• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.70-78
• /
• 2008

In this study, the composition and physico-chemical characteristics of school waste which is located in B area, kyunggi-do was investigated. It is necessary to measure the characteristics of school waste to build the data-base for resource and recycling of waste. This school waste was composed of 12.25% of food wastes, 56.26% of papers, 9.26% of plastics&vinyls, 1.52% of textiles, 3.70% of wood, 0.11% of rubbers&leathers and others, respectively. Most of school wastes are mainly composed of paper and plastic waste and composition of combustible waste was about as 90%. From 3-components analysis, contents of moisture, combustible component, and ash was 5.72%, 88.29% and 5.98%, respectively. Moisture content was higher in Agricultural Dwelling school area compare to the urban dwelling school area. The chemical element of the school waste has the high order of carbon, oxygen, hydrogen on the dry basis of wastes and the low heating value of the MSW which is measured by calorimeter is shown as 3720.44kcal/kg.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.19-27
• /
• 1993

Recent work in the mechanics of fracture points out the desirability of a knowledge of the elastic energy release rate, the crack extension force, and the character of the stress field surrounding a crack tip in analyzing the strength of cracked bodies. The objective of this work is to provide a discussion of the energy rates, stress fields and the like of various cases for anisotropic elastic bodies which might be of interest. Reinforced concrete, wood, laminates, and some special types of elastic bodies with controlled grain orientation are often orthotropic. In this paper, determination of the stress intensity factors(SIFs) of orthotropic plane elastic body using crack tip singular element and fine mesh in near the crack tip is performed. A numerical method in this paper was used by displacement correlation method. A numerical example problem of an orthotropic cantilevered single edge cracked elastic body subjected to shear loading was analyzed, and the results of this paper are in good agreement with those of the others.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.17 no.1
• /
• pp.1-15
• /
• 2004

The different growth steps of human show the different energetic phenomenon such as the strength of triple energizer, the sale of extra meridian, and the stability of 12 meridians. So we have to understand the physiological and pathological phenomena on this point of view. Especially atopic dermatitis means the loss of adaptability under the lack of genuine energy. If you approach to this disease not with any perception of excess or deficiency of the human genuine energy but with simple symptom enumeration or partial diagnosis, it will be dangerous. So we must approach to this disease with more concrete and objective body-centered standard. Thus when we cure and diagnose infants with this disease, we should focus on stablizing the "Energy of Earth(土)" digestive ability, under the consideration of inducement to the enough "Byun-Jeung-Hu(變蒸候)" and the function of Triple Energizer. Through this process we can lead infants to the beginning equipment state(始全). Until 7 years old, we should stabilize the Link Vessel(維脈) by clarifying interior and exterior classification of Nutritive Element and Defensive Energy to control the child's energy of metal(金), water(水), wood(木) and fire(火) in the basis of the energy of earth(土). And also we should stabilize the Heel Vessel(？脈) through the Water and Fire complement each other to control the movements and to control sleep and awakening. Through this process, we can lead children to the basal equipment state(本全). After then, until adolescent phase, we should control 12 meridian and 8 extra meridian by leading vital function to be harmonized and prosperous on the basis of the meridian to reach the mature equipment state(旣全). Adult atopic dermatitis should be controlled through conciliation between meridian and internal organs by differentiating male from female.

• Journal of architectural history
• /
• v.22 no.5
• /
• pp.23-35
• /
• 2013

This study aims to investigate the architectural characteristics of the Da-bo stupa by examining the correlation among architectural languages and by studying the features of its architectural components and transitional changes shown in Da-bo stupa line drawings in Dunhuang Mogao Grottes. The results are as follows. 1st, the Da-bo stupa of Dunhuang faithfully follows the sutra of lotus, and although the form changes, the fundamental essence of Bo-tap-yong-chul and two seated Buddhas provided by the Gyun-bo-tap-pum in the sutra of lotus is consistent. 2nd, the pagoda body can be periodically divided into parasol, stupa, and royal palace types. The parasol type has an incomplete tower body, which makes distinguishing each of its architectural components difficult. The stupa type appeared between the early (AD 618-712) and middle (AD 766-835) Tang dynasty. It combines the form of Indian stupa type and East Asian wood structural architecture. The royal palace type, which appeared between the peak period of the Tang (713-765) and Sung Dynasties, shows the standardized pattern of the Da-bo stupa described as two seated Buddhas and Bo-tap-yong-chul. 3rd, the use of a stylobate does not appear in the early construction of Da-bo stupa, only in the later period, in the form of high pillars. Forms include many Su-mi-jwah and three-way stairways and Dab-do, but as time passes, the forms are simplified to the form of high pillars. 4th, the purpose of early Da-bo stupa was to provide space for Da-bo-yu-rae of Gyun-bo-tap-pum; hence, it did not have sangryoon(the top part). However, after it was influenced by general pagodas, sangryoon was established. Toward the Tang Dynasty, sangryoon has come to emphasize the forms of boryoon(nine wheels) or dome. However, this form is eventually simplified to only retain bo-joo(the orb).

