• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.351-358
• /
• 2011

인장이상재를 갖는 활엽수재의 파괴특성을 이해하기 위해 신갈나무재의 전단시험 및 휨시험을 통하여 파괴단면을 관찰하였다. 육안적으로 관찰한 결과 전단시편의 경우 정상재보다 인장이상재 시편에서 더 많은 섬유의 보풀이 관찰되었고, 함수율 30% 시편의 전단면이 10%보다 거칠고 많은 섬유의 보풀이 관찰되었다. 휨시험에 의해 파괴된 인장이상재는 정상재에 비해 목섬유가 굵고 길게 드러나 있는 것이 관찰되었다. SEM 관찰 결과 방사면 전단파괴시 정상재와 인장이상재의 목섬유는 벽내파괴에 의한 파괴형태를 보여주고 있으며, 방사유세포는 벽절단파괴에 가까운 형태로 파괴되었다. 접선면 전단파괴시 목섬유는 벽내파괴에 의한 파괴형태를 보여주고 있고 인장이상재의 목섬유의 파괴부분이 더 거칠었다. 방사유세포는 양 시편 모두 벽절단파괴에 의한 파괴 형태를 보여주었으며, 인장이상재의 방사유세포에서 절단면이 비교적 깨끗한 것으로 나타났다. 휨시험에 의한 목섬유 파면의 형태는 정상재의 목섬유에 비하여 인장이상재가 파괴 시 끝이 무디고 깨끗하게 끊어진 모습을 보여주었다.

• Journal of the Korean Wood Science and Technology
• /
• 제18권1호
• /
• pp.24-30
• /
• 1990

This study was attempted to propose a method evaluating fixation of active ingredients in Copper-Chromium-Arsenic preservatives treatment. Fixated amount of active ingredients on wood was obtained by measuring the density of surface electric charge based on $\varsigma$ potential. Data accumulated from density of surface electric charge showed that the fixated amount of preservatives on wood increased linearly as concentration of treating solution increaced, which indicatied quantitative reactions in fixation of preservatives.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.125-131
• /
• 2011

The characteristics of radio-frequency/vacuum drying Japanese larch boxed heart round logs with 150 mm and 210 mm in diameter and 2,500 mm in length, subjected to compressive loading, after the pretreatment of kerf were investigated. The results of this study were as the follows: The drying time of about 120 hours~130 hours was needed from green to about 15 percent of moisture content. The gradient of final moisture content for all specimens was very gentle in both longitudinal and transverse directions owing to dielectric heating. The surface checks seriously occurred although the occurrence extent of surface check for the kerfed specimens was slight compared with that for the control specimens because drying stress was relieved by kerf. The occurrence of surface checks for the L-specimen was more serious than that for the S-specimen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.171-172
• /
• 2017

There is some recognition that Decoration Wood-based Flooring Board in Korea is a material that inhibits the heat transfer from the substrate to the room. There is a lack of substantial research literature on the surface heat transfer and condition of Decoration Wood-based Flooring Board, which is insufficient to deal with false perceptions. In this study, the purpose of this study is to analyze the surface heat transfer characteristics of Decoration Wood-based Flooring Board and to obtain basic data to cope with recognition.

• Journal of the Korean Wood Science and Technology
• /
• 제30권4호
• /
• pp.33-40
• /
• 2002

본 연구는 한국산 주요 수종의 간벌재 및 목질재료 탄화물의 흡착 특성과 기본적인 성질과의 관계를 검토하였다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 국산 간벌재 탄화물의 메틸렌블루 흡착량(MBA)이 증가하는 경향을 보였지만, 탄화온도 600℃에서 최고치를 보이는 목재 수종도 있었다. 수종간 MBA에는 큰 차이가 있었는데 가장 큰 값은 잣나무 탄화물(134 m²/g)이였고, 가장 작은 값은 굴참나무 탄화물(34 m²/g)이였다. 또한 침엽수재는 활엽수재보다 높은 MBA를 나타냈으며, MBA와 탄화전 간벌재의 기건비중과는 부의 상관성을 나타냈다. 목질재료 탄화물의 MBA도 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 증가하는 경향을 보였고, 목질 재료간 MBA의 차이는 크지 않았다. 목질재료 탄화물의 MBA는 간벌재 탄화물에 비해 낮은 수준을 나타내는 것으로 드러났다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 간벌재 및 목질재료 탄화물의 비표면적, 총세공용적은 증가하는 경향을 보였고, 탄화온도 600℃에서 MBA의 최고치를 보인 수종은 비표면적도 같은 온도에서 최고치를 나타냈다. MBA와 비표면적 및 총 세공용적간에는 정의 상관을 보였다. 목질재료 탄화물에는 주로 미세 세공이 발달하는 것으로 밝혀졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.283-298
• /
• 2022

