• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.69-79
• /
• 2012

Importance of the work-related musculoskeletal disorders (WMSDs) has been increasing in the hospital industry such as health care industry and financial industry. This study investigated in order to identify the factors like general, occupational and ergonomically characteristics of the subjects related to musculoskeletal disorders (MSDs) of physical therapists (PTs). Ergonomic tools of rapid upper limb assessment (RULA) were used for evaluation workload of the tasks. Prevalence of MSDs were 13 PTs (26.0%) for neck, 31 PTs (62.0%) for shoulder, 9 PTs (18.0%) for arm/elbow, 27 PTs (54.0%) for hand/wrist, 28 PTs (56.0%) for back, 14 PTs (28.0%) for leg/foot. The analysis of the rate of the pain intensity showed that 53.5% subjects experience moderate pain and 14.0% subjects experience severe pain. Factors which were general characteristics, for example, height, ergonomically characteristics such as 'Posture Score A' were related musculoskeletal subjective symptoms in logistic analysis (p<.05). Among physical therapists, action level of RULA were action level 2 (6.0%), action level 3 (52.0%), action level 4 (42.0%). Physical therapists were estimated one of the highest risk factor in this study. This study suggested that the need of preventive education and program for PTs (physical therapists). Comprehensive and systematic management plans should be established to include both ergonomic and sociopsychological aspects.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.933-942
• /
• 2010

Objective: To develop an ergonomic evaluation tool which can be apply to assess the lower-limb postures associated with farming tasks. Background: In general, most of existing ergonomic assessment tools was developed to investigate the work-related musculoskeletal disorders of the upper-limb postures in manufacturing industry. Methods: As the first step of development of the evaluation tool, 13 lower-limb postures that were commonly observed in farming task were investigated by the subjective discomfort ratings, heart rates, and muscle activities. And then, an ergonomic evaluation tool for the lower-limb postures was developed based on results of the first experiment. Lastly, the ergonomic checklist which was developed in the current study was compared with other existing ergonomic assessment tools. Results: Based on the results of comparisons between a newly developed assessment tool and other existing assessment tools, it was found that a newly developed tool can perceive more sensitively for the various lower-limb postures than other assessment tools. Conclusions: Lower-limb posture assessment tool which can evaluate and assess risks of lower-limb WMSDs which were prevalent in farming tasks more easily and accurately was developed in this study. The lower-limb assessment tool can also be utilized to prevent WMSDs related with lower-limbs as well as improve working environments.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2011

It has been very important to have an exact evaluation for risk factors in order to prevent WMSDs(Work-related Musculoskeletal Disorders). However, most WMSDs evaluation methods have always been some problems of possibilities associated with subjective evaluation. Therefore, this study tried to conduct a sort of usability analysis on three major evaluation methods(OWAS, RULA, REBA). Specifically, major subjects in the study consisted of three parts as follows; comparison of the results between experienced and inexperienced observers, analysis for the consistency of the results in terms of different evaluation times, and analysis for the consistency of the results in terms of different job characteristics(based on the part of the automobile). The results of the study were summarized as follows; 1) There was statistically significant difference of the results by RULA and by REBA between experienced and inexperienced observers. This might be due to the fact that experienced observers have had better ability to detect the important working posture during evaluation. However, the results by OWAS did not give any significantly different results between experienced and inexperienced observers, 2) All three checklists applied by experienced subjects did not show any single result significantly different in terms of different evaluation times. This might have to do with high intra-observer reliability from some of previous studies, 3) The five parts of an automobile were selected as five major jobs with different job characteristics in the automobile industry. Specifically, they were door part, front part(hood, etc.), inside part(dash board, seats, etc.), rear part(trunk etc.), and bottom part. All three methods did not show any significant differences for the results from each observers. Further study on this subject would eventually provide a sophisticated evaluating guidelines for WMSDs regarding determination of observer-specific evaluation, identification of repetitive number of evaluations for stable results for each checklist, determination of job-specific evaluation methods, and so on.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.107-118
• /
• 2012

