• 한국건설관리학회논문집
• /
• 제15권2호
• /
• pp.23-32
• /
• 2014

한옥에 대한 관심이 급증을 하고 있는 가운데, 가격경쟁력을 갖춘 신한옥이 개발되고 있다. 이러한 신한옥 개발에 있어서, 공법의 개발은 필수적이다. 이에, 본고에서는 신한옥의 개발과정 중 실제 건설된 전통한옥 1채와 신한옥 2채의 사례를 중심으로 신공법 사례 소개와 각 한옥의 부위별 공법을 비교하였다. 또한, 부위별 공법별로 공사비 및 공기의 영향도를 분석하였다. 그 결과, 전통한옥 대비 신한옥의 공사비는 모든 부위에서 저감되었으며, 공기는 대부분의 부위에서 단축되었다. 두 신한옥 사례의 분석 결과, 목재 구조체와 지붕의 공사비 및 공기 비율이 가장 높았으며, 다음으로 벽체, 바닥, 창호, 기초 순으로 나타났다. 효과적인 공사비 저감 및 공기 단축을 위해서는 목재 구조체 및 지붕 부위의 공법개발에 집중해야 한다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.26-36
• /
• 2008

건축구조 설계기준이 개정됨에 따라서 목조건축물의 제한 기준이 완화되어 경골 목조건축의 다층 시공이 가능하게 되었다. 건축물의 규모 증가는 건물에 작용하는 하중을 증가시키므로 증가된 작용하중에 맞추어 하중저항성능을 향상시켜 설계하고 시공해야 한다. 기존에는 경골 목조건축의 전단성능을 향상시키기 위하여 벽량을 보강하는 방법을 적용하였으나 본 연구에서는 홀드다운 접합철물을 사용하는 방법을 적용하였다. 홀드다운은 아직까지 국내에서 보편적이지 않은 접합철물이므로 홀드다운의 국내 적용 적합성을 평가하기 위하여 본 연구를 수행하였다. 홀드다운을 적용한 경골 목조 전단벽에 대하여 정적하중 시험을 통한 전단성능 평가 결과 홀드다운 적용 후에 전단벽의 초기강성, 항복하중 및 기준하중이 향상됨을 확인하였으며, 전단성능 향상에 따라 수평 변위와 전단변형의 증가율이 감소하는 것이 확인되었다. 홀드다운과 스터드의 접합방법에 따른 전단성능의 차이는 크지 않은 것으로 확인하였고, 홀드다운 제품 설계강도가 증가할수록 전단벽의 전단성능도 증가하는 경향이 나타났으나 그 차이가 제품 설계강도 차이에 비하여 크지 않은 것으로 판단되었다. 홀드다운을 설치하는 스터드의 규격에 따라서 89 mm 스터드를 사용한 경우와 38 mm 스터드를 두 겹으로 사용한 경우에 비슷한 성능을 나타내므로 38 mm 부재에 홀드다운을 설치할 경우는 스터드의 두께 보강을 통한 성능 향상이 필요하다고 판단하였다.

• 한국공간구조학회논문집
• /
• 제22권4호
• /
• pp.15-22
• /
• 2022

Micro-climate measurements and computational fluid analysis were conducted to use it as basic data for the preservation and management of the old house of Kim Myung-kwan, a traditional building that is National Folk Cultural Property No. 26. As a result of the actual measurement, the temperature and humidity are relatively evenly distributed indoors unlike outdoors, but the temperature and humidity vary depending on the time change and the installation location in the outdoors. It was found that the temperature increases after dawn and the temperature varies depending on the installation position around 14:00-15:00, when the temperature becomes the highest. In particular, the temperature was high at the outdoor measurement point adjacent to the building and the fence. As a result of the computational fluid analysis, the temperature was high in the buildings and fences in the old house or in the area adjacent to the building, and it was about 1℃ higher than the surrounding area. In this area, it is judged that the thickening of wood will occur more severely than in other locations, and special preservation management is required.

