• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.130-139
• /
• 2013

The purpose of this study is to analyze the characteristics of Korean sofa design in 2013 and understand the change of it in comparison with the characteristics of sofa in 2001. For the sake of it, this study analyzed the styles, forms, materials, colors and composition of 220 sofas posted on 7 main furniture companies' internet homepage of Korea, and used the results of the previous study for the materials in 2001. As the results of analysis, the style of furniture was almost modern and there was much of lineal in the form of sofa, rather than curved. The percentage of using leather for main material of sofa was greatly increased compared with 2001. In case of minor material, there was difference in each company in percentage of using wood and metal. The use of brown color was greatly increased compared with 2001, and the diversification of color use was reduced. The percentage of using a single color gets increased compared with 2001, but the cases of strong contrast were more than that of weak contrast. The percentage of sofa for 3 people gets lowered compared with 2001, and the case of sofa for 4 people gets greatly increased. In case of auxiliary component, the use of couch and stool, which were almost not used in 2001, gets more increased than sofa for single, with many cases of using the corner, though small. In conclusion, the characteristics of Korean sofa design are diversification of the sofa configuration, the tendency of high-quality sofa, and simplification and concentration of the sofa design.

• Journal of the Korea Furniture Society
• /
• v.16 no.2 s.30
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.207-223
• /
• 2017

Jeonju-Jang is the wood furniture that was made in Chonbuk Jeonju province during the Joseon Dynasty, and was used by middle-upper social classes. It has value as a local cultural heritage because it has unique characteristics in terms of the shape of the furniture, the metal ornament and various functions are integrated in accordance with user's requirements. Therefore, the purpose of this study is to define the structural characteristics of the Jeonju-Jang through case studies of 16 existing artifacts in order to preserve and inherit the value as local cultural resources. The conclusion is as follows. First, Jeonju-Jang in the late period of Joseon Dynasty that is made up of one board to the bottom with the binding of the board. and the front wall, the Juibyuckkan and the Meoruemkan are omitted or made small, so the structure of the surface is simple. There are three or four drawers under the Cheon pan(top plate). There are drawers and shelf inside the hinged door. In the case of a two-layer type, there is a Gaegumeong type door which has half of one side hinged. Second, Jeonju-Jang of the Japanese Ruling Era had a Juibyuckkan by frame binding and an increase in the number of Meoruemkan. and it had independent legs. The Cheon-pan(top plate) was more left and right than both sides. Third, in the late Joseon Dynasty period as a feature of the metal ornaments, cast iron and yellow brass were used as materials. In the Japanese Ruling Era, nickel was mainly used. Various patterns were engraved and the number increased, and it became gorgeous surface as a whole.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.309-317
• /
• 2014

Harvested wood products (HWP) are known as products from the tree such as sawn wood, plywood, particle board, structural lumber, wooden interior material, wooden furniture, and paper products. Because carbon is locked up in the HWP until eventual end-use of HWP, HWP played a role as the carbon storage which has the effect of stabilizing the concentration of carbon dioxide in the atmosphere. For these reasons, the suggestion that it must admit the carbon storage effect of HWP has been constantly raised. In 2011, the 17th session of the Conference of the Parties (COP) to the United Nations Framework Convention on Climate Change (UNFCCC) which was held in Durban, South Africa, assigned "Production Approach" which targets only the HWP producted by using round wood of domestic forestry as a official method for carbon accounting. Therefore, it is necessary that each country has to determine the half-life of wood in order to correspond to the discussions and negotiations between countries in the future and to develop an inventory of product-specific domestic wood. In this study, some countries' examples of the methods and conditions for determining half-life of HWP were investigated, and it was tried to derive the factor and methodology to determine half-life span of domestic HWP appropriately.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.539-550
• /
• 2016

The objective of this research was to evaluate physical and mechanical properties of three species of Styrax woods from North Tapanuli in Indonesia. The woods were more than 15 years old. Physical properties such as specific gravity, green moisture content, and volume shrinkage were determined by the procedures based on BS-373 standard for small clear specimen. Furthermore, mechanical properties, including modulus of rupture, modulus of elasticity, compression parallel to grain and hardness were also tested according to the standard. Along the stem direction, the edge section had better properties compared with those near the pith section. And the base section had also better properties than upper section. Based on the specific gravity, all of the Styrax woods in this research were classified into III-IV strength classes. A good dimensional stability was demonstrated by the value of the tangential and radial ratio which reached one. With the consideration of the mechanical properties, Styrax woods were suitable use for raw materials of light construction, furniture and handy craft.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.383-392
• /
• 2024

