• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.295-301
• /
• 2016

본 연구는 4개 종자산지(Yugoslovia, ltaly, United Kingdom, Bulgaria)의 글로티노사오리나무(Alnus glutinosa)를 대상으로 목섬유 길이, 도관 길이 및 직경인 해부학적 성질을 조사하여, 이들의 종자산지 간 및 생장속도와의 관계를 규명하였다. 글로티노사오리나무는 산공재, 계단상천공, 교호상벽공으로 나타났다. 접선단면에서 방사조직 높이는 9~11, 횡단면에서 방사조직 수는 16~26개로 나타났다. 산지 간의 목섬유 길이, 도관 길이 및 직경에서 만재부에서는 차이가 없었고, 조재부에서는 차이가 있는 것으로 나타났다. 3개 산지는 생장이 좋을수록 만재부의 목섬유 및 도관 길이가 짧아지는 것으로 나타났으나, 유고슬로비아산은 생장이 좋으면서 목섬유 및 도관길이도 긴 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.40-47
• /
• 1995

This study was carried out to develop a finite element analysis model that considers the semi-rigid characteristics of a wood-dowel joint, which is different from conventional joints that are used in the field of engineering. Wood-dowel joints are classified as semi-rigid joints that possess the following characteristics: (1) they are less stiffer than rigid joints and (2) their stiffness is determined by the dowel's diameter, depth of dowel embedment in the face member and quantity of pin dowels. In this study a finite element model that considers the changes in stiffness according to the above mentioned factors was developed and its suitability was verified by experiments using a wood-dowel joint test specimen made up of particleboards. After comparing the experimental results and the analysis results of the wood-dowel joint which was applied with the proposed finite element model, less than 10% of error was found which is considered to be negligibly small. Hence this shows that this proposed finite element model can be used to predict deformation of wood-dowel joints.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.39-44
• /
• 1994

This study was carried out to investigate features pertaining to spiral thickenings, which was considered one of the most important diagnostic values, for wood identification. Species, kind of cells with spiral thickening, and ridge numbers of spiral thickening per axial mm were recorded in 71 families, 144 genera, 316 species of Korean hardwoods. Spiral thickening was observed in 128 of 316 species, about 40.5 % of all the investigated, and classified into 6 types on the basis of distributional patterns and morphological features as follows: 1. Type 1, present throughout all vessel element, which was found in 14 families, 19 genera, 43 species. 2. Type 2, present only in small vessel element, which was found in 18 families, 29 genera, 41 species. 3. Type 3, present both in small vessel element and wood fibers, which was found in 8 families, 17 genera, 29 species. 4. Type 4, present in wood fibers, which was found in 1 family, 1 genus, 1 species. 5. Type 5, present only in tail of vessel element, which was found in 4 families, 5 genera, 9 species. 6. Type 6, being present in vessel element faintly or partially, which was found in 2 families, 3 genera, 5 species.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.46-53
• /
• 1995

The anatomy of Korean diffuse-porous woods, 36 families, 75 genera, 145 species, 215 specimens was described and analyzed. Sixteen wood anatomical characters, habit and phenology factors were determined by simple correlation and principal component analysis. Strong positive correlations were found between vessel element length and fiber length, ray width and ray height, simple pits of fiber wall and paratracheal parenchyma distribution. The results of principal component analysis (PCA) disclose the primitive characteristics and the direction of xylem evolution of Korean diffuse-porous woods. The xylem evolution scenario for Korean dicotyledonous woods is considered to be developed in the direction of decreasing trends of vessel frequency, vessel element length, and length/diameter(L/D) ratio of vessel element but increasing trends of vessel diameter, fiber length/vessel element length(F/V) ratio, libriform wood fibers, simple perforation, and homogeneous ray composition. Increase of vessel diameter and decrease of vessel frequency seem to be related to the improvement of conductive efficiency, and increase of the vessel element length and occurrence of scalariform perforation in vessel element may be related to enhanced of conductive safety. Also the libriform wood fibers and ray features appear to have relationship with mechanical support and nutrient metabolism, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.138-146
• /
• 2014

Stem and root of Lindera erythrocarpa were described and compared in the wood anatomical aspects. Root wood appeared to differ from stem wood in the qualitative features of growth ring boundary, extraneous materials in vessel element and ray parenchyma cell, outline of ray, and sheath cell. In the quantitative features, there were differences between these two tissues in vessels per square millimeter, tangential diameter of vessel lumina, length of vessel element, and width of ray. These wood anatomical differences between stem above ground and root below ground were thought to be attributed to their different growth environments.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.77-82
• /
• 1995

