• Journal of the Korea Furniture Society
• /
• v.24 no.1
• /
• pp.104-112
• /
• 2013

Monitoring for moisture contents of wooden post member of Un-bong confucian school was performed in 6 months and analyzed to conserve scientifically the wooden culture building and open for common people. In inner post member of the building, variation of moisture contents was very small and upper part had relatively higher moisture contents. In outer post member, moisture contents were changed according to the weather conditions and was relatively high in bottom and upper part. Southern post has lower moisture content than eastern. These results were related to air ventilation in interior, depth of eaves and orientation of the building. In the design, construction and maintenance of wooden building, characteristics of wood should be considered like moisture contents.

• Journal of the Korea Furniture Society
• /
• v.19 no.2
• /
• pp.116-123
• /
• 2008

Kiln schedule development was based on two schedule phases, the first being to determine the maximum safe kiln temperature during the check prone initial stage of drying, with the second stage determining how to accelerate drying once the danger of checking had passed. This was achieved by using 38 mm thick boards which were pre-screened for susceptibility to internal checking, and then drying matched sample boards over a range of kiln temperatures. Research has shown that below 50% MC there is no further risk of internal checking. However, difference in drying rate due to board width and the increased occurrence of wet patches in wide boards means that it is essential to modify the basic schedule according to the maximum board width. A condition of 52/40 $^{\circ}C$ was selected for the checking-free initial kiln drying step and a 5-step kiln-schedule dried the boards from 109% to 8% MC for 72.5 hours without internal checking.

• Journal of the Korea Furniture Society
• /
• v.19 no.2
• /
• pp.130-136
• /
• 2008

The objective of this study was to date coffin woods of a grave of husband and wife, using the tree rings, which were excavated from Hoamdong, Chungju city in the central area of South Korea. The species of coffin woods was Japanese Red Pine (Pinus densiflora S. et Z.), one of the major conifers growing in Korea. The husband coffin was dated as A.D. 1628. Due to the absence of bark in the wife's coffin, the number of sapwood rings was estimated to obtain the cutting date. The cutting date of wife's one was estimated to be A.D. 1651${\pm}$10. The Jeogori Jacket for women, which was found in the husband coffin, indicates that the husband died earlier than the wife, as the tree-ring dates suggested.

• Journal of the Korea Furniture Society
• /
• v.19 no.3
• /
• pp.219-228
• /
• 2008

Kangrung is a royal tomb for King Myoungjong and his wife, Queen Jeongsun. According the record, Myoungjong died on 1567 and was buried in the present location at Gongrungdong, Nowonku, Seoul. During the 2006 repair for the Jeongjagak (memorial hall) and Bigak (tombs' house) of Kangrung, a dendrochronological analysis had been conducted. We took 79 samples, 74 from Jeongjagak and 5 from Bigak, respectively, for dating. There were three major cutting groups, i.e., 1692-1694, 1737, and 1859-1861. The first group was well matched with the date of reconstruction, which was written on the 'Sangryangmun', a formal record about building activities. The tree-ring results confirmed that the present buildings of Jeongjagak and Bigak in Kangrung were reconstructed in 1695. The second and third cutting groups indicated major repairs in Bigak.

• Korean Institute of Interior Design Journal
• /
• no.15
• /
• pp.62-68
• /
• 1998

Children develop in direct relation and response to their physical environment, The purposes of this study were to investigate the current interior design conditions of classrooms in kindergarten and to provide interior planning guidelines for children's behavioral and developmental improvement and better educational environment. Data were collected through interview and questionnaire survey. The sample included 239 teachers who were employed in 23 kindergartens located in Pusan. The data were analyzed by using SPSS-PC. The major findings were as follows; (1) Wood and wallpapers which provide various colors and patterns are recommendable as a classroom finish rather than paint which looks monotonous. (2) Teachers preferred 7 or 8 activity centers in classroom and furniture or partition is the best when dividing space. (3) Classroom should be large enough to locate various types of furniture that designed based on child-size and objects to store. (4) Activity centers should be lit by different types of task lighting such as floor lamp and backer to provide sufficient level of light.