Laminated bamboo is an engineered bamboo technology to maintain its mechanical durability for both construction and furniture materials. This study was conducted to assess the properties of laminated bamboo made from Betung bamboo at different culm positions and laminate orientations. The materials used in this study were 4-year Betung bamboo (Dendrocalamus asper) obtained from a community forest in Yogyakarta and polyvinyl acetate resin as adhesive. Two factors were applied for this study, i.e., culm position (lower, middle, and upper) and laminate orientations (vertical and horizontal direction). To examine the mechanical properties, a static bending test and the hardness test were performed in accordance with ASTM D1037-99. Moisture content and density were determined in accordance with BS 373-1957. The results indicated that there was no interaction between the culm position and laminate orientation on the moisture content, density, static bending properties and hardness. The culm position affected the static bending and hardness, with the higher position of the culm resulting a greater strength. The laminate orientation also affected the strength of laminated bamboo, with the vertical direction resulting in higher strength than the horizontal.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.1-12
• /
• 1999

Of the vast number of plant taxa in the world, the wood is one of the most useful resources. It is important to identify the fibers of wood and pulp for the plant taxonomy and for the uses, but we do not have enough information on them, on them, especially for the computerizd data. The fiber identification is one of the difficult tasks. In addition to the plant taxonomy and the fiber-using industries, such identification is also important in many other fields, including education. document examiners, etc. For these purpose, the fibers should be exactly distinguished. The TISS system I have programed to identify various woods would also be useful in the identification of fibers by the genus and species in the features of unknown samples and in searching the features of a species based on its scientific name. Such searching programs are being developed in many other countries with a view to searching for the species name by using the features of the cells of the woody materials. With the survey of all the available literature, the features of the fibers of 124 species both of softwood and hardwood were examined under the electron and optical microscopies. Each species were coded and carded by the feature, and the databases were built. The microscopic were inputted into a personal computer program called and by a slide film scanner. The new computer program called TISS 2 was developed using C computer language. Korean language fonts were added to the TISS 2. The TISS 2 can be in adding and searching a image of fiber features both of a known fiber and an unknown fiber. The databases were corded for the DELTA system with was developed by Dallwitz and Paine in Australia, 1986.

• Journal of the Korea Furniture Society
• /
• v.18 no.4
• /
• pp.317-323
• /
• 2007

Almost all the people, particularly the rural people are directly dependent on the continued productivity of natural resources, like water, soils, forests and fisheries. But the overuse by the extremely high population pressures has degraded the natural resources into severe widespread deforestation. The degradation of natural resources, particularly the plant resources has been a great concern for socio-economic and sustainable development of the country. The Forests in Bangladesh have been depleted and degraded in volume, area, and quantity, thus requiring urgent forest protection by identifying the causes of forest loss. There are so many causes of deforestation and loss of genetic resources such as; the timber industry, which, legal or not, are cutting too many trees; indigenous forest dwellers, having their own types of problems; migrants, who, because of problems in their places of origin, have decided to move to the forests and the government through its Forest Department which is not able or willing to implement suitable policies to regulate the cutting trees and to prevent illegal cutting. Because it is a time consuming task to mitigate the first and second sets of factors, we recommend involving forest dwellers in forestry practices as much as possible and taking necessary steps to alleviate the third and fourth sets and thereby reduce the rate of forest depletion. Accordingly, a number of strategies that should be adopted to halt the loss of remaining forest cover are discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.7-14
• /
• 1996

