설비를 설치해야 한다. 이때, 누출된 화학물질의 특성에 따라 거동이 상이하므로 물질에 따른 적합한 환기구의 위치를 선정할 필요가 있다. 따라서 최적의 환기구 배치를 도출하기 위하여 3D CFD 시뮬레이션을 도입하였고 환기구 배치에 따른 환기효율을 정량적으로 평가하였다. 이때, 실내 작업장에서 인화성 액체가 누출되어 풀을 형성하는 상황을 가정하였고 풀에서 증발된 증기의 농도를 비교하여 최적의 환기구 배치를 도출하였다. 증기밀도가 큰 톨루엔을 대상물질로 하여 연구를 진행한 결과, 상부급기-하부배기일 때 환기효율이 가장 높아 동일한 유지비용으로 약 3.7배의 환기효과를 보이는 것을 확인하였다. 본 연구를 통해 작업장은 시뮬레이션 결과를 적용하여 환기구를 설치함으로써 근로자의 안전성을 확보할 수 있을 것으로 기대한다.

계산 모델을 활용한 방사선방어용 도구 두께에 따른 방사선관리구역 및 감시구역의 거리 및 피폭선량 변화 분석 : 방사선투과검사 분야 중심으로 (Variation Analysis of Distance and Exposure Dose in Radiation Control Area and Monitoring Area according to the Thickness of Radiation Protection Tool Using the Calculation Model: Non-Destructive Test Field)

  • 권다영;박찬희;김혜진;김용민
    • 한국방사선학회논문지
    • /
    • 제14권3호
    • /
    • pp.279-287
    • /
    • 2020
  • 방사선은 의료, 연구, 산업 등 다양한 분야에서 활용되고 있어 방사선 이용기관 및 방사선작업종사자의 수가 증가하고 있으며, 방사선 관련 피폭 사고도 발생함에 따라 방사선방호 및 안전에 대한 관심이 증가하고 있다. 이에 원자력안전법에서는 방사선원을 이용하는 장소에 대해서는 선량한도를 초과하지 않도록 하기 위해 차폐물을 설치하도록 규정하고 있다. 특히, 고정 설치된 차폐시설이 없는 곳에서 방사선투과검사 작업 수행 시, 일정한 선량율을 기준으로 작업장 출입 및 일반인 접근 여부를 감시하고 있다. 하지만, 고정 설치된 차폐시설 없는 곳에서의 방사선투과검사 작업 허가 신청 시, 방사선관리구역 및 (일반인) 감시구역거리 및 해당 거리에서의 피폭선량 계산에 고려해야 할 인자들은 법적으로 규정되어 있지 않다. 이에 본 연구에서는 방사선방호용 도구(납 담요, Collimator)의 특성(규격, 두께 등), 사용 선원 등을 입력 시, 자동으로 방사선관리구역 및 (일반인) 감시구역 거리와 비용을 산정해 주는 Excel model을 개발하였다. 이후 특정 가정을 바탕으로 방사선방호용 도구 두께에 따른 피폭선량 및 거리 변화율을 분석한 결과, 방사선방어용 도구의 두께가 증가함에 따라 방사선관리구역의 거리는 감소하였으나, 납 담요 두께가 25 mm, Collimator의 두께가 21.5 mm 이상부터는 거리의 변화율이 낮았다. 따라서, 해당 두께 이상의 방사선방어용 도구를 사용하고도 방사선관리구역 및 (일반인) 감시구역에서의 피폭선량이 높은 경우, 방사선방어용 도구 이외의 요소를 변화시켜 피폭선량을 낮추어야 할 것으로 예상된다. 또한, 본 연구에서는 1) 피폭선량 계산 시, 산란성 및 Build up 등을 고려하지 않은 점, 2) 납 담요 및 Collimator의 실제 모양이 아닌 직육면체와 중심이 빈 원기둥 모양으로 가정 등으로 인해 실제 피폭선량과 차이가 있다는 한계점이 있었다. 따라서, 향후 앞선 한계점들을 고려하면서 실제 작업환경에 대한 자료를 활용하여 연구를 수행한다면, 실제 작업환경을 바탕으로 방사선관리구역 거리 및 피폭선량 등에 대한 Database 구축이 가능할 것으로 예상된다.