With the aim to utilize pine wood(Pinus densiflora Sieb. et Zucc.) as an interior building materials, such as flooring material, monoethylene glycol(MEG) resin solution was impregnated into greenwood. Specimens of three different qualities, that is, normal wood, resinous wood and compression wood, were prepared. Distribution of resin element(phosphorus) in MEG resin solution-impregnated woods and preservative effectiveness against brown rot fungi(Tyromyces palustris and Serpula lacrymans) of these woods were investigated. The results were as follows: 1. The concentration of phosphorus into cell walls of resinous wood and compression wood was lower compared to that of normal wood. This shows that the quality of wood has an influence on the penetration of MEG resin solution into the wood. It was shown from a leaching test that MEG resin could be leached out easily from the cell walls. 2. The resinous wood and compression wood, even without MEG resin solution impregnation had high decay resistance. For normal wood, significant improvement of preservative effectiveness was observed after impregnation of MEG resin solution. It was shown that MEG resin was leached out from the woods after leaching test, resulting in the reduction of preservative effectiveness. From this result, suitability of MEG resin solution-impregnated woods as an interior materials was recognized.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.421-428
• /
• 2015

본 연구는 5개 종자 산지(Carleton, Simcoe, Chatham, Bancroft, Unknown)의 루브라참나무(Quercus rubra)를 대상으로 해부학적 성질을 조사하여, 이들의 종자산지 간 및 생장속도와의 관계를 규명하였다. 루브라참나무는 환공재로서 공권부는 대형도관이 1~3열로 배열하다가 공권 외부는 소형도관이 방사상으로 배열하였다. 산지 간에는 조재부 목섬유 길이, 조재부 도관의 직경에서만 차이가 있었다. 생장속도와는 목섬유 길이 및 도관요소 직경에서 만재부는 상관관계가 없고, 조재부는 부의 상관이었다. 도관요소 길이는 생장속도와 조, 만재에서 관계가 없었다. 조, 만재부에서의 구성요소 비율은 목섬유, 방사조직은 만재부에서 높았고, 도관요소는 조재부에서 높았다. 방사조직 높이는 11~15개 범위였다.

• Composites Research
• /
• 제28권2호
• /
• pp.58-64
• /
• 2015

본 논문에서는 샌드위치 복합재 패널로 제작되는 사용후 핵연료 수송용기 충격완충체의 유효등가 유한 요소모델을 제시하는데 목적을 둔다. 샌드위치 복합재 패널은 금속재 면재와 각각 우레탄 폼, 발사목 그리고 레드우드 심재로 구성되었다. 충격완충체의 유효등가 유한요소 모델은 샌드위치 복합재 패널의 저속충격 시험과 해석결과와의 비교를 통해 제시되었으며, LS-DYNA 3D를 사용한 동적 외연 유한요소해석에 의해 수행되었다. 시험과 해석 결과, 충격완충체 샌드위치 패널의 유한요소 모델은 적층쉘 요소의 면재와 솔리드요소의 심재를 사용한 기존의 혼합모델링 기법에 비해 면재와 심재 모두 솔리드 요소를 적용하는 방법이 더 정확한 결과를 나타냄을 확인하였다. 이때 발사목과 레드우드 심재는 요소제거 기능을 갖는 솔리드 요소로 모델링 되는 것이 추천되어진다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.70-75
• /
• 1998

In this paper, the relationships between volumetric mixing ratio of rubber chip and physical and mechanical properties of wood/rubber composite panel was examined in order to investigate the mixture characteristics of wood and rubber chip. Because of the specific gravity of rubber differed from wood chip, physical properties of wood/rubber composite panel was shown very different values by mixing rate of chip element. Specific gravity in air-dry of composite panel was increased rapidly as volumetric percent of rubber chip was increased. Moisture content of composite panel was decreased as volumetric percent of rubber chip element was increased. This results was considered that wood weight is light and porosity material for moisture absorption. Compressive strength and modulus of rupture in bending test were decreased as volumetric percent of rubber chip increased. By mixing ratio control of chip elements, various wood/rubber composite panel can be applicable to every interior materials such as subfloor, playground, and exterior materials such as road blocks for recreational facilities in garden and forest and city parks.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.20-26
• /
• 2014

본 연구에서는 유한요소해석을 이용하여 응력적층 바닥판의 구조성능을 평가하였다. 바닥판의 구조성능은 처짐과 응력, 압체력의 변화로 평가할 수 있다. 하중 재하 후 바닥판의 처짐 형상을 확인한 결과 하나의 판처럼 거동하는 것을 확인하였다. 이는 압체력에 의해 각 부재 사이에 마찰력이 작용했기 때문이다. 또한 초기 압체력과 산출된 압체력을 비교한 결과 바닥판의 처짐과 함께 압체력이 감소했다. 이는 하중에 의해 바닥판의 변형이 발생하면서 작용하는 힘이 줄어듦에 따라 압체력이 감소한 것으로 판단된다. 그러나 재료의 소성 특성이 제대로 반영되지 않았기 때문에 잔류응력과 잔류변형이 고려되지 않았으므로 추후 이에 대한 연구가 필요하다.