• Journal of the Korea Furniture Society
• /
• v.18 no.1
• /
• pp.39-46
• /
• 2007

This study was carried out to investigate the wood properties for efficient utilization of warm temperate tree species of Quercus acuta Thunb. grown in Korea. Fundamental wood properties in the anatomical, physical, mechanical and chemical characteristics were examined. Quercus acuta Thunb. is a radial-porous, straight grained and fine textured wood. The heartwood is not clearly distinguished from the sapwood. In physical properties, it has a high oven-dry specific gravity of $0.85{\pm}0.02$, and high shrinkage from green to air-dried condition of $7.05{\pm}0.52%$ in radial and $11.13{\pm}0.48%$ in tangential direction. Mechanical properties determined are strong with the MOR of $1,065{\pm}90kgf/cm^2$, and tensile strength parallel to grain of $1,490{\pm}258kgf/cm^2$ and shear strength of $175{\pm}13kgf/cm^2$. Also, this wood has high extractive contents: 11.11% for cold and 13.51% for hot water.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.47-55
• /
• 2001

Violin bridge blank cut from maple wood with good quality has typical pattern of the radial direction in the side edge with minimal dispersion. This experimental study was designed and carried out to examine the effect of the physical and macroscopical characteristics on the compressive creep of violin bridge blank which had been imported from European manufacturer. This research arose from the idea that the maple solid wood with heterogeneous wood density and ray direction in the side edge would have uneven rheological property of violin bridge blank which is supposed to be pressed by the tension of strings. Experimentally, the compressive creep of bridge blank became smaller with the higher density of imported maple wood and showed clear density-dependence for the duration of load under the string tension of 5 kgf. Every bridge blank showed the behavior of primary creep stage(stress stabilization) having logarithmic regression creep curve with high correlation coefficient under the designed stress level. Even though the relationship between compressive creep and ray direction on the side edge of bridge was not so clear contrary to expectation, we could conclude that wood density and ray direction should be the quality decisive factors affecting the acoustical characteristics and performance of the bridge, the core member of violin-family bow instruments.

• Korea Science and Art Forum
• /
• v.19
• /
• pp.601-612
• /
• 2015

Postmodernism has blurred the line between design and art. We would like to suggest a design case that took diversity in the modern era that harmonizes functionality and shape of the top board of a furniture and trend of the role of furniture and objet into consideration. This study aims to project a new role into space via convergence of objet that has aesthetic function and furniture design that plays practical role in space. Thus, furniture design attempts to combine ceramic and carpentry and demonstrate the value and potential the combination possesses. By creating a distinct design from previous furniture that had visual limitations with ceramic bridge that adopted existing piling method in ceramic design, we expect a fresh blend of furniture and space that encompasses a different sensation from color and texture of soil and glaze, unable to attain from simple wood.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.605-611
• /
• 2009

This paper reports the application of radiocarbon wiggle matching for Korean wooden artifacts such as furniture and Buddhist statues for precise dating. Ten biannual samples of 20 years (AD 1249-1268) for AMS (accelerator mass spectrometry) radiocarbon measurements were prepared from a board of the pedestal for Buddhist statue at Jeongsusa (temple) in Kangwhado, Korea, which was dendrochronologically dated. The average 95.4% confidence interval of radiocarbon dating without wiggle matching was 123 year. When wiggle matching technique was applied, it became 37 year, 3.3 times smaller than that without wiggle matching. The results indicated that wiggle matching technique using the calibration curve for northern hemisphere (IntCal04: International radiocarbon calibration curve announced in 2004) can produce precise dates for Korean wooden artifacts which possess as much as 20 tree rings.

• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.479-484
• /
• 2012

Tree-ring dating can be used to date scientifically prehistoric timbers, historical buildings or woodcrafts. It gives a calendar year to each tree ring and produces the felling dates of logs or wood panels. In this study, we applied tree-ring dating to a medicine cabinet in Seoul Museum of History. We obtained tree-ring data from radial or cross section by taking photographs with a digital camera. The cabinet were dated A.D. 1821 to the last ring. It was about 50 year older than the previous medicine cabinets. Tree-ring patterns indicated that the origin of woods for the cabinet would be near Sorak mountains.