• KSBB Journal
• /
• v.31 no.1
• /
• pp.73-78
• /
• 2016

The aim of this study attempted to verify the possibility of bioethanol production using wasted medium density fiberboard (wMDF). In order to produce bioethanol from wood cellulosic materials must be carried out the process of pretreatment, saccharification, fermentation and distillation. First, the wMDF was pretreated using sodium chlorite and pretreated wMDF was prepared to 8% slurry and then slurry was saccharified with the commercial enzyme (Cellic CTec3). The fermentable sugar and pH of saccharified substrate were about 5.5% glucose and 4.4, respectively. Herein we compared the results of ethanol yield according to the nutrients added or without addition to increase ethanol yield. Ethanol fermentation was finished in about 24 hours, but it was delayed in experimental group without nutrients. Ethanol content and fermentation ratio of the final fermented mash prepared by utilizing jar fermenter was 25.40 g/L and 86.64%, respectively. At this time, the maximum ethanol productivity was confirmed as 1.78 g/Lh (ethanol content 21.38 g/L, 12 h), and the overall ethanol productivity was 1.05 g/Lh (ethanol content 25.27 g/L, 24 h). Using fermented liquid we could produced bioethanol 95.37% by continuous distillator packed with copper element in laboratory scale. These results show that wMDF has a potential valuable for bioethanol production.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.87-103
• /
• 2021

Objectives The purpose of this study was to investigate the development process and describe the diagnosis methods, theories and treatments of Mongolian traditional medicine and Korean traditional medicine through literature records and prior studies. Methods Literature records and previous studies on traditional medicine of both countries were collected through various sites in Mongolia (Esan, Mongoliajol, Kok, Yumpu, Scribd, Science and Technology Foundation [STF]) and Korea (Koreanstudies Information Service System [KISS], Korea Institute of Science and Technology Information [KISTI], National Digital Science Library [NDSL], Research Information Sharing Service [RISS], Oriental Medicine Advanced Searching Integrated System [OASIS]). Also the English database was searched through PubMed. In the case of Mongolian traditional medicine, medical books published in Mongolia were mainly referenced and used for research. Results Studying the development process, basic concepts and the system of diagnosis and treatment of the two traditional medicine, several commonalities and differences were revealed. Conclusions This study showed that the scope of diagnosis methods between Mongolian and Korean traditional medicine were slightly different, and that the medical terminology for the diagnosis method had slightly different contents from each other. Although there were many similarities in treatments of Mongolian and Korean traditional medicine, the Chuna therapy is found in Korean traditional medicine only. The basic theories constituting traditional medicine were the same, but the five-element theory used by the two countries differs in the following two factors. Mongolia uses elements of air and space as the theory of five elements, while Korea uses elements of wood and iron.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.25-32
• /
• 2022

In this paper, the instability of the domed spatial truss structure using wood and the characteristics of the buckling critical load were studied. Hexagonal space truss was adopted as the model to be analyzed, and two boundary conditions were considered. In the first case, the deformation of the inclined member is only considered, and in the second case, the deformation of the horizontal member is also considered. The materials of the model adopted in this paper are steel and timbers, and the considered timbers are spruce, pine, and larch. Here, the inelastic properties of the material are not considered. The instability of the target structure was observed through non-linear incremental analysis, and the buckling critical load was calculated through the singularities and eigenvalues of the tangential stiffness matrix at each incremental step. From the analysis results, in the example of the boundary condition considering only the inclined member, the critical buckling load was lower when using timber than when using steel, and the critical buckling load was determined according to the modulus of elasticity of timber. In the case of boundary conditions considering the effect of the horizontal member, using a mixture of steel and timber case had a lower buckling critical load than the steel case. But, the result showed that it was more effective in structural stability than only timber was used.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.26-52
• /
• 1987

