• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.21-28
• /
• 2005

For the proper conservation of wooden cultural properties, non-destructive evaluation (NDE) method, which can be used to quantitatively evaluate the internal state of wood members, are needed. In this study, an ultrasonic CT system composed of portable devices was attempted, and the capacity of this system was verified by reconstructing the CT images for two phantoms and two artificially defected specimens. Results from this study showed that the sizes of detected defects were enlarged and the shapes were distorted on the CT images. Also, the positions were shifted somewhat toward the surface of specimen, which is regarded due to the anisotropic property of wood. Compared to the filtered back-projection method, SIRT (simultaneous iterative reconstruction technique) method was determined to be more efficient as the algorithm of image reconstruction for wood. A new ultrasonic CT system is thought to be used as a NDE method for wood. However wood characteristics and wave diffraction within wood made it difficult to accurately evaluate the size, shape and position of defects. To improve the quality of CT image of wood, more research including the relationship between wood and ultrasound is needed, and wood properties should be taken into consideration on the image reconstruction algorithm.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.314-326
• /
• 2022

Investigation of conservation status, optical survey, infrared thermography, and ultrasonic examination were performed on Avalokitesvara Bodhisattva mural and Buddhist Monk Bodhidharma mural to determine the conservation status and physical properties. As a result of investigation of conservation status, the types of damage are largely divided into the wall and finishing layer damage, painting layer degradation, damage due to restoration materials, stains and contamination, and biological damage. As a result of the optical survey, drawing, stains, and repainted site were confirmed. Result of the infrared thermography, the delamination of the finishing layer was confirmed, and some locations and shapes of the wooden lath inside the wall were identified. The result of the 3D scanning, the deviation, and the separation of the wall was confirmed. As a result of ultrasonic examination, it was confirmed that the physical properties of the mural were identified and the ultrasonic speed was relatively low due to physical damage such as delamination and exfoliation of the finishing layer and cracking. Ultrasonic speed values were also high in some wall cracks or delamination, and it was confirmed by the infrared thermography results that the wooden lath inside the wall was located in those parts. It was possible to understand that the wooden lath inside the walls affects the ultrasonic speed during the ultrasonic examination. Therefore, management through periodic inspection of the relevant elements is necessary, and a countermeasure for damage that may occur in the future should be prepared along with intensive monitoring of the major damage identified in this diagnosis result.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.189-197
• /
• 2008

The present study purposed to assert the necessity of cultural property disaster control through analyzing the fire of the Sungnyemun and to suggest directions for the development of cultural property disaster control in the future. For these purposes, we reviewed literature such as research papers and books on cultural property disaster control, and presented problems in current cultural property disaster control and solutions for the problems through case study of the fire of the Sungnyemun. In a word, the fire of the Sungnyemun is a representative case showing difficulty in disaster prevention activities for wooden cultural properties. Accordingly, we need to recognize the necessity of cultural property disaster control and to prepare measures. For this, first, it is essential to reinforce preventive systems against cultural property disasters. Second, early actions should be taken in consideration of the characteristics of each cultural property. Third, for cultural property disaster control, it is important to maintain cooperative relations among the Cultural Properties Administration, National Emergency Management Agency, and relevant local self.governing bodies. Lastly, standards for cultural property fire protection systems should be tightened by improving related laws, and institutional bases should be intensified through preparing grounds for aggravated punishment for crimes against cultural properties such as arsons.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.180-191
• /
• 2022

Wooden cultural heritage are exposed to the external environment as they and there are many difficulties in conservation due to their location and size. Among them, biological damage caused by termites or mold consumes a lot of money and time. Select and use wood preservatives to prevent biological damage: Wood preservatives were selected and the worst environmental conditions, temperature 60±3℃, humidity 55±5%, and light intensity of 0.35 W/m², were subjected to aging treatment to analyze chemical changes. Through the deterioration process, it was confirmed that the change in color difference decreased in the wood preservative treatment compared to the Control group. As a result of measuring the content of the active ingredient contained in the deterioration process of the wood preservative, it was confirmed that the active ingredient content of Gori22 and Bondex Preserve III was higher than that of the comparative Wood Keeper A. Through experiments, the shelf life and treatment period can be predicted by measuring the extent to which wood preservatives affect the change of wood specimens during the deterioration process and the content of active ingredients. In conclusion, various wood preservatives were prepared, and the possibility of selectively selecting wood preservatives according to the environment, topography and period was presented as a major evaluation factor.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.273-279
• /
• 2009

The descendants have a responsibility to conserve their cultural treasure and hand it down to posterity. Most of existing wooden properties, affected by environmental factors for many years, have been rebuilt or repaired many times. Kwandeogjeong, Cultural Properties Materials 322, has gone through rebuilding or repairing 11 times. It was natural that Kwandeogjeong lost its originality and attempt to restore it was made by Cultural Heritage Administration of Korea. But the restoration depends on a piece of picture, which was taken before 1900. It had been impossible to draw any data from the picture for restoration. In this study, I was able to obtain data for its restoration through geometrical analysis, using the vanishing point of the picture. These data were also used as preliminary data for its restoration.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.197-208
• /
• 2019