• Journal of the Korea Furniture Society
• /
• v.20 no.3
• /
• pp.198-204
• /
• 2009

Less used small diameter logs of black locust were heated at $250^{\circ}C$ for improving utilization. The volatile compounds emitted by the heated logs were analyzed. Their effect of formaldehyde absorption was evaluated with PB. Ester and acid compounds were dominant in content. Especially, methyl acetate and acetic acid showed the highest contents. The total content of aromatic compounds decreased as heating time increased. Amoung ketone compounds, The contents of 2-propanone, 2-pentanone, 3-petanone, 3-hexanone and cyclopentenone decreased with the increase of heating time, but the others did not. The contents of the chemicals, furfural and 3-pentanol, increased with heating time, while that of 2-methyl butanal decreased. It was hard to say that formaldehyde was absorbed by the heated black locust samples. Some decorative goods were designed with the heated logs.

• Journal of the Korea Furniture Society
• /
• v.28 no.1
• /
• pp.53-59
• /
• 2017

Wooden dowels are commonly used to join the particleboard members together in many types of structures, But little information is available concerning their holding properties in domestic particleboard. This study was performed to determine the withdrawal loads and strengths on the effect of diameter of dowel and hole clearance. The test block was manufactured from 15 mm thick domestic particleboard. The dowel was manufactured 6, 8 and 10 mm diameters from korean castanea, korean pine and tuliptree. Research reported here indicates that withdrawal loads increase, but withdrawal strengths decrease, as the dowel diameter increases. This study also indicates that dowel withholding load and strength for particleboard less decrease than those for domestic wood as a hole clearance decreases.

• Journal of the Korea Furniture Society
• /
• v.23 no.3
• /
• pp.271-289
• /
• 2012

This study analyzes the Western rocking chair style of the middle of the 20th century (1945~1970), and investigates academically characteristics from formative and practical points of view. The purpose of this study is to provide basic information on the design and production of the modern Korean rocking chair. In the 20th century, the production of the Western rocking chair displayed principles of both functionalism and optimism. These rocking chairs are constructed of various industrial materials including reinforced plastics, moulded plywood, aluminium, and steel as well as wood. Furthermore, a rocking chair suitable to the human body is made by industrial growth and innovative fabrication techniques such as designer's plastic from military in the First and Second World Wars. In those days, there are many different types of rocker style - traditional, plastics, structural, moulded plywood & bending, metal tubular, and wire mesh. More specifically, through economic prosperity and plastic development, the rocking chair is able to have light and bright colors, which shows sensible formality of the modern and structure.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.55-60
• /
• 2014

The objective of this study was to date a Buddhist wooden Tablet (No. 271) at Songkwangsa Temple, Suncheon, Korea, using wiggle matching of radiocarbon dates. For wiggle matching, three samples (2nd, 16th and 34~35th rings from inner side) in the pedestal of the Tablet were selected among total of 37 tree rings. Wiggle matching the radiocarbon dates of three samples resulted in A.D. 1660~1679 (95.4% confidence interval) for the outermost ring. This interval suggested the age of this tablet as the late 17th century, which was almost at the same age as other early Buddhist tablets in Korea.

• Journal of the Korea Furniture Society
• /
• v.22 no.2
• /
• pp.118-125
• /
• 2011

These days global warming is the most important problem and the most important factor is high emission of carbon dioxide. The 23% of carbon dioxide emission for building construction must be reduced. Thermal conductivity is the most basic factor that can decrease the energy consumption especially insulation. Therefore, an accurate and continuous thermal conductivity measurement can be a way to save energy. In this paper, there are methods about how to investigate thermal conductivity measurements and comparing two methods which are the Heat Flow Meter 436 and TCi.