• Earthquakes and Structures
• /
• 제7권1호
• /
• pp.57-82
• /
• 2014

The heritage value of the mixed wood-masonry 18th century Pombalino buildings of downtown Lisbon is recognized both nationally and internationally. The present paper focuses on the seismic assessment of global response and retrofitting of a typical Pombalino building by nonlinear static analyses, performed by the research software Tremuri, which is able to model 3D configurations. The structure is modelled using nonlinear beams for masonry panels, while in case of the internal walls (frontal walls) an original formulation has been developed in order to take into account their specific seismic behaviour. Floors are modelled as orthotropic membrane finite elements: this feature allows to simulate the presence of both flexible and rigid diaphragms, being the first ones more representative of the original state while the second ones of retrofitted configurations. Seismic assessment has been evaluated by applying nonlinear static procedure and comparing the performance of different configurations (by considering various retrofitting strategies). Finally, assuming a lognormal cumulative distribution, fragility curves are obtained to be representative of Pombalino buildings: the most important application of such curves is for seismic risk and loss estimation analyses.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.781-787
• /
• 2009

Training and process analysis in the construction industry has not taken full advantage of new technologies such as building information modeling(BIM). The purpose of this research is to develop a framework for the virtual interactive construction education system using three dimensional technologies. The modules will simulate the construction process for a facility from start to finish using information drawn from real projects in the built environment. These modules can be used as training tools for new employees where they attempt to optimize time and cost in a virtual environment given a limited number of equipment, time and employee options. They can also be used as a process analysis tool for new construction where a number of situational variables can change leading to exposure of potential risk. These modules would be particularly useful for repetitive construction where the initial project is analyzed for optimization and risk mitigation. This paper describes the framework and shows a residential construction example using a 900 square foot wood frame single family house designed for the United States.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.113-119
• /
• 2016

Purpose: In this study, we evaluate the annual energy performance of the detached house which was designed with the aim of zero energy. Method: The experimental house which was constructed in Gonju Chungnam in 2013, is the single family detached house of light weight wood frame with $100m^2$ of heating area. Thermal transmittance of roof (by ISO 10211) and building external walls are designed as $0.10W/m^2K$ and $0.14W/m^2$ respectively and low-e coating vacuum window glazing with PVC frame was installed. Also grid connected PV system and natural-circulation solar water heater was applied and 6kWp capacity of photovoltaic module was installed in pitched roof and $5m^2$ of solar collector in vertical wall facing the south. We analyzed the 2014 annual data of the detached house in which residents were actually living, measured though web-based remote monitoring system. Result: First, as a result, total annual energy consumption and energy production (PV generation and solar hot water) are 7,919kWh and 7,689kWh respectively and the rate of energy independence is 97.1% which is almost close to the zero energy. Second, plug load and hot water of energy consumption by category showed the highest numbers each with 33% and 31%, with following space heating 24%, electric cooker 8%, lighting 3% in order. Hot water supply is relatively higher than space heating because high insulation makes it decreased.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.39-45
• /
• 2016

Purpose: The purpose of this study is to analyze the energy saving and cost benefit analysis of the Low-income Energy Efficiency Treatment Program supported by KOREF(Korea Energy Foundation). This program was launched in 2007 and performs building energy retrofit for the low-income and energy poverty houses. Method: Energy simulation and cost benefit analysis were accomplished for the low-income detached houses. The structure of detached house was a lot og block structure, wood frame (single glass) and concrete roof. Baseline model of the low-income detached houses was proposed. Result: Annual heating energy consumptions were decreased by about 3.2% with the window system replacement(Case 1), 9.3% with reinforcement of insulation(Case2), and 12.5% with both(Case 3) compared to those of baseline model. The construction cost will be recouped within 5 years for the Case 1, 3 years for the Case 2, and 3 years for the Case 3. Case 3 was the most cost beneficient construction method in the analyzed cases in this study.