Biological damages of wooden cultural properties are closely related to the preservation of the environment; these damages can be accelerated because of rapid climate change. Therefore, to preserve cultural properties, it is important to understand environmental characteristics. This study aims to investigate the status of termite damage and the characteristics of major environmental factors such as micro-meteorology, meso-meteorology, and local-meteorology of the Josadang shrine in the Seonamsa temple at Suncheon. Damage was confirmed by visual observation and the response of the termite detection dog at the north-west corner. Also another damage was observed by the termite detection dog at the north-east corner. These pillars had lower surface temperature and higher moisture content compared with the pillars in the front. The mean temperature of the entire time was similar for the meteorologies; however, the relative humidity differed. High relative humidity, greater than 70%, was observed frequently. In particular, it was determined that the termite activity days were the most inside the Josadang shrine. The statistical analysis confirmed that there was a difference between the meteorology events through the F ratio. In addition, the difference of environmental factors with relative humidity and temperature was identified more great difference in relative humidity through the t-statistics of temperature and relative humidity. And then relative humidity was confirmed most great in the difference of meso-meteorology and local-meteorology.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.4
• /
• pp.295-308
• /
• 2023

This study applied a real-time IoT (Internet of Things) environmental monitoring system to wooden cultural heritages (WCHs) located in suburbs and forests in Korea. It automated the graphs of seasonal Temperature (T) and relative humidity (RH) changes inside the heritage structures and seasonal Performance Index (PI) values. While utilizing line graphs of the existing T and RH change trends and a bar graph expressing the PI values, this study examined the current status of the conservation environment inside the WCHs throughout the year and its diagnosis. Consequently, at higher latitudes, the organic cultural heritage repeatedly experienced large T fluctuations, and the risk of physical and chemical degradation of the materials was greater. However, the RH showed significant seasonal differences, even within the same latitude, indicating that the impact of latitude was not significant. Therefore, the staff in charge must manage RH by considering the surrounding environmental conditions and adjusting the internal environment of the structures. The PI values for the year-round T and RH inside the heritages were confirmed to only be a maximum of approximately 60% of the environmental suitability for conservation throughout the year, depending on the season. The relationship between the germination and growth potential period of xerophilic fungi and the monthly internal temperature and humidity in five heritages located at different latitudes was analyzed. As a result, we could thus determine that four particular months of the year (June-September) represent the periods with the highest risk of damage from xerophilic fungi in the country, regardless of latitude.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.283-290
• /
• 2020

For visual inspection-based wood identification, optical microscopy techniques typically require a relatively large sample size, and a scanning electron microscope requires a clean surface. These novel techniques experience limitations for objects with highly limited sampling capabilities such as important and registered wooden cultural properties. Synchrotron X-ray microtomography (SR-µCT) has been suggested as an effective alternative to avoid such limitations and various other imaging issues. In this study, four pieces of wood fragments from wooden members used in the Manseru pavilion of Bongjeongsa temple in Andong, Korea, wereused for identification. Three-dimensional microstructural images were reconstructed from these small wood samples using SR-µCT at SPring-8. From the analysis of the reconstructed images, the samples were identified as Zelkova serrata, Quercus sect. Cerris, and Pinus koraiensis. The images displayed sufficient spatial resolution to clearly observe the anatomical features of each species. In addition, the three-dimensional imaging allowed unlimited image processing.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.297-303
• /
• 2012

This study examines the isolation-heat performance of fire proof fabric that is equipped over ceiling board in order to secure the capability of arresting the spread of a fire at roof 'Jucsim' structure of Wooden Cultural Properties. For this examination, I conduct experiments with the model and compare two construction methods of fire proof fabric, or flat-type, folding-type. The experiments show the following results. In case of installing the fire proof fabric in flat-type, when the temperature under the ceiling board is $750^{\circ}C$, the temperatures over the ceiling board is $50^{\circ}C$; the difference is $700^{\circ}C$. Compared with the case of removing fire proof fabric, the temperature over the ceiling board is lower by approximately $580^{\circ}C{\sim}600^{\circ}C$. Therefore it can be said that the construction of fire proof fabric enhances the isolation-heat performance. In case of installing the fire proof fabric in folding-type, when the temperature under the ceiling board is $600^{\circ}C$, the temperatures over the ceiling board is $65^{\circ}C$; the difference is approximately $530^{\circ}C$. Thus its isolation-heat performance is a little inferior to the flat-type equipment.

• Journal of Conservation Science
• /
• v.38 no.2
• /
• pp.80-86
• /
• 2022

Termites cause massive damage to wooden architectural heritage structures. Chemical treatments have been commonly used to control them. In foreign countries, physical barriers made of sheet and particles impenetrable to termite are being used as an alternative to the chemical method. To study the efficacy of physical barriers, we investigated the appropriate sand particle size that can prevent the penetration of R. speratus kyushuensis. Upon evaluating the barrier properties of sand with particle sizes ranging from 0.85 to 4.00 mm, the penetration of termites was found to be effectively blocked at a particle size range of 1.00 to 2.80 mm. At smaller particle sizes, termites managed to move the sand particles and build an almost linear mud tube to penetrate the sand layer. At larger particle sizes, the termites could penetrate the sand layer by passing through the sand gaps.