Objectives: This study examines the occurrence of disease resulting from low back pain and factors of working environment meaningfully influencing the occurrence of lumbago as well as analyzes '2nd Korean Working Condition Survey (KWCS)' conducted in 2010 so as to establish the prevention and improvement measures. Methods: The analysis method is that it is to compare the prevalence rate of low back pain according to working environment via odds ratio and to implement the test about the factors having the difference in working environment between low back pain group and normal group through weighted t-test. Results: As a result, it indicates that there is a meaningful difference for prevalence rate of low back pain according to age, status in employment and education level which are socio-demographical factors. The analysis in working hours shows that the period of work is a factor raising the prevalence rate of low back pain rather than weekly working hours. The analysis in the work risk factor indicates that the increase in prevalence rate of low back pain takes place to either workers with repetitive movement and continuously standing posture or those with heavy stress and emotional labour. Conclusions: Workers with low back pain have suffered from accident, depression, anxiety disorder and sleep. The factors in which the prevalence rate of low back pain decrease are to provide information on health and safety and working speed, and enough rest.

• Journal of Korean Society for Quality Management
• /
• v.49 no.3
• /
• pp.245-254
• /
• 2021

Purpose: In order to accurately reach an underwater projectile to a target point, reliable INS and accurate arrangement of INS between master and slave INS is paramount. Unlike terrestrial and aerial environments, underwater projectile will operates in a restricted environment where location information cannot be received or sent through satellites. In this report, we review the factors affecting the transfer alignment of master and slave INS, as well as how to improve the positional error between INS through improved transfer alignment algorithms. Methods: In this work, we propose an improvement algorithm and verify it through simulation and driving test. The simulation confirmed the difference in the transfer alignment azimuth by fitting the MINS and SINS indoors, displacement in posture, and the process of transfer alignment between MINS and SINS through a driving test to confirm algorithm can improve the arrangement. Results: According to this study, reason for the error in the transfer alignment between MINS/SINS is the factors of the system where movements such as roll, pitch, yaw are not inter locked in real time due to the delay in transmit/receive system. And confirm that the improved algorithm has a desirable effect on accuracy. Conclusion: Through this work, it is possible to identify ways to improve the accuracy of underwater projectiles to reach their target points under various underwater environments and launch condition.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.432-438
• /
• 2021

Background: We aimed to investigate the prevalence of low back pain (LBP) and its associated agricultural work-related, biomechanical factors among this population. Methods: We analyzed initial survey data from the Safety for Agricultural Injury of Farmers cohort study involving adult farmers in Jeju Island. The prevalence of LBP was calculated with associated factors. Results: In total, 1,209 participants were included in the analysis. The overall prevalence of LBP was 23.7%. Significant associations for LBP were the type of farming activity, length of farming career, prior agricultural injury within 1 year, and stress levels. Multivariate logistic regression analysis revealed three biomechanical factors significantly related to LBP: repetitive use of particular body parts; the inappropriate posture of the lower back and neck. Conclusions: Some occupational, and biomechanical risk factors contribute to LBP. Therefore, postural education, injury prevention education, and psychological support will be needed to prevent LBP.

• Safety and Health at Work
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2021

Background: Neck pain is a major public health problem among sewing machine operators working in textile factories. Even though the textile industries are growing in number in Ethiopia, but there is a dearth of published studies on the prevalence of neck pain. Therefore, this study was aimed to assess the prevalence and associated factors of neck pain among sewing machine operators of garment factories in Mekelle city. Method: An institutional-based cross-sectional study design was implemented among 297 sewing machine operators' working in garment factories in Mekelle city. A systematic random sampling technique was used. Data were collected through interviews and analyzed using Statistical Package for Social Science version 23. Finally, variables with 95% confidence interval (CI): p < 0.05 in the multivariate analysis were significantly declared. Results: Two hundred ninety-seven sewing machine operators were enrolled, with 98.7% response rates. In this study, the 12-month prevalence rate of neck pain was found to be 42.3% (95% CI: 36.6%-47.9%), and variables like such as break time [adjusted odds ratio (AOR): 5.888, 95% CI: (2.775-12.493)], working hours per day [AOR: 6.495, 95% CI: (2.216-19.038)], static posture [AOR: 4.487, 95% CI (1.640-12.275)], and repetitive activity [AOR: 4.519, 95% CI:(2.057-9.924)] were associated with neck pain. Conclusion: In this study, neck pain is a major public health problem. Continuous work without break time, working greater than 8 hours per day, sitting in the same position for greater than 2 hours, and high repetitive activities were found significantly associated with neck pain. Owners and governmental bodies need to focus on developing preventive strategies and safety guidelines.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.1-9
• /
• 2023

