• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.51-56
• /
• 1999

Finite element method was utilized to analyze crack tip stress and displacement field under drying stress case as stepwise loading. Opening mode of single-edge-notched model was employed and analyzed by linear elastic fracture mechanics of plane stress case. The drying stresses were applied as stepwise loads at the boundary elements of the model with 10 steps of time serial. The stress intensity factor($K_I$) for opening mode reached to its maximum just prior to the stress reversal. The $K_I$ from the displacement fields revealed 1.7 times higher than those from stress fields. By comparing the two sets of $K_I$ from displacement and stress fields, single parameter $K_I$ showed its validity to characterize displacement fields around the crack tip front while stress field could not be characterized due to large variations between two sets of data.

• Journal of the Korean Wood Science and Technology
• /
• 제51권6호
• /
• pp.526-541
• /
• 2023

Wooden structures are widely used, particularly in earthquake zones, owing to their light weight, ease of application, and resistance to the external environment. In this study, we aimed to improve the mechanical properties of laminated timber beams using novel hybrid systems [carbon-fiber-reinforced polymer (CFRP) and wire rope]. Within the scope of this study, it is expected that using wood, which is an environmentally friendly and sustainable building element, will be more economical and safe than the reinforced concrete and steel elements currently used to pass through wide openings. The structural behavior of the hybrid-reinforced laminated timber beams was determined under the loading system. The experimental findings showed that the highest increase in the values of laminated beams reinforced with steel ropes was obtained with the 2N reinforcement, with a maximum load of 38 kN and a displacement of 137 mm. Thus, a load increase of 168% and displacement increase of 275% compared with the reference sample were obtained. Compared with the reference sample, a load increase of 92% and a displacement increase of 14% were obtained. Carbon fabrics placed between the layers with fiber-reinforced polymer (FRP) prevented crack development and provided significant interlayer connections. Consequently, the fabrics placed between the laminated wooden beams with the innovative reinforcement system will not disrupt the aesthetics or reduce the effect of earthquake forces, and significant reductions can be achieved in these sections.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.23-30
• /
• 1999

경골 목조 트러스를 접합하는데 가장 널리 사용되는 메탈 플레이트 접합부의 거동을 해석하기 위한 연구가 많이 수행되어왔다. 유한요소법을 사용한 해석은 그 연구들중의 하나이다. 선형 모델을 사용한 유한요소법은 하중-변위 곡선의 초기 경사를 예측하는데는 유효하게 사용될 수 있다. 하지만, 하중이 증가할수록 예측된 변위는 실험치에 비해 과예측이 된다. 따라서 선형 모델을 비선형부분을 예측하는데는 사용할 수 없다. 실제 거동을 더욱 정확하게 예측하기 위해, 본 연구에서는 비선형 항을 유한요소 모델에 첨가시켰다. EA와 AA 형태에서는 예측치와 실험치간에 고도의 유사성을 보여주었다. 하지만, EE와 AE 형태에서는 곡선의 비선형 부분에서 실험치와 예측치가 약간의 차이를 보여주었다. 이러한 결과는 슬립의 효과를 충분히 반영하지 못한 것에 기인한 것으로 추측된다. 결과적으로 메틸플레이트 접합부의 거동에 있어서 비선형 해석의 정확도를 증진시키기 위해서는 반드시 슬립의 효과가 고려되어야 할 것이다.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.627-634
• /
• 2020

The past years were marked by an increase in the use of wood waste in civil and mechanical constructions. Date palm waste remains also one of the most solicited renewable and recyclable natural resources in the composition of composite materials. In Algeria, a great amount of this type of plant wastes accumulates every year. In order to make use of this waste, a new wood-epoxy composite material based on date palm petiole particleboard is developed. It makes use of date palm petiole particleboard as reinforcement and epoxy resin as matrix. The size of the particles reinforcement are between 1~3 mm and proportion of reinforcement used is 37%. In this work, experimental and numerical studies are conducted in order to characterize the wood fibre-epoxy plates. Firstly, experimental modal analysis test was carried out to determine Young's modulus of the elaborated material. Then, in order to validate the results, compression test was conducted. Furthermore, additional information about the shear modulus of this material is obtained by performing an experimental modal analysis to extract the first torsional mode. Moreover, a finite element model is developed using ANSYS software to simulate the vibration behaviour of the plates. The results show a good agreement with the experimental modal analysis, which confirms the values of Young's modulus and shear modulus.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.147-155
• /
• 2016

