• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1727-1732
• /
• 2010

Forensic engineering is the area of expertise of people qualified to serve as engineering experts in courts of law or during arbitration proceedings. An aerial-lifter can lift and carry load, including people, using power. Recently, failure of aerial-lifter internal parts while working and sweeping causing injuries and damage to property almost always generates conflict between the automaker and customer. Hence, the investigation of such events generally involves an engineering analysis. One of the possible reasons for accidents, such as a vehicle catching fire is the failure of oil pressure machine and the supporting pin. The results of formal inspections and engineering tests can reveal the cause for the failure of the mechanical parts. Therefore, the failure mechanism is analyzed by adopting fractography methods and by applying an instrumented indentation technique to compare the material properties of the reference part with those of the malfunctioning part.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.95-102
• /
• 2017

Modular toys for creative education require functional blocks to create various types of movements. An active drive module and a lot of passive connection blocks are needed to express motion with combination. In this paper, we propose the design of modular toys to produce various creative movements and controller structure working with them. In order to facilitate the connection between the designed modules, a connection method and a suitable mechanism are suggested. We also dealt with the design of various types of sensor modules that can work in conjunction with modular toys. Using these toys, typical standard application form that can be imitated educationally is suggested and showed the usefulness of the modular toy by actually applying it with designed modules and components. The proposed method is applied to actual educational toys, and the operation is effectively performed by recording operation and playing repetitive operation.

• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.232-243
• /
• 2009

The specialized and diversified synthetic and compounding technologies are used to meet the requirements for the advanced high performance tire tread materials with better balance of fuel economy(rolling resistance), safety(wet traction) and wear resistance. These techniques involve the methodology for the improvement of chemical and physical interaction between filler and the rubber matrix using coupling agents as well as a variety of chemically-modified solution SBRs. The research trends about the high performance functional SBRs and coupling agents which can interact with the surface of fillers and their working mechanism were investigated in the conventional carbon black-filled rubber and silica-filled SBR systems developed recently as "green tire".

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.55-63
• /
• 2000

Studies for tube spin forming have been implemented restrictively compared to spinning process, because of the complex of deformation mechanism. Especially there were not many studies by using FEM(Finite Element Method) for overcoming restriction of upper bound method. In this paper, the tube spinning process is analyzed to produce cylindrical body made by titanium alloy. In analysis, processing parameters was obtained by using upper bound method to consider material properties of titanium alloy and finite element analysis was implemented to investigate the flatness and the elongation of the titanium alloy workpiece by using ABAQUS code. The independent variables are ; material properties of workpiece, angles of roller, reduction of diameter. Three variables, two angles of roller and reduction of diameter are optimized by using the upper bound method. In this method, we can estimate the workable power, working force and reduction of diameter, and also the flatness and the elongation of workpiece by the finite elements analysis using ABAQUS/standard. The results indicates that these variables play a critical factors of spinning process for the titanium alloy and the optimum values of these variables.

• Wind and Structures
• /
• v.14 no.4
• /
• pp.285-300
• /
• 2011

Researchers at the International Hurricane Research Center (IHRC), Florida International University (FIU), are working in stages on the construction of a large state-of-the-art Wall of Wind (WoW) facility to support research in the area of Wind Engineering. In this paper, the challenges of simulating hurricane winds for the WoW are presented and investigated based on a scale model study. Three wind profiles were simulated using airfoils, and/or adjustable planks mechanism with and without grids. Evaluations of flow characteristics were performed in order to enhance the WoW's flow simulation capabilities. Characteristics of the simulated wind fields are compared to the results obtained from a study using computational fluid dynamics (CFD) and also validated via pressure measurements on small-scale models of the Silsoe cube building. Optimal scale of the test model and its optimal distance from the WoW contraction exit are determined - which are two important aspects for testing using an open jet facility such as the WoW. The main objective of this study is to further the understanding of the WoW capabilities and the characteristics of its test section by means of intensive tests and validations at small scale in order to apply this knowledge to the design of the full-scale WoW and for future wind engineering testing.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.2
• /
• pp.94-102
• /
• 2009

Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.122-129
• /
• 2015

This paper proposes a method for providing the information about multimedia streams for telepresence services to heterogeneous services such as IMS (IP Multimedia Subsystem) and RTCWeb (Real-Time Communication in WEB-browsers). First of all, we design an interworking gateway for each service and suggest a procedure for providing the information about multimedia streams, which is defined by CLUE, a working group for standardization, to the heterogeneous services. We also apply the method of the actual CLUE information exchange and implement it in our experiment environment. Finally, we show that the proposed method can exchange more information than previous methods even though the media session re-establishment time is similar to legacy systems in terms of performance analysis. With the proposed method, the heterogeneous services can collect a variety of information about the telepresence service and use it according to user preference. In this way it provides rich multimedia streaming services for many areas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.581-582
• /
• 2005

In order to apply the discharge plasma processing. to industrial areas, the control of the chemical reaction mechanism is necessary. The hybrid plasma reactor was designed for the effective treatment of wastewater and hazardous volatile organic substances. This plasma reactor was similar to the barrier discharge, and surface discharge on the dielectric surface was propagated to the water surface strongly for the heterogeneous chemical reaction at the interface between the working gas and the water surface. The discharge emission in this discharge reactor was mainly $N_2$ second positive band in the case of $N_2$ or air gas atmosphere, and intensities from OH radicals in Ar gas atmosphere were stronger than in $N_2$ or air gas atmosphere. From this result, it is necessary to apply Ar gas for the effective generation of OH radicals in this plasma reactor.

• Journal of Distribution Research
• /
• v.15 no.3
• /
• pp.35-69
• /
• 2010

Successful management of distributors is crucial for the success of multi-level marketing (MLM) because MLM sells products and services through distributor networks. The present study examines the impact of the up-line distributors' transformational leadership on down-line distributors' entrepreneurship, market orientation, and performance. The proposed research questions were examined based on a survey of 135 down-line distributors working at the largest domestic MLM company. A mediation mechanism was found that the up-line distributors' transformational leadership increases the down-line distributors' entrepreneurship and market orientation, which in turn influences their performance. Based on the findings, the present study suggests the importance of transformational leadership in MLM. Practical implications for the roles of transformational leadership and its impact on corporate management in specific business areas are also discussed.

• Journal of Science and Technology Studies
• /
• v.3 no.2 s.6
• /
• pp.1-27
• /
• 2003

Complexity paradigm is a scientific amalgam that aims to unite a range of theoretical perspectives and research agendas across natural and social sciences. Proponents of complexity paradigm lay claims to an increasing number of areas of study, including artificial life, interpersonal networks, internal/international patterning of organizations, mapping of cyberspace, etc. All of those can be subsumed under the title, 'complexity turn.' Owing to the idea of open system, complexity paradigm has developed a number of new concepts/themes/perspectives that help to account for the complex mechanism of living and non-living creatures. A complex system comprises a number of properties such as disequilibrium, nonlinearity, dissipative structure, self-organization fractal geometry, autopoiesis, coevolution. Following a brief introduction to theoretical development, those properties are succinctly discussed. The complexity turn has provided a wealth of insights that enable to analyze system operations of any kind. It contributes a lot to illuminating the working of social system as well. The most remarkable attempt may be Niklas Luhmann's 'neofunctional system theory.' Merits and shortcomings of complexity paradigm were examined and its future prospect were assessed with the conclusion that complexity paradigm would continue to be useful both as effective transdisciplinary framework and powerful analytical tool.