Objective: This study identifies the difference among the heights of a chair's backrest (High, Mid, No), the biomechanical changes chair users undergo over time, and the variables that can measure musculoskeletal disorders, eventually providing information on the appropriate type of backrest. Method: Eleven healthy subjects in their 20s and 30s who had no experience with musculoskeletal disorders or surgical operations within the last 6 months participated in this study. Computer typing tasks were randomly designated and performed according to the type of chair backrest, and evaluation was performed for Flexion-Relaxation Ratio (FRR) analysis after the computer typing tasks. This study used eight infrared cameras (sampling rate: 100 Hz) and nine-channel electromyography (sampling rate: 1,000 Hz). ANOVA with repeated measures was conducted to verify the results, with the statistical significance level being α = .05. Results: Although there was no significant difference in craniovertebral angle (CVA), this study showed time and interaction effects depending on the height of the backrest (p<.05). When working without the backrest, the head-spine angle was lower compared to the chairs with backrest, based on the computer work. As for the head angle, the higher the back of the chair was, the less the head flexion and the body angle became, whereas the body flexion became less when there was a backrest. In addition, the body flexion increased over time in all types of backrests (p<.05). The muscle activity of the upper body tended to be high in the high backrest chair. On the other hand, a lower muscle activity was found with a low backrest. Conclusion: These results show that a chair is more ergonomic when the body angle is correctly set without bending and when it is supported by a low backrest. Accordingly, this study determines that the backrest affects shoulder and neck musculoskeletal disorders during typing and that medium-height backrest chairs can help prevent musculoskeletal disorders, contrary to the expectation that high-backrest chairs are preferable.

• Design Convergence Study
• /
• v.16 no.5
• /
• pp.177-190
• /
• 2017

This research aims to suggest a multimodal non-touch gesture interface design to improve the usability of 3D sculpting task. The task and procedure of design sculpting of users were analyzed across multiple circumstances from the physical sculpting to computer software. The optimal body posture, design process, work environment, gesture-task relationship, the combination of natural hand gesture and arm movement of designers were defined. The preliminary non-touch 3D S/W were also observed and natural gesture interaction, visual metaphor of UI and affordance for behavior guide were also designed. The prototype of gesture based 3D sculpting system were developed for validation of intuitiveness and learnability in comparison to the current S/W. The suggested gestures were proved with higher performance as a result in terms of understandability, memorability and error rate. Result of the research showed that the gesture interface design for productivity system should reflect the natural experience of users in previous work domain and provide appropriate visual - behavioral metaphor.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.803-811
• /
• 2021

In this study, the exposure amount of IASCC test worker was evaluated by applying the process simulation technology. Using DELMIA Version 5, a commercial process simulation code, IASCC test facility, hot cells, and workers were prepared, and IASCC test activities were implemented, and the cumulative exposure of workers passing through the dose-distributed space could be evaluated through user coding. In order to simulate behavior of workers, human manikins with a degree of freedom of 200 or more imitating the human musculoskeletal system were applied. In order to calculate the worker's exposure, the coordinates, start time, and retention period for each posture were extracted by accessing the sub-information of the human manikin task, and the cumulative exposure was calculated by multiplying the spatial dose value by the posture retention time. The spatial dose for the exposure evaluation was calculated using MCNP6 Version 1.0, and the calculated spatial dose was embedded into the process simulation domain. As a result of comparing and analyzing the results of exposure evaluation by process simulation and typical exposure evaluation, the annual exposure to daily test work in the regular entrance was predicted at similar levels, 0.388 mSv/year and 1.334 mSv/year, respectively. Exposure assessment was also performed on special tasks performed in areas with high spatial doses, and tasks with high exposure could be easily identified, and work improvement plans could be derived intuitively through human manikin posture and spatial dose visualization of the tasks.