• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.58-65
• /
• 2002

This research was carried out to develop field treatment techniques of thinned small diameter softwood logs and less utilized hardwood logs using sap displacement method. In this paper, we report the feasibility of using transpiration method and butt-end method for the treatment of three softwood species and three hardwood species with preservatives, fire-retardant chemicals, and dimensional stabilizer. Butt-end method was effective as a field treatment technique compared to transpiration method when considered the treatability, easiness of treatment, productivity of treated wood, and environmental aspects related to chemical treatment, regardless of the combination of wood species and chemicals.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.810-817
• /
• 2015

This study was conducted to evaluate the pressure treatment characteristics of yellow poplar skin timber with ACQ-2, CUAZ-3, and CuHDO-1. The effect of moisture content (MC) on treatability was investigated, and fixation characteristics of copper-based preservatives were also evaluated. Sapwood of yellow poplar, which was dried below 50 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring retention gradient in yellow poplar sapwood, it was confirmed that minimum requirement of preservative retention for the hazard class H3 was achieved in the assay zone from the surface to 15 mm-depth when the specimens were dried below 30 percent MC. Yellow poplar heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. The fixation rate of copper was much faster under drying condition compared with nondrying condition; more than 90% of copper were fixed in 3 weeks at $21^{\circ}C$ under drying conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.33-38
• /
• 1995

The rates of fixation of CCA-Type B and CCFZ in blocks of radiata pine sapwood were compared at various temperatures and conditioning methods (drying and nondrying conditioning). Also the time required to proper fixation of preservative components in the treated wood was estimated. Fixation was monitored by the rates of depletion of free hexavalent chromium in the cell lumens in the teated blocks. The rate of preservative fixation in wood was highly temperature dependent. The fixation rate was considerably accelerated by means of heating and complete fixation of hexavalent chromium was achieved within about 12 hours by heating at $60^{\circ}C$. The moisture content of treated wood during fixation apparently played an important role in the fixation process. The fixation rate of treated wood conditioned in nondrying conditions was much more faster than that of treated wood conditioned in drying conditions. particularly when the moisture content of treated wood was below fiber saturation point. Time required to full fixation could be predicted successfully using the fixation temperatures applied since the correlation between the fixation temperature and the fixation time was excellent. regardless of conditioning methods.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.46-47
• /
• 1982

1. The physical and anatomical properties investigated in this study are the ones, which may give more effect on absorption of preservatives, such as variation of annual ring, specific gravity, shrinkage, E.M.C. of desorption and adsorption at 70 percent relative humidity condition, general and minute properties of wood. 2. On this study, the positive effects of wood structure, in particular, the appearances of tyloses in vessel element upon the absorption of creosote were observed. 3. Thirteen percent sodium chloride solution treatment and boiling hot water treatment have shown poor results to improve the preservative absorption characteristics of tested species however, some slight difference between treated and control could be seen. (see Tables 6 and 7).

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.66-72
• /
• 1995

The rate of fixation of the components were evaluated in CCA-Type B and CCFZ-treated radiata pine sapwood by quantitative analysis of solution expressed from the treated wood. The leaching characteristics of radiata pine blocks treated with CCA-Type B and CCFZ were also evaluated by the AWPA standard leaching test. Both fixation and leaching charactersistics of CCA-Type B were compared with CCA-Type C treated wood samples. The rate of CCA-Type B fixation was a little faster than that of CCFZ. However, significant amounts of arsenic was unfixed in the CCA-Type B treated samples and consequently leached. These significant quantities of arsenic liberated from the CCA-Type B treated wood during service may pose some environmental concerns. Arsenic was no longer detectable from CCA-Type C treated samples when fixation was complete, even though the fixation of CCA-Type C was slower in some degree than CCA-Type B. In summary, it could be said that CCFZ was much safer preservative than CCA-Type B by the criterion based on the relative hazard assessed by absolute amount of unfixed element present in the treated wood. Also the decision that CCA preservative has to move from Type B to Type C should be made sooner or later for continuous use of CCA preservative in the future.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.231-236
• /
• 2011

