• Journal of the Korean housing association
• /
• v.6 no.2
• /
• pp.181-189
• /
• 1995

It is thought as more important for us to understand foreign countrie's culture in the modern society. because the world is becoming closer day by day thiough the develepment of communication and mass-media. Cross-cultural study could play a role to give an opportunity for people to understand foreign countrie’s culture easily.In this respect, this study was planned to find out similarity and difference between Danish and Korean folk tables made and used before the 20th century during the 18th-l9th century as a part of the comparative study of folk furniture between the two countries. It would be very interesting if we could find something valuable between Danish and Korean folk furniture. because they are located very far away each other geographically with less cultural communication before.There were more differences than similarity between the folk tables of the two countries and major findings were as followings : Firstly, there were many kinds of space-saving tables in Denmark. whereas only a few kinds of tables which could be removed easily after their usage were found in KoreaSecondly, Banish folk tables were more emphasized on the function rather than decoration. Whereas Korean folk tables were smaller lower and more decorative than Danish ones to fit their life-style of sitting on the floor.Thirdly, many Danish folk tables were made of bare wood. while Korean ones were finished by transparent lacquer or vegetable oil. Stone tops if tables were rare in both countries. Lastly. there were common factors in the design of legs of folk tables in both countries. It was interesting that animal legs such as deg tiger cat. lion, and eagle were used for design motif of the table legs. But trestle leg, cross leg and gate leg were not found in Korean folk tables. As a conclusion, throughout this study, it became obvious that life-style was one of the most important factor influencing on the design of furniture.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.21-32
• /
• 2011

This research is intended to study literatures relating to western rocking chairs style in early 20th century in order to provide basic data of designs for rockers of today in Korea and investigate characteristics of rocking chair from academic, formative and pragmatic perspectives. During the first half of 20th century, western rocking chairs (1925~1945) embodied actively the simple functionalism concept that furniture design must follow functionality considerations. Therefore, bare wood rocking chairs were without any surface decoration and tubular steel frame rocking chairs often included black leather upholstery in a bold attempt to express exposed structure. And the fact that tubular steel produced such lightweight furniture was crucial importance. Many Modernist designer created curvaceous lines of new pattern changes in their furniture. The structure of Modern rocking chair became all-important, for stylistic as well as functional reasons. Designers equated exposed structure of tubular steel and wooden frame with integrity and rationality and create an equalitarian style of design. Especially, designers in the early 20th century did use various brilliantly colored upholstery and wooden frame with simple forms of modern characteristics.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.245-251
• /
• 2019

In this paper, conservation treatment processes for the wooden furniture in the Presidential Archives are introduced. Conservation treatment strategies for modern wooden cultural heritage have been increasingly studied. The current study uses materials similar to those used by the existing conservation treatment method. Material analysis showed that the chair(Lee136-2) and desk(Yun37) in the Presidential Archives are made of Dipterocarpaceae, and both are coated with two layers of varnishing. FT-IR analysis showed that the varnish has a similar spectrum to that of a nitrocellulose-based lacquer(Lee136-2) and top coat(Yun37) and confirmed that a synthetic material was used. Pollutants had adhered to the surface of the wooden furniture and it was also in structurally unstable condition because of cracks and damage to the varnish and wood. Therefore, a conservation treatment was carried out to restore the damaged areas to their original appearance using similar kinds of materials, based on data obtained by materials analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.3-15
• /
• 1975