• 한국주거학회논문집
• /
• 제19권6호
• /
• pp.157-166
• /
• 2008

Until 1960, the major housing type of rural area in Korea was traditional wooden frame building, which was made of natural materials. In the course of modernization and New Village Movement, most of traditional houses have been renovated focusing on changing roof material of rice straw into slate, keeping existing main wooden structure. And then from around 1980, by economical development the new houses have been constructed. On these three phases of traditional type, remodeling type and new construction type, the natural materials of housing facade as wood, soil, stone and plant changed into artificial materials as cement, chemical material and paint. At the same time the exterior color of housing also have been changed and varied. The purpose of this thesis is to find out the changing aspect of exterior color by comparing remodeled and new constructed housing with of traditional housing. The exterior color of one hundred and fifty seven houses were surveyed and the three color attributes of each part of facade, as roof, wall and window, were analyzed and compared. In case of traditional houses, 98.3% of color are concentrated on the warm color of Y and YR on HUE scale, and 88% of their color are low Chroma. And Value of their color has been varied and spreaded from low to high Value scale. From traditional types to remodeled and new constructed houses, the concentration ratio of warm color on Hue scale reduced from 98.3% to 68.7% and ratio of low Chroma was also changed from 88% to 73.2% and the ratio of low Value color reduced from 51.9% to 29.7%. The exterior color of houses in rural area varied on Hue, and the more saturated colors were used and they became brighter compared with color of traditional houses. It is expected that the results of this study can be used for basic data of exterior color planning and improvement into harmonized color with natural environment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.211-216
• /
• 2006

Within the frame of the MERCOSUR (South Common Market), one of the most important goals to achieve by its member states is a better cost effective international cargo transportation system. For this purpose the project of developing a commercial waterway linking the east region of Uruguay with the south of Brazil has been under study for a number of years now. Because of the high costs involved on the development of such waterway, the project has been indefinitely delayed. It is our intention to show an alternative way to reduce the present obstacles by using a budget oriented approach in order to determine the vessel best suited to use on the proposed waterway. So far, every study related to the project has been focused on the amount of work needed to modify the environment in order to accommodate the hardware already available in the region. The conclusions show that the cost of opening and maintaining the required navigation channel is high enough to discourage investment; the added responsibility to take care of any environmental damage incurred during the building and/or operation of the waterway makes searching for a less costly and hazardous option an interesting challenge. The proposed terminal on the Cebollat? River would be located at the heart of the Uruguayan rice growing region. Uruguay exports 90% of its rice production, being Brazil its biggest buyer. Wood chips and clinker are the other types of cargo considered to use the proposed waterway in route to either Brazil or to overseas destinations through the deep water port of Rio Grande. Through the analysis of local data by a Geographical Information System, international regulations regarding inland waterways and shallow draught vessel characteristics, we seek to propose a cost efficient alternative to apply on this particular scenario.

• 헤리티지:역사와 과학
• /
• 제55권4호
• /
• pp.38-53
• /
• 2022

이 글에서는 삼국시대 토성을 중심으로 축조 기법과, 그 중에서도 판축기법을 둘러싼 개념과 용어를 정리, 검토해 보았다. 연구자별로 토성의 실체 및 축조 방법을 놓고 다양한 개념과 용어들을 사용하여 성격을 규정함으로써 혼란이 야기되고 있기 때문이다. 판축법은 성벽, 담장, 건물의 기단 등을 조성하기 위해 판으로 틀을 만들고 그 안에 흙이나 모래 등을 겹겹이 부어 공이 등으로 찧어서 견고하게 쌓아 올리는 전형적인 고대 토목기법 또는 건축 기법이다. 따라서 판축법으로 토성을 축조하였음을 입증하기 위해서는 성벽 내에서 판목(협판), 이를 고정하기 위한 기둥(고정주), 협판을 받치기 위한 횡장목과 종장목, 흙을 견고히 다진 달구질 흔적 등이 발견되어야 한다. 다만, 국내에서는 이와 같은 증거들이 온전히 발굴된 사례가 극히 적기 때문에 판축에 대한 기준을 얼마나 엄격히 적용할 것인지에 대해서도 합의가 필요한 실정이다. 토성 축조에 동원된 판축기법과 관련된 용어는 그 개념에 관한 용어를 필두로 판축 원리와 판축 단위, 그리고 구체적인 판축 기술과 관련된 용어로 구분하여 실제 사례를 통해 설명하였다. 특히 풍납토성에서는 고대 판축토성 축조에 이용된 전형적이고 다양한 기법들이 확인됨으로 해서 판축 기법의 원리와 기술을 이해할 수 있는 결정적인 자료들을 확보할 수 있었다. 향후 풍납토성 이외의 유적들에서 판축과 관련된 증거들이 더 많이 발견되어야 보다 보편적인 판축 기법의 이해가 가능할 것이다.