• Journal of the Korea Furniture Society
• /
• v.21 no.1
• /
• pp.83-96
• /
• 2010

This study explores terminology for legs and feet in the traditional Korean and Western furniture. Pieces of traditional Korean and Western furniture have been largely made of the eco-friendly material, natural wood, and thus important in the latest trends of wellness, such as LOHAS (Lifestyles of Health and Sustainability) and a green period. Legs in traditional Korean furniture appeared in dinging tables, and the feet in wardrobes. The limited use of legs and feet seems to be influenced by floor-oriented lifestyles of Korean ancestors. In contrast, most pieces of Western furniture, which is from the chair and bed culture, have various styles of foot and leg. While th two groups are from different backgrounds, both of them have developed various legs and feet applying natural subjects such as animals and plants to each of their furniture including wardrobes, cabinets, dining tables, chairs, consoles, etc. It is also found that the traditional Korean furniture can be influenced by a traditional Chinese chair foot called Neabunmajae, which describes inner horse foot. Neabunmajae was known in Korean furniture legs and feet, but the terminology has not been known. The study suggests that terms which appear in traditional furniture but are unknown should be studied more.

• Korean Institute of Interior Design Journal
• /
• v.17 no.3
• /
• pp.94-101
• /
• 2008

The purpose of this study was to analyze the preference of living room furniture and to suggest Korean brand furniture design guideline. Subjects consisted of 171 residents aged up 20 years old in Seoul and Kyung-ki. area. The data were analyzed using the SPSS statistical package. The results of descriptive statistics, factor analysis, t-test and $x^2$-test are presented. The result of this study showed as fallows; 1) Livingroom funiture design with considering family life behavior were needed. 2) Modernizing traditional elements(motives and pattern) were preferred to duplicating traditional elements. 3) In furniture materials, easy to maintaining and cleaning and environmentally-sound materials as solid wood were highly appraised. Also, functional and harmonious furniture design with interior or other furniture were needed. So, modular-system furniture for livingroom would fulfill user's needs which are function, harmony and conciseness. 4) Elegant, easy, unique, functional, and simple design for livingroom were highly appraised. Considering these results, it is necessary to develop more on the modernized traditional furniture based on the various needs of users. These results provide a practical guideline for the development of the Korean brand design for livingroom furniture design.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.204-217
• /
• 2016

Modified poplar has emerged as a potential raw material for furniture production. Lack of specific modified poplar strength information; however, restricts applications in the furniture industry especially as related to strength in corner-joints. Optimization of strength in L-shaped corner dowel modified poplar joints under compression loads utilizing finite element analysis (FEA) by Taguchi method with the focus of this study. Four experiment factors (i.e., Structure Style, Tenon Length, Tenon Diameter, and Tenon Gap), each at three levels, were conducted by adopting a $L_9-3^4$ Taguchi orthodoxy array (OA) to determine the optimal combination of factors and levels for the von Mises stress utilizing ANSYS software. Results of Signal-to-Noise ratio (S/N) analysis and the analysis of variance (ANOVA) revealed the optimal L-shaped corner dowel joint in modified poplar is $45^{\circ}$ Bevel Butt in structure style, 24 mm in tenon length, 6 mm in tenon diameter, and 20 mm in tenon gap. Tenon length and tenon gap are determined to be significant design factors for affecting von Mises Stress. Confirmation tests with optimal levels and experimental test indicated the predicted optimal condition is comparable to the actual experimental optimal condition.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.400-407
• /
• 2013

21C modern society is a time when enough design to dominate the world, a unique design is required new in all aspects. In addition, there is a religion to the best of Zen art. In our cultural heritage with a ethnicity unique unparalleled in the world, and a new recognition of traditional culture and identity of its own in our country, lattice door flower temple the beauty of Korea in the way you tell, it was modernized by interpreting a new one to utilize as a design element of a wood lattice door flower temple. In this study, to re-appear in openwork having regard to the symbolism of pattern and shape of the lattice door flower temple molding properties were highlighted, change the part of the motif, repeated the curve geometric has been designed to simplify as. As a result, it is possible to present the possibility of a design element that can design a traditional Korean is reinterpreted Modern thereby simplify the repetitive element of the related art, for a new aesthetic changes unique. Design Development of wood with a Buddhist temple flower lattice modern re-interpretation, it suits while a strong indication Korea imagery and expressed a variety of needs and personality to the design elements that are competitive in the world the cage, and design of wood, various studies competitive on to be applied to each field is required.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.1-9
• /
• 2012

Sustainable furniture designs are expressed through reutilization, reuse or redesign of the whole of part of natural materials and existing products. These designs contain natural emotions and show those propensities such as uncertainty, integrity, essentiality and experimental natures. Designs that use natural materials such as wood, bamboo, cork, plants, stones and water have sufficient beauty in themselves and thus these materials are not specially processed but their essence is pursued in those designs. Of those materials, the natural material water is used to pursue the essence of aqua while presenting a new furniture design through an experimental method. The circularity of aqua shares its meaning with the circularity of sustainable designs. In addition, the liquidity of aqua will be grafted onto IT technology to express variable shapes in order to present a new direction of furniture designs.