• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.83-89
• /
• 2006

Because the surface of pine wood is very soft, there have been many attempts, like as surface coating, resin impregnation, and densificationt, to harden the surface of wood for its interior use. This study was carried out for surface hardening of pine wood by laminating of melamine resin sheet. The effect of laminating method on the characteristics of melamine resin sheet-laminated wood(MLW) was investigated. Flat-sawn softwoods were suitable for MLW making. And the pre-drying of wood at $105^{\circ}C$ for 30min, before laminating, was effective for preparing of defect-free MLW. The abrasion resistance of pine wood was greatly improved by laminating of melamine resin sheet on its surface. Consequently, the laminating of melamine resin sheet was proved to be a favorable method for improvement of surface abrasiveness of pine wood.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.71-79
• /
• 2000

Two linerboards consisting of corrugated board were coated with oxidized starch solutions to investigate the change of their properties and analyze the effect of coating on them. The coating of linerboards with oxidized starch resulted in improvement in the properties related to corrugated board properties by increasing fiber bonding and rigidity. The improvement of ring crush strength by coating was greater in inside linerboard than in outside linerboard. Burst index of linerboards rapidly increased with an initial increase of coating weight, but as the coating weight further increased, there was no increase in burst index. Coating on linerboards with oxidized starch at low coating weight improved stiffness of them. There were no significant changes in tearing resistance of linerboards by coating of oxidized starch. The coating resulted in increase in air resistance and sizing degree of linerboards.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.11-20
• /
• 2001

To investigate weathering and surface characteristics of coating film on lumbers coated with Hwangchil(varnish of Dendropanax morbifera), we carried out to investigate the resistance against discoloration, value of crack and surface characteristics of coating films on seven domestic lumbers and those of four introduced tropical lumbers. There was investigated to evaluate the properties of coating films by the varnish of Dendropanax morbifera. There was insignificant correlations between the hardness and moisture contents of each lumber treated by the varnish. There was no significant correlations between the thickness of coating film and the hardness, either. Although we investigated 11 wood species, we found only three species as resistance wood species against discoloration; Diospysos spp., Abies holophylla and Ulmus davidiana. The crack of coaing films was the largest on Zelkova serrata followed by Juglans sinensis, Cercidiphum japonicum, Tectona grands, Ulmus davidiana, Guibourtia tessmannii, Diospysos spp. and Dalbergia latifolia. However, there was no crack of coating films on the lumbers of Juniperus rigida, Prunus serrulata var. spontanea and Abies holophylla. The crack of coating film showed positive correlations with the thickness of coating film and hardness. The surface characteristics of the coating films evaluated on the basis of $R_{a}$ values indicated the lumbers of Ulmus davidiana($0.14{\;}{\mu}m$), Juniperus rigida($0.1 5{\;}{\mu}m$), Guibourtia tessmannii($0.19{\;}{\mu}m$), Dalvergia latifolia($0.20{\;}{\mu}m$) and Diospysos spp.($0.20{\;}{\mu}m$), Cercidiphum japonicum($0.24{\;}{\mu}m$) as good species while there was insignificant differences between softwoods and hardwoods. Tectona grands, Prunus serrulata var. spontanea and Abies holophylla showed rough surface with $1.53~2.63{\;}{\mu}m$ of $R_a$ values. The four kinds of rough indices($R_a,{\;}R_z,{\;}R_{max}{\;}and{\;}R_q$) showed very low correlations with moisture contents with the correlation coefficients. The $R_a{\;}and{\;}R_{max}$ also showed slight relationship with hardness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2012

This study was carried out in order to analyze a repletion possibility about color change of base paper after elevated heat exposure when wooden fillers were added. Fillers may reduce production cost because its price is usually inexpensive than pulp with higher bulkiness. Wooden fillers have lower density than inorganic fillers, so they may increase bulk more than inorganic fillers. Never the less wooden fillers have disadvantage of yellow color by heat exposure, so the addition level should be carefully controlled. Brightness and whiteness changes after elevated heat exposure depending on coating weight were analyzed. With wooden fillers addition, breaking length and surface strength decreased but bulkiness increased. As the exposure time of elevated heat increased the coating paper with wooden fillers addition had higher brightness and whiteness values than those of inorganic fillers.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.75-82
• /
• 1997

