• Journal of Families and Better Life
• /
• v.33 no.5
• /
• pp.37-53
• /
• 2015

The purpose of this study is to examine the differences in perceived time pressure between employed and non-employed married women in Korea. The sample of married couple from the Korean Time Use Survey 2009 (n = 6,948 couple diaries) was used to examined the difference in the level of perceived time pressure over the life cycle of two group. This study also investigated the married women's time use, husband's time use as well as hour of domestic outsourcing and whether such factors are associated with lowering perceived time pressure of married women. Results showed employed wives felt almost 3 times more time pressed than non-employed wives, and the gap mostly remained over different life cycles. Total work hours were associated with increasing the time pressure of both groups of women, while regenerating time was associated with ameliorating time pressure. The result suggests that the time pressure gap between employed and non-employed wives can be partly due to the relative length of total labor hours and regenerating time among the two groups. Ordered logit analysis revealed that husband's paid work hours were not associated with wive's feeling rushed, but husband' unpaid work hours were positively linked with time pressure of their wives. Results indicated if employed or non-employed wives are feeling very busy, there is a high chance that husband might give them some help. We found employed wives spend more hours on housework outsourcing, and purchasing goods for housework was not associated with lowering the feeling of pressure of employed wives. There were both similarity and difference in factors associated with women's feeling pressed among employed and non-employed wives. It implies that social process and it's strategies to alleviate the time pressure can be different by women's employment status.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.157-165
• /
• 2007

The Work-Related Musculoskeletal Disorders (WMSDs) can be occurred by various factors such as repetition, forceful exertions and awkward postures. Especially, occurrences of the WMSDs on the waist and lower limb are reported in workplaces, demanded standing postures for a long time, in service and manufacturing industry. The static and standing postures without movement for a long time increase work loads to the lower limb and the waist. Accordingly, anti-fatigue mat or anti-fatigue insole is used as a preventing device of the WMSDs. However anti-fatigue mats are limited in space and movement. In this study, multi-elastic insoles are designed and shown the effects of the workload reduction for a long time under the standing work. The foot pressures and EMG (Electromyography) are measured at 0 hour and after 2 hours by 6 health students in their twenties. The 6 prototype insoles are designed with three elastic (Low, Medium and High). These insoles are compared with no insole (insole type 7) as control group. The EMG measurement was conducted to waist (erector spinae muscle), thigh (vastus lateralis muscle) and calf (gastrocnemius muscle). The foot pressure is analyzed by mean pressure value and the EMG analysis is investigated through MF (Median Frequency), MPF (Mean Power Frequency) and ZCR (Zero Crossing Rate). The results of the foot pressure show that the multi-elastic insoles had smaller foot pressure value than that of no-insole. Moreover, Insole 2 and Insole 3 have the smallest increasing rate in foot pressure. The EMG results show that the multi-elastic insoles had smaller EMG shift value than that of no-insole in 2 hour, and then shift value shows the smallest value in Insole 2. Therefore, this study presents that the multi-elastic insoles have reducing effects of the work load for a long time standing work in both side of foot pressure and EMG.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.69-74
• /
• 2000

Roughness of curved surfaces finished with flexible tools depends on the tool/work contact pressure and area. In this study, non-Hertzian closely conforming elastic contact theory is employed to analyze the tool/work contact and to generate a tool path producing a constant pressure at initial contact points. Finishing experiments on curved surfaced are conducted using the tool path. For comparison, curved surface finishing is also performed along the tool path producing a constant tool/work interference depth. It is demonstrated that the tool path of constant contact pressure improves the finished surface roughness.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.22-25
• /
• 2004

The present paper investigated the correlation between acoustic pressure and heat transfer augmentation in acoustic fields. The acoustic pressure predicted by numerical work and compared with the augmentation ratio of heat transfer coefficient was experimentally measured. Also, particle image velocimetry(PIV) was used for the visualization of velocity vectors and kinetic energy distribution inside liquid region. For the numerical work, SVS programed with Fortran language and based on a coupled FE-BEM was used. Results of the present study, the acoustic pressure is increased by $60\%$ and the largest augmentation of heat transfer about $28\%$ was measured. Finally, the profiles of acoustic pressure is consistent with that of augmentation of heat transfer. It is concluded that a correlation exists between the acoustic pressure and the heat transfer augmentation.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.501-504
• /
• 2006

The estimation of the work of heart can be treated as one of the most important parameters for determining the amount of circulating blood needed for harmonious metabolism in the human body. By monitoring the work of heart, one can detect increased work load of heart and start the treatment at the early stage of CHF. Thus it is necessary to estimate the work of heart. The contractility of the left ventricle, the second important parameter for representing the motion of heart, can be estimated through information on the work of heart. In this study, the modified Windkessel model, which has been used for a measure of vascular hemodynamic impedance parameters, was adapted to estimate the work of heart.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.408-415
• /
• 2018