이 연구(硏究)는 미국(美國) 남부(南部)의 9개 주(州)에 소재하고 있는 가구공장(家具工場)에 대한 설문조사(設問調査)를 통해 산업구조(産業構造)와 마케팅 전략을 조사(調査) 하였다. 이번 조사 결과를 요약하면 1. 가구공장(家具工場)이 사용하는 원자재(原資材)는 red oak, pine, poplar, maple 등으로 한국 가구공장(家具工場)이 원자재(原資材)의 95% 이상(以上)을 남양재(南洋材)에 의존하고 있는 것과 뚜렷한 차이를 보였다. 2. 가구공장(家具工場)의 68.8%는 주요시장(主要市場)을 자기 주내(州內)에 가지고 있고, 28.8%가 주(州) 밖에 그리고 조사공장(祖師工場)의 2.5%만이 수출(輸出)했다. 아울러 수출(輸出)이나 자기 주외(州外)에 시장(市場)을 가지고 있을 수록 공장규모(工場規模)가 컸다. 3. 주요시장(主要市場)까지의 거리는 50%가 160km 이내(以內)였는데 이것은 활엽수 제재목(製材木) 공장(工場)의 30%가 800km 밖에까지 시장(市場)을 가지고 있는 것에 비해 매우 좁은 시장(市場)을 형성하고 있는 것으로 나타났다. 4. 제품(製品)의 유통(流通)은 직접 소비자(消費者)에게 출하(出荷)하는 것이 3/4로 압도적이었지만, 중간유통기관에 출하(出荷)하는 곳일수록 공장규모(工場規模)도 컸다. 5. 가구산업(家具産業)의 성공에 기여(寄與)하는 요인(要因)으로는 제품품질(製品品質)과 장기적(長期的)인 소비자(消費者)와의 관계(關係) 증진(增進)을 가장 중요한 요인으로 지적하였고, 그 다음으로 기업에 대한 평판(評判)과 높은 소비자(消費者) 서비스를 지적하였다. 반면에 가구산업발전(家具産業發展)의 장애요인(障碍要因)으로는 원자재(原資材)의 품질(品質)과 원료(原料)의 불안정(不安定)한 공급(供給)이 제일 중요하게 인식되어 있었다. 그러나 해외공급자(海外供給者)와의 경쟁(競爭)은 장애요인(障碍要因)으로 거의 인식되고 있지 않았다. 6. 공장(工場)의 확장(擴張)이나 이전(移轉)에 가장 큰 영향을 미치는 요인(要因)으로는 노동력(勞動力) 문제(問題)(생산성(生産性)과 비용(費用))가 가장 중요하게 지적되었고, 그 다음으로 세금구조(稅金構造), 건설비(建設費) 등이 지적되었다.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2001

To investigate weathering and surface characteristics of coating film on lumbers coated with Hwangchil(varnish of Dendropanax morbifera), we carried out to investigate the resistance against discoloration, value of crack and surface characteristics of coating films on seven domestic lumbers and those of four introduced tropical lumbers. There was investigated to evaluate the properties of coating films by the varnish of Dendropanax morbifera. There was insignificant correlations between the hardness and moisture contents of each lumber treated by the varnish. There was no significant correlations between the thickness of coating film and the hardness, either. Although we investigated 11 wood species, we found only three species as resistance wood species against discoloration; Diospysos spp., Abies holophylla and Ulmus davidiana. The crack of coaing films was the largest on Zelkova serrata followed by Juglans sinensis, Cercidiphum japonicum, Tectona grands, Ulmus davidiana, Guibourtia tessmannii, Diospysos spp. and Dalbergia latifolia. However, there was no crack of coating films on the lumbers of Juniperus rigida, Prunus serrulata var. spontanea and Abies holophylla. The crack of coating film showed positive correlations with the thickness of coating film and hardness. The surface characteristics of the coating films evaluated on the basis of $R_{a}$ values indicated the lumbers of Ulmus davidiana($0.14{\;}{\mu}m$), Juniperus rigida($0.1 5{\;}{\mu}m$), Guibourtia tessmannii($0.19{\;}{\mu}m$), Dalvergia latifolia($0.20{\;}{\mu}m$) and Diospysos spp.($0.20{\;}{\mu}m$), Cercidiphum japonicum($0.24{\;}{\mu}m$) as good species while there was insignificant differences between softwoods and hardwoods. Tectona grands, Prunus serrulata var. spontanea and Abies holophylla showed rough surface with $1.53~2.63{\;}{\mu}m$ of $R_a$ values. The four kinds of rough indices($R_a,{\;}R_z,{\;}R_{max}{\;}and{\;}R_q$) showed very low correlations with moisture contents with the correlation coefficients. The $R_a{\;}and{\;}R_{max}$ also showed slight relationship with hardness.