To improve the quality of coated paper, the continuous research to the coating components and development of alternative latices is required. Recently, amphoteric latex is getting a great concern due to their changable properties of surface charge through controlling pH and some methods have been tried to prepare amphoteric latices. This study was carried out to synthesize amphoteric latex using seeding polymerization method with low concentration emulsifier. Styrene was used as a main monomer in addition to acrylonitrile for a hydrophilic comonomer. acrylic acid for a anionic comonomer and N,N-dimethylaminoethyl methacrylate for a cationic comonomer. Particle size and viscosity of latex were greatly affected by addition of acrylic acid and ammonium persulfate as an initiator. Negative charge of latex in alkali condition was changed to zero to positive charge in around pH 4.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.31-38
• /
• 1999

This paper deals with a coating technique of hardening surface layer of softwood{Larix leptolepis) flooring board to improve its surface properties such as hardness and abrasion resisitance without spoiling its exellent qualities such as beautiful color tones and great strength. For surface hardening of the wood, polyurethane wood sealer was used as under coat, polyurethane sanding sealer as intermediate coat, and UV-curing epoxy acrylate and urethane acrylate varnishes as top coat. The hardness of the wood was improved by the coating treatment and it was similar to that of high density hardwood such as oak, keruing. The abrasion resistance of the coated wood was greatly improved by UV curing epoxy acrylate or urethane acrylate varnishes. Adhesion properties and impact resisitance of the coated wood surface were also good. It was suggested that the well-coated larch wood could be used as interior flooring board as substitute for hardwood such as keruing.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.14-18
• /
• 2018

The earlier studies on the fire resistance performance of woods used as building materials have focused on confirming combustion characteristics of fire retardant or flame resistant treated wood. In this paper, to confirm internal temperature changes closely related to pyrolysis of woods exposed to the flame, heating experiments were conducted in a heating furnace according to the standard heating temperature curves after Douglas-fir, which is widely used as structural materials, was treated with a flame resistant solution and flame retardant paint. As a result of the experiment, it was confirmed that the thermal diffusion inside the wood has decreased when the wood was treated with the flame resistant solution. However, in high temperature, the flame resistant effect could not be expected due to the peeling of the coating in the case of the flame resistant paint treated wood. Therefore, it can be considered that it is more effective to use the flame resistant solution which penetrates in to the inside of the wood than flame resistant paint which forms the coating on the surface of the wood in order to enhance the flame resistance effect on the thick wood.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.16-21
• /
• 2014

Characteristics of coating color penetration into paper were elucidated using various types of pulps and pigments. A commercial paper, KP and TMP handsheets were used for base paper. Clay and GCC were used as coating pigment. Laboratory rod draw down coater was used for coating application. Coating color penetration was evaluated by measuring the roughness of surface and back side of a coating layer. The results of coating roughness showed that clay was much better than GCC as a coating pigment. In case of pulp type, KP base paper was more effective than TMP base paper to reduce coating penetration.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.3
• /
• pp.173-182
• /
• 2023

Color is an attribute of visual perception and can be an important factor that affects the preference of customers toward bamboo and wood products. Solar radiation can discolor bamboo surfaces and initiate cracking. The purpose of this study is to investigate the effects of an ultraviolet (UV)-protective coating on the photodiscoloration of untreated and heat-treated Phyllostachys bambusoides bamboo surfaces. Artificial UVA radiators are set at a UVA irradiance of 2,000 W/m² to accelerate the aging of the outer surfaces of hot-air-dried and heat-treated bamboo samples. Half of the samples are coated with transparent UV-protective paint. As the UVA radiation progresses, the discoloration prevention efficiency (DPE) of the UV-protective coating on all samples decreases gradually. The DPEs of the hot-air-dried samples are estimated to be 31.4% and 18.8% after 21 and 72 hours of artificial UVA radiation, respectively. The heat-treated samples exhibit similar trends (29.0% after 21 hours and 10.3% after 72 hours). Recoating the UV-protective paint periodically every six months is expected to minimize the discoloration of the bamboo's outer surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.21-26
• /
• 2013

The influences of heat treatment and surface sizing on coating penetration were studied using two types of commercial base papers. Dry oven was used for heat treatment and laboratory rod draw down coater was used for surface sizing and coating application. Coating penetration was evaluated by measuring the roughness of the backside of coating layer. The backside of the coating was exposed by dissolving the fibers in a cupriethylenedimine(CED) solution. The results showed that both heat treatment and surface sizing were the effective methods to increase sizing degree and to reduce coating penetration.