Among the diffuse-porous woods which arc dominant in Korea and used as construction materials due to their wood quality, ten species of six genus involving seven species of three genus in Betulaceae were studied on the radial variation of structural demenb. The species studied were Betula platyphylla var. japonica, B. ermanii, B. davurica, B. scstata, B. schmidtii, Carpinus laxifora, Alnus japonica, Prunus sargentii. Acer mono and Diospyros kaki. Wood fiber, vessel elements and ray increased rapidly in size from pith to a certain annual ring. After then the radial variation in size of the main structural elements seemed to be divided into three types; levelled off curve pattern indicating constant size(type I), continuously increasing curve pattern showing ever increase in size (type II) and parabolic curve pattern showing the gradual decrease after the maximum (type III), but the variation types by structural dements were different even in the same species. Based on the results from this study, it appears to be reasonable to consider the stabilized age of wood fiber, vessel elements and ray rather than considering wood fiber length in distinguishing mature woods from juvenile woods.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.112-120
• /
• 2004

In this study, the physico chemical characteristic of MSW and sludge in west area of Kangwondo was investigated for database, managing the waste and waste treatment facility. The sampling sites were selected as 6 different MSW generation area and 2 sludge generation area. it is necessary to measure the characteristics of MSW to build the data-base. The year of 2000, 197.4ton/day of MSW which was generated in this area. This MSW was composed of 26.6% food wastes, 24.2% of papers, 22.8% of plastics & vinyls, 9.6% of textiles, 3.80% of wood, 2.8% of rubbers & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and combustible waste is more than 89%. The generation of papers and vinyls are almost same for different seasons For 3-components of MSW, moisture is 40.2%, combustible component is 52.1% and ash is 7.7% and for 3-components of sludge, moisture is 83.3%, combustible component is 7.7% and ash is 9%. The chemical element has the high order of carbon(51.6%), oxygen(38.6%), hydrogen(7%) on the dry basis of wastes. And the high heating value of MSW is 4989.4 Kcal/kg sludge is 4428.04 Kcal/kg and low heating value of the MSW which is measured by calorimeter is 2032.88kcal/kg. From the leaching test of wastes, there is no heavy metals.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.19-33
• /
• 1997

This study reports the results about the petrography and geochemical characteristics of 10 representative volacanic rocks. The Cretaceous volcanic rocks distributed in the vicinity of the Kageo island composed of andesitic rocks, dacitic welded tuff, and rhyolitic rocks in ascending order. Sedimentary rock is the basement in the study area covered with volcanic rocks. Andesitic rocks composed of pyroclastic volcanic breccia, lithic lapilli tuff and cryptocrystallin lava-flow. Most dacitic rocks are lapilli ash-flow welded tuff. Rhyolitic rocks consists of rhyolite tuff and rhyolite lava flow. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic rocks, but dacitic rocks. The variation of major and trace element of the volcanic rocks show that contents of $Al_2O_3$, FeO, CaO, MgO, $TiO_2$ decrease with increasing of $SiO_2$. On the basis of Variation diagrams such as $Al_2O_3$ vs. CaO, Th/Yb vs. Ta/Yb, and $Ce_N/YB_N$ vs. $Ce_N$, these rocks represent mainly differentiation trend of calc-alkaline rock series. On the discriminant diagrams such as Ba/La and La/Th ratio, Rb vs. Y + Nb, the volcanic rocks in study area belongs to high-K Orogenic suites, with abundances of trace element and ternary diagram of K, Na, Ca. According to the tectonic discriminant diagram by Wood, these rocks falls into the diestructructive continental margin. K-Ar ages of whole rocks are from andesite to rhyolite $97.0{\pm}6.8~94.5{\pm}6.6,\68.9{\pm}4.8,\61.5{\pm}4.9~60.7{\pm}4.2$ Ma, repectively. Volcanic rocks in study area show well correlation to the Yucheon Group in terms of rock age dating and geochemcial data, and derived from andesitic calc-alkaline magma that undergone low pressure fractional crystallization dominated plagioclase at <30km.