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.4
• /
• pp.7-28
• /
• 1993

본 총설에서는 새로운 방부제와 방부처리 기술의 현재 발전 동향을 요약, 보고한다. 많은 새로운 방부제들이 약제의 독성 측면에서 환경적인 충격을 완화시킬 수 있는 잠재성을 가지고 있지만, 방부제로서 상업화되기 위해서는 이러한 약제들은 약제의 효능과 환경 안전성 간의 몇 가지 상호 조정 관계가 반드시 해결되어야 한다. Ammoniacal copper 계통의 방부제들이 지접부 사용에 적합한 새로운 수용성 방부제들의 주종을 이루고 있으며, 기존의 유용성 방부제들을 물에 용해한 emulsion 형태도 지접부 사용의 가능성을 보여 준다. 새로운 유용성 방부제 중에서 copper naphthenate, substituted isothiazolones, chlorothalonil, oxine copper가 지접부 사용을 위한 최상의 후보로 평가되고 있다. 유용성 방부제를 emulsion 형태로 사용하는 것은 유용성 방부제에 사용되는 석유 계통 용제의 소비를 감소시키기 때문에 중대한 의미를 가진다. 방부제들의 효능을 개선하고 강화시키기 위해 사용되는 첨가제들도 본 총설에서 거론된다. 재질개량을 위해 사용되는 비통상적인 방법(nonconventional system)들도 생물학적 열화 및 기상열화에 대한 저항성을 부여하여 목재의 사용수명을 증가시킨다. 전처리 공정에서 침상 자상처리(Needle incising)와 레이져 자상처리는 난주입 수종의 처리도를 개선시킬 수 있는 잠재성을 가지고 있다. 처리기술에 있어서 여러 가지 혁신적인 변화들은 기존의 처리 schedule을 조성함에 그 기본을 두고 있다. 난주입 수종의 처리도 개선은 pulsation법이나 고압 약제 분사법 (high energy liquid jets) 같은 고압을 적용하는 처리법에 의해서 달성된다. 미래의 처리공장들은 방부제를 기체상태로 또는 물질의 임계점 이상에서 방부제를 처리할 수도 있다. 이러한 새로운 접근은 외관이 깨끗하고, 처리도도 매우 양호한 처리재를 생산하는데 일조하리라 기대한다. 환경에 대한 대중적인 지대한 관심은 앞으로 목재 방부산업에 큰 영향을 미칠 것으로 보인다. 결과적으로 방부제의 처리목재내 가속 정착에 관한 연구에 상당한 노력이 투자될 것이다. 처리 후 가공에 관한 다른 주요한 연구는 방부제 처리 후 실시되는 재건조가 처리재의 역학적 성질에 미치는 영향에 대한 것이다.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.804-809
• /
• 2015

Since Korea is home to Reticulitermes speratus, a kind of subterranean termites that prefer dark and humid conditions, there have been increasing damages to wooden structures by termites. One noticeable attribute of Korean subterranean termites is that they prefer than Pinus densiflora, the major construction material for Korean traditional houses. And because wide varieties of termites are distributed all over the world, it is not so easy to choose appropriate control methods depending on specific areas. This necessitates careful applications of the following control methods depending on the kinds of termites: fumigation treatment, soil termiticide, preservatives and insect treatment, termite colony elimination system, chemical treatment, and other physical and biological treatment methods. The purpose of this study is to investigate the control effects of environmentally-friendly Alkaline copper quaternary (ACQ), Copper Azole (CuAZ) and Micronized copper quarter (MCQ) on the termites contributing to the damage of wooden structures. It was found in this study that wood with preservative treatment produced a significantly higher termicidal efficacy than untreated wood.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.323-337
• /
• 2018

Merkusii pine wood (Pinus merkusii) was extensively planted throughout Indonesia, where it is only indigenous in northern Sumatera, by the Dutch during colonial times. The demand for this wood species, especially in the domestic market, has increased notably, despite its limited durability regarding decay resistance. The purpose of this study was to investigate the occurrence of juvenile and mature wood on merkusii pine and to analyze its radial features from pith to bark based on density, shrinkage, static bending in modulus of rupture and modulus of elasticity, fiber length, microfibril angle, and durability. A segmented modeling approach was used to find the juvenile-mature transition. The graveyard test was performed to characterize the termite resistance from pith to bark of merkusii pine. The maturations were estimated to start at radial increments of 15 cm from the pith by fiber length and of 12 cm from the pith by microfibril angle. The projected figures for the proportion of juvenile wood at breast height were around 65%. The results also indicate that the pine wood was $0.52g/cm^3$ in density, 1.45 in coefficient of anisotropy, which indicates its good stability, 7597 MPa in modulus of elasticity, and 63 MPa in modulus of rupture. Natural durability against subterranean termite of the merkusii pine wood was rated to be grade 4 to 0 from pith to bark. However, after being treated by Entiblu and Enborer preservatives, its rating increased to grade 10 to 9.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.579-586
• /
• 2010

This study was carried out to evaluate the antifungal and antioxidative activities of ethanol extracts from Magnoliaceae to investigate the possibility for the natural fungicides and food preservatives. The antifungal activities of ethanol extracts were evaluated as a hyphal growth inhibition rate using four plant pathogenic and five wood rot fungi. The high inhibition activity on the growth of fungi was shown in bark of Magnolia obovata that indicated more than 50% hyphal growth inhibition rate except Trametes versicolor, one of the white rot fungi. The antifungal activity was the highest in the ethanol extracts from M. obovata and the following was in order of M. kobus and M. sieboldii. The extract from bark in M. obovata showed higher antifungal activity than that from wood in the same species. Especially, the extracts from flower of M. denudata and M. liliflora indicated the high antifungal activities, while the other portions of same plants showed the low activities. On the other hand, a free radical scavenging method was adopted with 1,1-diphenyl-2-picrylhydrohydrazyl (DPPH) in order to test the antioxidative activities of ethanol extracts. The free radical scavenging activity was very high in the extracts from branch of Schizandra nigra and Kadsura japonica that showed more than 90% at the concentration of 100 ${\mu}g/m{\ell}$. It also turned out that the antioxidative activity of branch of S. nigra and K. japonica was similar to ${\alpha}$-tocopherol and butylated hydroxytoluene, one of the effective synthetic antioxidants. From these results, it can be suggested that the branches of S. nigra and K. japonica have the positive antioxidative activities and can be applied for the food preservatives and cosmetic ingredient.