• Journal of the Korea Furniture Society
• /
• v.18 no.1
• /
• pp.20-30
• /
• 2007

This experiment was carried out to investigate the effects of number and location of finger joints on the bending strength of glue-laminated lumbers. Urea resin adhesives were used in this experiment and the resin content was 70% for cold pressing. The lamina were edge-jointed and end-jointed. The specimen were composed of one or three layers. The obtained results are summarized as follows; The effects of finger joints on the decrease of bending strength of glue laminated woods were different according to the number and location of finger joints. The decrease of MOR was highest on the middle position of laminated woods. The effects of several arrangements of finger joints on the bending strength of glue laminated woods showed on Figure 7 and 8. The variance of thickness-laminating on the bending strength of glue laminated woods were larger than those of width-laminating.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.460-465
• /
• 2008

When wood is exposed to natural weathering and UV radiation discoloration progresses. The color variation of heat-treated wood was investigated. Four domestic species were selected and heat-treated at $220^{\circ}C$ and naturally weathered for 42 days. Their colors were measured with a portable colorimeter. The color variations were different between species. The Korean red pine specimens were highly discolored by the natural weathering even though they were heat-treated. In contrast to Korean red pine, Korean pine is less discolored. The maximum color difference of larch was lower than Korean red pine. All specimens of birch exceeded the color difference criterion of 15 after 25 hours with the maximum of 28.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.302-308
• /
• 2016

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study the specimens of domestic red and Korean pines are acetylated in liquid phase and their physical properties, such as density, bending strength, anti-hygroscopicity etc., are analyzed. Acetylation increases the average weights and volume of larch specimens by 11.4% and 3.4%, respectively, and their average oven-dry densities are increased by $0.03g/cm^3$. Acetylation does not influence on Modulus of Rupture (MOR) and Modulus of Elasticity (MOE). The average Percentage Reduction in Hygroscopicity (PRH) and average Percentage Reduction in Water soaking (PRW) of larch specimens are respectively 20.2% and 20.8%. Thus it can be concluded that acetylation improves the dimensional stability of larch specimens.

• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.253-262
• /
• 2016

Woodcraft activity is inseparable with our ordinary life and its relevant research should be consistently maintained because it has significant educational value to blossoming students. These days, which interest in woodcraft is rapidly expanding from early childhood to old age, this study was done to provide images to those who work in this field or who have interest. Out of the 43 jewelry and gift boxes used in this study, species of white which has low proportion of packing materials consists of species of Fir (Abies spp), Birch (Betula spp) and Amercia basswood (Tilia americana Linnaeus) and the higher proportion species of Mahogany (Swietenia macrophylla), Bayor (Pteorospermum diversifolium Bl), Snakewood (Piratinera guianensis aubl.) and Bintangor (Calophhyllum spp.) were used in valuable products. It was showed that out of 56 works selected from '400 Wood Boxes', the species of Walnut (Juglans regia), Cherry (Prunus serotina), Wenge (Milletia laurentii De. wild), Ebony (Diospyros spp.), Ash (Fraxinus spp.) and Cocobolo (Dallbergia cultrata Grah.) were frequently used.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.27-37
• /
• 2002

This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.198-204
• /
• 2014

Aggravation of natural environment, improvements in income, internet diffusion, spread of five-day work a week, and population aging seem very different from each other. However they boil down to consumption. These culture patterns are changing into environment-friendly and productive housing culture. In other words, people might tend to have frequent contacts with not only environment-friendly housing in bustling cities but also woods that is environment friendly materials in their leisure time. In the period of people young and old alike are in favor of woodcrafts, this study was conducted for giving information to who speicalized in woodcrafts. Furthermore, the study shows that other countries also added grain and figure to woodcrafts for visually appealing.

• Journal of the Korea Furniture Society
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2003

Wood cell-wall modification with acetic anhydride, lumen filled with styren monomer and methyl methacrylate, and a combination of these two treatments were studied for their effectiveness for dimensional stability. Compared to those of untreated Pinus densiflora Sieb. et Zucc and sole acetylated red pine, The combination of acetylation and impregnation with methy methacrylate greatly reduced water absorption, increased ASE to the best and gave better bending strength and compression strength.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.101-107
• /
• 2006

To know the structural difference between the ray parenchyma and ray tracheid among Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi, an observation was carried out under the FE-SEM. The longest ray parenchyma and ray tracheid were found in Pinus koraiensis species while the shortest ray tracheid and ray parenchyma were found in Pinus densiflora and Larix kaempferi. Larix kaempferi had more than one endwall pit in its ray parenchyma. Pinus densiflora was found highest in the pit aperture diameter in ray tracheid and aperture diameter in the cross-field pit. The pit border width in ray tracheid and lumen diameter of ray parenchyma were found highest in Pinus rigida. The cell wall thickness of ray parenchyma and pit aperture diameter in endwall pit of ray tracheid were found highest in Pinus koraiensis compared to other species.

• Journal of the Korea Furniture Society
• /
• v.18 no.3
• /
• pp.243-247
• /
• 2007

An experiment was conducted to observe the safranine penetration depth in radial directions of Populus tomentiglandulosa. Radial penetration was considered from bark to pith. In radial direction, ray parenchyma and intercellular space were considered for the measurement of safranine penetration depth. It was found that sapwood conducted safranine 24.23% higher in radial direction compared with heartwood. Intercellular space conducted safranine 39.27% higher depth compared with ray parenchyma and the penetration depth was 39.41% higher in sapwood compared to heartwood. During safranine penetration, it formed a curvature in the lumen of ray parenchyma. Initially safranine penetration was found high and decreased gradually.

• Journal of the Korea Furniture Society
• /
• v.19 no.4
• /
• pp.294-299
• /
• 2008

Collapse is an abnormal shrinkage resulting in uneven, rough surfaces and/or warping of sawn timber. The maximum abnormal shrinkages of the oak and persimmon specimens were obtained by the quasi-equilibrium drying and were compared with the other drying methods. The effect of steaming and freezing treatments on the shrinkage of wood was also investigated. The Quasi-equilibrium drying used in this study was proved as a good tool to make the maximum abnormal shrinkage of wood. The maximum abnormal volumetric shrinkage possibly caused by collapse could be 16.3% and 14.3% for the oak and persimmon specimens, respectively. In general the steaming-treated specimens shrank less than the controls for the oak specimens, but did more for the persimmon specimens. The volumetric shrinkages of the freezing-treated specimens were more various between the drying methods than those of the control and steaming-treated specimens.