Wood has always been used for various day-to-day applications such as interior or exterior construction materials, and household products. However, it can undergo photodegradation and discoloration by environmental factors including ultraviolet (UV) light, and thus has shortened its service life. Bleaching or delignification of wood surfaces is a suitable solution to stabilize wood against weathering by UV because these techniques can alter or remove the chromophores in lignin, which is a main factor of wood discoloration. To improve the color stability of wood surface according to the lifespan, surface delignification was conducted using peracetic acid (PAA) and hydrogen peroxide (HP) on the woods of Larix kaempferi and Quercus mongolica. After the PAA treatment, L^* increased considerably from 60-70 to 90-95. Furthermore, wood surface color did not change significantly after UV exposure. The color differences (𝜟E^*) between before and after PPA treatment of wood showed the 4.8-12.2 of L. kaempferi, and 1.7-3.7 of Q. mongolica, respectively. The lignin-related peaks in Fourier transform infrared spectroscopy (FT-IR) spectra disappeared with increased duration of PAA treatment. These results confirmed that the lignin component was partially or completely removed after the PAA treatment; the color differences (𝜟E^*) clearly showed that there was a reduction in redness (a^*) and yellowness (b^*), and an increase in lightness (L^*) owing to the removal of lignin. Based on these results, this study demonstrated that the partial removal of lignin from wood surfaces is a fundamental method for resolving photo-degradation.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.31-38
• /
• 1999

본 연구는 재면이 약한 낙엽송재의 교실용 마루판으로의 재질개량의 일환으로 경도와 내마모성 등 표면성능의 개선을 도모하기 위한 표면강화처리기술을 개발하기 위하여 수행되었다. 낙엽송 마루판의 밑칠을 폴리우레탄 우드실러, 중간칠을 폴리우레탄 샌딩실러도료로 도장한 다음, 마감칠로써 자외선 (UV) 경화형 에폭시아크릴레이트수지도료와 우레탄아크릴레이트수지도료를 이용한 표면강화처리에 의해 경도, 내마모성, 부착성, 내충격성이 향상되었다. 이 처리에 의해 브리넬경도가 1.75에서 2.25~2.27로 개선되어 2.38의 참나무재와 유사한 경도치를 나타내었으며, 약 2배의 내마모성 증대효과가 나타났다. 외부충격에 의한 도막의 갈라짐은 거의 발생하지 않았으며, 에폭시아크릴레이트가 우레탄아크릴레이트에 비해 충격에 의한 크랙의 발생율이 적었다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.1-8
• /
• 2008

This study was performed to evaluate the burning characteristics of wood-based materials and the effect of surface treatment of fire retardant using cone calorimeter. Four types of wood-based materials, such as Plywood, Oriented Strand Board (OSB), Particle Board (PB) and Medium Density Fiberboard (MDF), were tested at a constant heat flux of $50kW/m^2$ to investigate the time to ignition, mass loss rate, heat release rate, effective heat of combustion, etc. In addition, each type of wood-based material was tested at the same heat flux after fire retardant treatment on the surface to evaluate the effect of this treatment on the burning characteristics. The surface treatment of fire retardant, by the amount of $110g/m^2$, delayed the time to ignition almost twice. However, it was indicated that heat release rate, mass loss rate, and effective heat of combustion were not significantly affected by fire retardants treatment for all types of wood-based materials.

• 한국가구학회지
• /
• 제10권1호
• /
• pp.23-32
• /
• 1999

The ultrastructural characteristics of shear fracture surfaces of laminated wood prepared from major four Korea wood specimens were examined. Commercial urea and urethan resin were used as adhesives for laminated woods of both homospecies and heterospecies. The morphology of fracture surface was observed using an optical microscopy and scanning electron microscopy. Three anatomical failure types were recognized : intercell failure, intrawall failure and transwall failure. In dry specimen, failure occurred mainly in woods. Laminated woods of softwoods showed mostly intrawall failure and transwall failure of tracheids, and them of hardwoods indicated mainly intrawall failure and interwall failure. Laminated woods prepared with urethan resin showed coarse fracture surface, on the other hand, those prepared with an urea formaldehyde resin had clean surface. In wet specimen, failure occurred dominantly in glue line. Intrawall failure and flags were characterized in laminated wood prepared with urethan resin. In heterospecies laminated woods, failure was occurred mainly in softwood. Consequently, fracture morphology of laminated wood may be influenced by adhesives, moisture content, species and anatomical characteristics.