• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.4
• /
• pp.503-513
• /
• 2007

The obese population has been increasing worldwide and obesity has become one of the socioeconomic problems. Obesity raises more concerns as more studies regarding its direct and indirect relativity to several diseases such as type II diabetes, hypertension, etc. are published. Since leptin, an important signal in the chronic control of food intake and energy expenditure, was discovered in 1994, there has been a great accumulation of knowledge on fighting obesity by facilitating pharmacological and nutritional strategies on the molecular level of the body weight control system. In particular, evidences are accumulating that particular food components affect our physiological function and gene expressions which are associated with body weight control. In this study, we review the four mechanisms for weight control and antiobesity functional agents such as HCA, L-carnitine, CLA, chitosan, calcium supplements capsaicin contained in red pepper, and oriental herbal mixture. We also describe about the efficacy and working mechanism of these functional agents on the basis of antiobesity mechanisms.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.337-342
• /
• 2003

In this paper, a web based remote control system located at too dangerous field to access for the worker. The system was designed and implemented for three-dimensional stereo camera connected to web server which can be controlled easily by client side person working in the safe monitoring room. The user in the client side can control the vergence/focus control and zoom-in/out and pan/tilt functions through an user interface. The user interface for remote control environment was designed and implemented with Java applet mechanism, and was tested the operation result of the system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.970-979
• /
• 2006

Construction of underground structure requires higher standard of planning and design specifications than in surface construction. However, high construction cost and difficult working environment limit design level and construction quality. One of the most sensitive factors to be considered are infiltration and external pore-water pressures. Development of pore-water pressure may accelerate leakage and cause deterioration of the lining. In this paper, the development of pore-water pressure and its potential effect on the linings are investigated using physical model tests. A simple physical equipment model with well-defined hydraulic boundary conditions was devised. The deterioration procedure was simulated by controlling both the permeability of filters and flowrate. Development of pore-water pressure was monitored on the lining using pore pressure measurement cells. Test results identified the mechanim of pore-water pressure development on the tunnel lining which is the effect of deterioration of drainage system. The laboratory tests were simulated using coupled numerical method, and shown that the deterioration mechanism can be reproduced using coupled numerical modelling method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1504-1511
• /
• 2005

The efficiency of the hydraulic transport of soil-water mixtures is an important factor in designing and operating a pump & pipeline system and is directly connected with dredging cost and working period. However, the hydraulic transport mechanism in the slurry flow inside the pipeline such as frictional losses, specific energy consumption, deposition velocity has not been well established. In this study a new dredging test loop system was designed and built. It is composed of a slurry pipeline with pipes of different diameters, a centrifugal slurry pump and a diesel engine connected with the slurry pump. and equipped with modern measuring facilities that enable to measure all important characteristics of a transportation system. The objective of this paper is to discuss the efficiency of the hydraulic transport of the Jumoonjin sand-water mixtures in the dredging test loop and to present simple equations induced from the test results of the loop that can express the transport product and the transport productivity.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.379-384
• /
• 2017

An electrochemical reduction of a mixture of NiO and rare earth oxides has been conducted to increase the reduction degree of rare earth oxides. Cyclic voltammetry (CV) measurement was carried out to determine the electrochemical reduction behavior of the mixed oxide in molten LiCl medium. Constant voltage electrolysis was performed with various supplied charges to understand the mechanism of electrochemical reduction of the mixed oxide as a working electrode. After completion of the electrochemical reduction, crystal structure of the reaction intermediates was characterized by using an X-ray diffraction method. The results clearly demonstrate that the rare earth oxide was converted to RE-Ni intermetallics via co-reduction with NiO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.246-249
• /
• 2000

The effects of Zr on the mechanical workability and tensile strength of Cu-Ni-Mn-Sn-Al alloys have been investigated and the following results were obtained. The mechanical workability of Cu-Ni-Mn-Sn-Al alloys are increased with addition of Zr. And the surface cracks of specimen were not produced in Zr added Alloys. Especially in condition of hot-worked beyond the 90% working ratio, Zr contained specimen showed intra-granule crack propagation but Zr-free specimen showed inter-granule mode. The tensile strength have maximum value in 0.05% Zr contained alloy. The aging mechanism of Cu-Ni-Mn-Sn-Al alloys were varied by Zr addition.