How to stabilize wood against shrinking and swelling in variable atmospheric moisture conditions is important to the wood-using industry and a challenge to research. Polyethylene glycol stabilize wood by bulking the fiber. PEG also serve as a chemical seasoning agent, suppress decay in high concentrations, and have slight effect on physical properties, gluing or finishing. The study designed to determine the effect of PEG-400 on the dimensional stabilization of local hardwoods for wood carvings that could supply a greatly expanding tourist trade and making curved furniture parts, lamp stands and other decorative objects, and possible gunstock. The species examined were 6 species, Seo-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acer mono), Karae-Namoo (Juglans mandshurica), Jolcham-Namoo (Quercusserrata) and Sanbud-Namoo (Prunus sargentii), used as block of 5cm thick radially to the grain, 7cm wide tangentially, and 70cm long parallel to the wood grain. All these test piecies were conditioned above the fiber saturation point before impregnation. The stabilization effects were determined for PEG-400 treated woods in a 50 percent solution for 20 days. The following conclusions were obtained. PEG retentions increased with treating time. It was more effective to treat at 60$^{\circ}C$ than at room temperature. In degree of PEG-400 impregnation on species, Cheungcheung-Namoo havinglow specific gravity had the highest retentions, 68.77% but the lowest, 56.33% was shown in Jolcham-Namoo with high specific gravity. Specific gravity of treated wood increased considerably with effectiveness of polymer loading. The increases in specific gravity were 5.36 to 13.16 percent. The highest was Jolcham-Namoo, the lowest Karae-Namoo. On the dimensional stability, a 40 percent of effectiveness of polymer loading was just as effective as 60 percent in reduction in water absorptivity (RWA), antishrinkage efficiency (ASE) and antiswelling efficiency (AE), and from over 60 percent they increased more rapidly. Also species response varied considerably. ASE was 30.12 to 69.97 percent tangentially and 27.86 to 56.37 percent radially, AE 34.06 to 73.76 percent tangentially and 30.11 to 70.12 percent radially, and RWA 42.31 to 65.32 percent. No differences in volume swelling among the 6 species were observed. Its values were ranged from 14.98 to 19.55 percent and also increased with PEG retentions. On the mechanical properties, the strengths very much decreased with PEG-400 loadings as shown in Figure 12; that were 11.41 to 22.90 percent in compression, 21.61 to 34.35 percent in bending and 22.83 to 36.83 percent in tensile strength. PEG retention in cell wall was less than 1 percent and the most of PEG were immersed in cell lumen. Except for Korae-Namoo, effectivenesses of polymer loading were as much high as 61.58 to 75.02 percent. This is believed to be due to the effect of PEG-400 on excellant dimensional stability of treated woods.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.333-343
• /
• 2011

The yellow poplar is an appropriate species for the age of low carbon green growth, because its absorption rates of ozone is greatly excellent, and also the absorption rates of carbon dioxide causing climate changes is very remarkable. The yellow poplar, which is a kind of rapid growth tree, shows a lack of performance as a structural member, however, it is suitable to use a variety of purposes like furniture materials, interior materials, plywood materials, and so on. In this study, the structural size skin-timbers were made by using the yellow poplar, and the compressive capacity was evaluated, also the numerical model was developed for the various uses. The rectangular shape skin-timber presented a good performance by showing 56.3% residual strength about the solid material. In case of the cylinder shape skin-timber showed a possibility to use diversely as a furniture material, as well as a structural uses, because almost 50% compressive capacity of material even though its residual area rates was 25%. Both rectangular shape and the cylinder shape represented that 'Brooming or end rolling' were the major failure mode, and partly splitting failure mode. The compressive capacity of the rectangular shape which residual area rates was large was higher than the cylinder shape, but it did not show statistical significance about the compressive capacity between them. Thus, it will be possible to use them mixed for a convenience of users. The result of the numerical analysis model was quite similar to actual test of the compressive capacity. Therefore, the yellow poplar can be utilized in the development of various uses by applying numerical analysis model about a variety of shapes and dimensions.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.300-305
• /
• 2005

Tree-ring chronologies can be used to date historical buildings and furniture by matching them with the chronologies of living trees or previously dated samples. Tree-ring dating gives a calender year to each tree ring and produces the felling dates of logs or woods which had been used for buildings. In Korea, several chronologies of Japanese red pine(Pinus densiflora Sieb. et Zucc.,'sonamu' in Korean), a major species for the wooden building materials, have been developed and used for dating historical buildings. Daejojeon of Changduck Palace is known to be reconstructed in A.D. 1920 after burned-out in A.D. 1917. Instead of new woods, Daejojeon was reconstructed by reusing the woods of Kyotaejeon in Kyungbok Palace. We sampled total of 26 wood samples which were replaced during the repair process of Daejojeon in 1995. Felling dates of the samples were determined by the dendrochronological crossdating method. Crossdating method employs graphic comparison of the master patterns (ring-width plots of living trees or known dates) with those of the sample chronologies of unknown dates. The cutting dates of Daejojeon woods were divided in two groups. One was the late 1860s and the other 1880s. The results confirmed that Kyotaejeon was reconstruced first in the A.D 1860s and then in late 1880s after burning out in 1876.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.416-424
• /
• 2018