본 연구는 사탕수수 부산물 펄프를 Element Chlorine Free (ECF) 표백 처리할 때 마지막 과산화수소 표백단계를 추가하여 최종 표백 펄프의 잔류 이산화염소를 제거하고, 총 이산화염소 사용량을 제거하고자 하였다. 특히 과산화수소 표백단계를 효과적으로 사용하기 위한 킬레이트 처리 단계를 반응 조건이 비슷한 이산화염소 표백 단계와 동시 진행하였을 때, 개별적으로 킬레이트 처리를 진행한 표백 펄프의 표백 특성을 비교하였다. 총 이산화염소 사용량이 4.5%(w/w oven dried pulp)일 때 EDTA의 경우 킬레이트를 동시 처리할 때 백색도와 점도는 각각 87.0% ISO와 25.8 cPs로 개별 처리하는 경우 보다 더 높은 표백 특성(86.4% ISO, 25.2 cPs)을 나타냈다. 반면 DTPA를 킬레이트 화합물로 사용하는 경우 동시처리 시(83.9% ISO, 21.9 cPs) 개별처리(86.8% ISO, 25.6 cPs) 보다 표백 특성이 낮은 수준을 나타냈다. 특히 EDTA를 킬레이트 화합물로 사용시 잔류 전이금속(망간 이온, 철 이온) 농도가 개별처리 시 0.65 ppm, 66.74 ppm으로 나타난 반면 동시 처리시 0.52 ppm과 55.68 ppm으로 킬레이트 처리 효과가 향상됨을 확인할 수 있다. DTPA는 동시 처리시 0.71 ppm과 116.88 ppm의 망간 이온, 철 이온 농도가 나타난 반면 개별 처리시 0.56 ppm, 86.17 ppm의 농도로 동시 처리 시 킬레이트 처리 능력이 감소됨을 알 수 있다. 이를 통해 킬레이트 화합물 종류와 처리 방법에 따라 킬레이트 효과의 차이가 나타나며, 효율적인 공정을 위해서는 EDTA를 킬레이트 화합물로 이산화염소 표백단계와 동시 처리하는 것이 표백 효율과 공정효율을 위해 유리한 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권5호
• /
• pp.343-351
• /
• 2012

A large diameter roundwood is an important element of Korean traditional buildings, Hanok, and is hard to be dried without surface cracks. Four different pretreatments, such as pre-cracking, oil heating, kerfing-oil heating and PEG impregnation, were investigated for reducing the surface cracks of large-diameter roundwood specimens during heat treatment. The roundwood specimens of pre-cracking, oil heating and kerfing-oil heating showed surface cracks during pretreatment, but that of PEG impregnation did not. It was confirmed that kerfing reduced the total crack width. Among the four pretreatments and control only the PEG impregnation roundwood specimen had no crack on both outer and inner surfaces after heat treatment. The PEG impregnation specimen shrank only 1.6% in the tangential direction while the pre-cracking did 8.0%.