Background: Nursing home resident care is an ongoing topic of public discussion, and there is great interest in improving the quality of resident care. This study investigated the association between nursing home employees' job satisfaction and residents' satisfaction with care and medical outcomes. Methods: Employee and resident satisfaction were measured by questionnaire in 175 skilled nursing facilities in the eastern United States from 2005 to 2009. Facility-level data on residents' pressure ulcers, medically unexplained weight loss, and falls were obtained from the Centers for Medicare and Medicaid Services Long-Term Care Minimum Data Set. The association between employee satisfaction and resident satisfaction was examined with multiple and multilevel linear regression. Associations between employee satisfaction and the rates of pressure ulcers, weight loss, and falls were examined with simple and multilevel Poisson regression. Results: A 1-point increase in overall employee satisfaction was associated with an increase of 17.4 points (scale 0-100) in the satisfaction of residents and family members (p < 0.0001) and a 19% decrease in the incidence of resident falls, weight loss, and pressure ulcers combined (p < 0.0001), after adjusting for staffing ratio and percentage of resident-days paid by Medicaid. Conclusion: Job satisfaction of nursing home employees is associated with lower rates of resident injuries and higher resident satisfaction with care. A supportive work environment may help increase quality of care in the nation's nursing homes.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.517-527
• /
• 2004

Purpose: This research is to find a solution for educational work on high blood pressure control in public health centers by analyzing their current status. Method: It analyzed data from 133 public health centers that had been doing educational work on high blood pressure, through a questionnaire. Also, it developed recommendations by converging opinions from an expert group made of 25 people with nominal group technique. Result: The educational methods of public health centers did not make any approach to get to the goal of the work. The mass media education and campaign activities for the general public had just temporary and passive propensities. In education for patients, it did not use appropriate methods to present management techniques for diagnosis process of patients, medication management, self monitoring BP, and risk factors. Pocket book for monitoring high blood pressure was not focused on self-recording for self-management. The expert group recommended that educational materials for adults should be developed focusing on treatments and observance of risk factors through daily living, and those for children should be focused on basic understanding about diseases, and life style. Conclusion: Presenting direction and strategy of fundamental education work is needed for public health centers by giving them standard educational guidelines of managing high blood pressure nationally, and it is desirable that fundamental frameworks of educational materials should be developed and distributed by professional groups nationally.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.59-63
• /
• 2007

The thin film of indium tin oxide (ITO) was prepared using the inclination opposite target type DC magnetron sputtering equipment onto the glass substrate at room temperature, using oxidized ITO with In2O3 and SnO2in a weight ratio of 9:1. The elastic modulus and hardness of the ITO thin films, prepared at different deposition conditions, were determined through anano-indentation experiment. The work pressure was varied from $2.6{\times}10-1\;to\;8.3{\times}10-1Pa$. The results show that the variation of work pressure during film deposition could vary significantly, according to the elastic modulus and hardness of the ITO thin films. It also can be seen that a minimum value exists in the film resistivity for the ITO thin films, prepared according to the variation of work pressure. However, the ITO film produced at room temperature had a microstructure in which a X ray diffraction peak is not clear, regardless of the work pressure.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.90-98
• /
• 2008

This research selects the lifting task to be the main subject. Four experiments were designed to measure which among lifting postures, lifting heights, waist-belt, and breathing control significantly influences intra-abdominal pressure (Gallagher, 1991; Lavender, Andersson and Natarajan, 1999). The experimental results were taken to be the recommendations of the manual materials handling work design. The research findings reveal that the symmetrical stoop posture is the most significant to the intra-abdominal pressure within all lifting postures. When the lifting height is increased, the intra-abdominal pressure produced relatively goes up. Also, the combination of symmetrical stoop posture, waist-belt use, and inspiration and holding at the same time is the most efficient in carrying out lifting tasks. Simultaneously, the research discovers that for any posture, the volume of the intra-abdominal pressure is much bigger when using the waist-belt compared to when it is not used. Therefore, the waist-belt design for the lifting works might be the future research approach.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.375-382
• /
• 2021

Purpose: The objectives of the present study were to investigate the disadvantages of tire pressure asymmetry of a wheelchair tire and recommend the criterion for appropriate tire pressure without generating negative changes in the musculoskeletal system in asymptomatic participants. Methods: Fourteen asymptomatic participants were asked to sit in pressure-controlled wheelchairs and perform desk work for 20 minutes in each tire condition. The asymmetry of the tire conditions was set as 0% difference, 25% difference, and 50% difference from the recommended pressure. The pelvic alignment and muscular recruitment represented as a flexion-relaxation ratio (FRR) were measured at pre-test, and after each condition of desk work. The displacement of the center of pressure (COP) was measured during the desk work. Results: The tire air pressure condition significantly affected the FRR and COP (P < 0.05). Both sides of the FRR values were significantly higher under the symmetrical tire conditions (0% difference) and pre-test, compared with the asymmetrical tire condition of 50% difference (P < 0.05). The mediolateral COP displacement of the asymmetrical tire conditions (25% and 50% difference) was significantly higher than that of the symmetrical tire conditions (0%) (P < 0.05). Conclusion: Asymmetrical tire conditions could cause changes in the muscle recruitment pattern of the erector spine and mediolateral COP displacement. Tire pressure asymmetry higher than 50% could be a risk factor for prevalence of back pain, so this level of asymmetry in tire pressures should be cautioned against for wheelchair users.