• Speech Sciences
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2005

The phenomenon of vocal vibrato may be regarded as an acoustic representation of one of the most rapid and continuous changes in pitch and intensity that the human vocal mechanism is capable of producing. Singers are likely to use vibrato effectively to enrich their voice. The purpose of this study was to obtain acoustic measurements (vF0 and vAm) of 45 subjects (15 trot and 15 ballad singers and 15 non-singers) and to compare acoustic measurements of the vowel /a/ produced by 3 groups on 2 voice sampling conditions (prolongation and singing of /a/). Thirty singers of trot and ballad were selected by a producer and a concert director working for the KBS (Korean Broadcasting System). The MDVP was used to measure the acoustic parameters. A two-way MANOVA was used for statistical analyses. The results were as follows; Firstly, there was no significant difference among the 3 groups in vF0 and vAm in prolongation of /a/, but in singing voice, there was a significant difference among 3 groups in vF0 and vAm. Secondly, there was an interaction between music genre and voice sampling condition in vF0, and vAm. Finally, trot singers sing with more vibrato than ballad singers. It was concluded that it is very important to analyze singers' voice including various voice conditions (prolongation, reading, conversation, and singing) and to identify differences of singing voice characteristics among music genre.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.62-67
• /
• 2012

Recently UV laser is widely used to process micro parts using various materials such as polymers, metals and ceramics because it has a very high intensity at the focused spot area. It is generally known that there are still some difficulties for alumina($Al_2O_3$) ceramics to directly make micro patterns like holes and lines on the surface of working material using 355nm UV laser because the alumina has a very low absorption coefficient at that wavelength. But nowadays new alumna with nano-porous holes is developed and applied to advanced micro functional parts of IT, BT and BT industries. In this paper, we are going to show the mechanism of photo-thermal ablation for nano-porous ceramics. Inside hole there is a lot of multiple reflections along the depth of hole. Experimentally we can find the micro hole drilling and micro grooving on the surface of nano-porous alumina.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.12
• /
• pp.1417-1426
• /
• 2009

Various types of damper are usually applied to reduce noise and vibration for mechanical systems. Especially, for washing machines, the free-friction stroke damper is installed. The behavior of the free-friction stroke damper has nonlinear characteristics such as hysteresis and viscoelastic properties because of its foam material. First of all, the dynamic experiments were carried out by using a MTS machine to find characteristics of the free-friction stroke damper. And the simulation model of the free-friction stroke damper and characteristics of a foam material were evaluated by using optimization technique. To make a good simulation model which can show the dynamic characteristics, it is important to understand the working mechanism of the damper. The Finite Element Method (FEM) technique can help us instinctively understand the damping phenomenon under operating conditions, because we can observe the condition of damper at every step in the simulation by using it. Also, by changing factors, we can comprehend the variation of characteristics of damper. So, in this paper, a study on the dynamic characteristics of free-friction stroke damper by FEM is focused on. Finally, the possibility which physical experiments can be replaced into simulations is shown.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.71-76
• /
• 2008

The focus of this paper is the designing a flexible three fingered hand system with 16 D.O.F for dynamic manipulation with an intelligent controller, and to build a useful database for dynamic manipulation based on the experimental results. The weight of the hand module is only 0.7 kg, but flexible motion and powerful grasping are possible. To achieve such a dynamic motion in a robotic hand, we have developed a flexible fingered hand with a control system incorporating image recognition system in which we deal with the problems of not only accuracy and range of motion but also the flexibility of hand. The fingers are arranged so as to grasp both circular and prismatic objects. In order to achieve the light mechanism, we reduced the number of joints and fingers as much as possible. We used three fingers, which is the minimum number to achieve a stable grasp.