• 한국가구학회지
• /
• 제21권3호
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 추계학술발표대회 논문집
• /
• pp.140-143
• /
• 2004

The move from steel tubes to bent wood and the 'laboratory experiments' with wood which Aalto carried out in order to create furniture gave him vital impulses as he sought and found his own architecture style in the 1930s. Like his architecture Aalto's chair designs represent a 'humanized' interpretation of the severe aesthetic and radical technological experimentation of the Modern Movement. The purpose of this study is to find what is the result of the form of his works on the basis of main idea and tend of his works, to search the element and principle of formal composition, to establish the relation-ship between the architect's philosophy and the form of his works. Aalto's furniture, constructed of laminate bent wood or moulded plywood, is not only functionalistic, but also ideal for the psychological need of the people, which is the special quality that complements the Factionalism that features mostly on the metal tube furniture. It shows that Aalto is a humanist dealing with mechanized age.

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.1-15
• /
• 1987

This experiment was undertaken for the purpose of investigation of relative durability about thirty sorts of the korean native wood and nine sorts of the wood destroying fungi Polystictus versicolor, Irpex consors. Poria vaporaria, Merulius lacrymans, Schizophyllum commune, Trametes pini, Lenzites betulina, Paxillus panuoides by means of a laboratory methods. The results obtained are; (from the table 2 to 10) 1. By measuring the percentage of loss in weight with regard to Polystictus versicolor, the sap wood contained in Junipeus chinesis was calculated at 18.2%, therefore it is much higher durability than any others and the sap wood contained in Pinus densiflora was measured at 44.10%, therefore it is much lower durability than any others. 2. By measuring the percentage of loss in weight with regard to Irpex consors, the heart wood contained in Butula schmidtii was calculated at 1.23%, therefore durability is very high and the heart wood contained in Quercus dentata was calculated at 26.79%, therefore durability is very low. 3. By measuring the percentage of lass in weight with regard to Lenzites betulina, the heart wood contained in Betula schmidtii was calculated at 5.33%, therefore it is much higher durability than any others and the sap wood with regard to Abies holophylla was measured at 45.48%, therefore durability is very low. 4. By measuring the percentage of loss in weight with regard to Poria vaporaria, the sap wood contained in Fraxinus rhynchophylla was calculated at 5.57%, therefore durability is very high and the sap wood contained in Paulownia coreana was calculated at 35.6%, therefore it is much lower durability than any others. 5. By measuring the percentage of loss in weight with regard to Merulius lacrymans, the heart wood contained in Castanea crenata was measured at 0.09% and in the next place, the heart wood contained in Abies holophylla calculated at 0.15% did not decay almost and the sap wood contained in Cornus controversa was measured at 32.88%, therefore it is lower durability than any others. 6. By measuring the percentage of loss in weight with regard to Schizophyllum commune, the sap wood cantained in Junipensis chinensis was calculated at 1.09%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 36.87%, it is much lower durability than any others. 7. By measuring the percentage of loss ill weight with regard to Trametes pini, the sap wood contained in Robinia pseudo-acacia was calculated at 1.33%, therefore durability is very high and the sap wood contained in Comus controversa was calculated at 33.19%, it is much lower durability than any others. 8. By measuring the percentage of loss ill weight with regard to Paxillus panuoides. the heart wood contained in Zelkova serrata was calculated at 1.73%, therefore durability is very high and the sap wood contained in Populus deltoides was calculated at 42.30%, therefore durability in very low. 9. By measuring the percentage of loss in weight with regard to Dardalea quercina, the heart wood contained in Castanea crenata was calculated at 0.92%, therefore durability is very high and the sap wood contained in Cornus controversa was calculated at 32.00% therefore durability is very low. The above results are summarized as follows 1. Durability between the heart wood and the soft wood find that it is nonsignificant, while durability is higher heart wood than sap wood. 2. Special sorts including in the element like Castanea cenata, Robinia pseudo-acacia, Juniperus chinensis and heart wood like Betula schmiditii and Styrax obasia are highly durable and soft wood like Cornus controversa, Populus davidiana, Salix koreensis, Celtis jessensis are lowly durable in general. 3. Among the wood destroying fungi Paxillus panuoides is highly durable and as follows. Poria vaporaria, Lenzites betulina and the Daedalea quercina is less in general and Irpex consors, Mersulius lacrymans are a middle degree.