Objective: The objective of this study was to estimate the numbers of employees occupationally exposed to noise according to their industry and size. Methods: A Delphi panel consisting of 15 occupational health experts estimated the exposure prevalence of noise in workplace. Data on Industrial Accident Compensation Insurance provided from Occupational Safety and Health Research Institute were combined to produce the exposure population. Results: In Korea, 16.0% of employees, 2,539,890 out of 15,838,926, was estimated to exposed to noise occupationally. The rate was 32.7% and 10.3% in manufacturing sector and non-manufacturing sector, respectively. The highest rate, 52.5%, was found in manufacturing industries of wood and of products of wood and cork(except furniture) and of other transport equipment. Sorted by their size of business, the rate was higher as the number of employee was larger in manufacturing sector. Conclusions: Compared to the same rate estimated in the US, 17.2%, the result of this study seems to be in a resonable range.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.234-240
• /
• 2022

Use of processed timber can help reduce environmental damage and the economic burden of resources (important problems with use of raw timber) and can meet the needs of various fields where the sensibility of raw timber is required. Veneer wood is positioned as a high-value-added product due to its luxury and beauty, and it is used in various fields as a building-related material, such as interior decoration, furniture, flooring, building interior materials, and lumber. Dyeing is necessary to enhance the aesthetic appearance of this pattern and to expand its use. Therefore, in this study, we compared and analyzed the dye ability of oak-patterned materials with reactive dyes, and evaluated their performance as interior materials. As a result, the oak pattern was dyed with 9 kinds of reactive dyes and a comparative analysis was performed. The most suitable conditions are 50℃, 2 hours, and 0.5% o.w.f. In addition, evaluating resilience to daylight, resilience to rubbing, fire resistance, and flame retardance, yielded results suitable for use as an interior material. In this study, the dyeability of veneer dyed under various conditions using reactive dyes was compared and analyzed the performance as an interior material was evaluated.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.70-78
• /
• 2007

This study explored the efficient dyeing method of aged chestnut wood using the natural dyes extracted from Gardenia jasminoides for, grandiflora, Carthamus tinctorius L., Rhus javanica L., Lithospermum erythrorhizon S. et Z., Caesalpinia sappan L. and Castanea crenata S. et Z.. The color variation of the dyed chestnut woods was also quantitatively evaluated. The wood specimens revealed abundant colors through different dyeing conditions such as dyeing temperature, dye pH, soaking time, and brushing frequency. The chroma and stain concentration of colored woods were calculated with $L^*$, $a^*$ and $b^*$ in order to make color tone measurement. Brushing treatment for colored wood was confirmed as a more economical dyeing method than soaking treatment requiring more time when natural dyeing was done. Furthermore, the desirable tone and shade of color was easily obtained by repetitive brushing treatment using low color tone. During natural dyeing, good color expression was made with high temperature and acidic condition of a dyeing liquor.

• Journal of Forest and Environmental Science
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2013

Acacia mangium is an evergreen fast-growing tropical tree, which can grow up to 30 m tall and 50 cm thick, under favorable conditions. It is a low-elevation species associated with rain forest margins and disturbed, well-drained acid soils. It is native to Papua, Western Irian Jaya and the Maluku islands in Indonesia, Papua New Guinea and north-eastern Queensland in Australia. Due to its rapid growth and tolerance of very poor soils, A. mangium was introduced into some Asian, African and western hemisphere countries where it is used as a plantation tree. A. mangium has good quality wood traits, such as a comparatively low proportion of parenchymatous cells and vessels, white and hard wood, and high calorific value. Therefore, it is useful for a variety of purposes, such as furniture, cabinets, turnery, floors, particleboard, plywood, veneer, fence posts, firewood, and charcoal. It is also being used in pulp and paper making because it has good pulp traits, with high yields of pulp, quality of kraft, and produces paper with good optical, physical and surface properties. Because there are significant provenance differences in growth rate, stem straightness, heartwood formation and frequency of multiple leaders, the productivity and quality also varies depending upon environmental conditions, so genetic improvement programmes have been undertaken in countries like Australia, India, Indonesia, Malaysia, the Philippines, Taiwan and Thailand. The programme includes provenance identifications and testing, plus tree selection and clonal multiplication, establishment of seed orchards and hybridization. The phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting, wood properties and utilization have been discussed in this paper.