발열량이 낮은 저등급 석탄이나 황함량이 많은 petroleum-coke는 그 이용이 제한적이지만 공급이 풍부하여 잠재력이 큰 에너지원이므로, 가스화공정에 적용하여 고급연료인 수소나 액체연료를 생산할 수 있다. 본 연구에서는 상압의 열천칭 반응기(thermobalance)에서 wood chip, 저등급 석탄인 갈탄, 역청탄, 무연탄, pet-coke의 수증기 가스화 반응특성을 조사하였다. 가스화 온도 $600{\sim}850^{\circ}C$, 수증기 분압 30~90 kPa의 범위에서 조업변수들이 가스화반응속도에 미치는 영향을 조사하였다. 기체-고체 반응모델로서 modified volumetric reaction model을 적용하여 가스화반응의 거동을 묘사하고 가스화공정에 필수적인 kinetic 정보를 도출하였다. 저등급탄인 갈탄과 바이오매스인 wood chip은 휘발분 함량도 높고 비교적 높은 가스화반응속도를 보여 가스화반응공정에 적합한 연료이다. Arrhenius plot으로부터 활성화에너지는 wood chip, 갈탄, 역청탄, 무연탄, pet-coke에 대해 각각 260.3, 167.9, 134.6, 82.2, 168.9 kJ/mol으로 구해졌다. 각 연료에 대하여 수증기 가스화반응의 반응차수를 결정하였으며, 가스화공정 설계의 기초데이타로서 겉보기 반응속도식을 제시하였다.
Combustion Characteristics of the wood chips(balsa chips) were experimental studied as fundamental investigation of the thermal recycle system of the urban dust. The urban dust contains plastics vegetable and lot of wood material. Then, a wood was chosen as an example of the component of urban dust. A small wood chip was burned in a electric furnace and mass reduction rate during volatile and combustion states were recorded by the micro-electric balance and the combustion flame shape took a photograph by video camera at the mass of wood chips and ambient temperature in the furance. Ignition delay took the minimum value when the mass of the test chip was 0.3g. When a mass of the test chip was smaller then 0.001g, combustion with flame did not burnt.
This study aims at modeling the rotary drying of wood chips in co-current mode and estimating the drying time of larch (Larix kaemferi) wood chip. Drying data were obtained in a lab. scale fixed bed dryer operating with an air velocity of 1 m/sec. and at hot air inlet temperatures of $100^{\circ}C$, $200^{\circ}C$, and $300^{\circ}C$. The lab. scale fixed-bed drying rates for small, medium and large size larch wood chips that had been dried from 40% wet-based moisture content (MC) to 10% MC at $200^{\circ}C$ drying temperature were 17.3 %/min., 10.2 %/min. and 5.5 %/min., respectively. It was predicted that larch large size wood chips could be dried from 40% MC to 10% MC in about 23.0, 34.6, and 44.7 minutes at $300^{\circ}C$, $200^{\circ}C$ and $150^{\circ}C$, respectively. Expected drying times for medium size chips were about 8.6, 11.2 and 13.2 minutes and those for small size chips were 4.3, 5.5 and 6.4 minutes, respectively.
There have been many studies of combustion in the circulating fluidized bed. However, little study is available for combustion of wood pellet together fed with wood chip. The mixed ratio of two fuels is an useful information when thermal power company would receive the Renewable Energy Portfolio Standard (RPS) from government. In this study, the combustion behavior and kinetics of such biomass fuels are evaluated using fluidized bed reactor and thermogravimetric analyzers. The mixing ratio of wood chip relative to wood pellet was varied at different temperatures. The results show that a combustion reactivity changed significantly at the wood chip mixing ratio of 40%, particularly at low temperature condition.
This study was conducted to develop recycle revegetation methods for the restoration of the steep slopes by using fresh wood chip from construction sites. In general, the fresh wood chips can be used as soil media for the restoration works, because they can increase infiltration of rainfall and give enough porous to breathe and elongate for the root growth as well as economic value. The experiment was carried out to compare the effect of fresh wood chips from different mixing with soil, organic material and macromolecular compound which used for slope restoration works conducted by Hyunwoo green(Ltd.). The main results by monitoring for two years are summarized as follows; 1. The soil media made with low percentage of fresh wood chip covered quickly by herb plants. Especially, the soil mixture Type C (wood chip 20%) showed 80 percent ground coverage within two months after seeding. 2. The soil mixture type E (wood chip 40%) and type F (wood chip 50%) which contains more fresh wood chips than soil type C was under 30 percent ground coverage because wood plants are germinated well. If the restoration works aims at making forest, then the soil type E and F would be recommended than using soil type C. 3. Among the woody plants, Ailanthus alfissima, Pinus rigida, Pinus densiflora, and Albizzia julibrissin showed high percentage of germination rates and vigorous growth. In case of shrubs, Lespedeza cyrtobotria and Indigofera pseudo-tintoria scored high percentage of germination rates. 4. In native plants, Chrysanthemum indicum, Artemisia princeps, Lutos corniculatus and Imperata cylindrica showed high percentage of appearance. In case of introduced herbs, Coreopsis lanceolata, Coreopsis tinctoria and Oenothera oborata grew so vigorously. 5. The soil types which including fresh wood chips over 30-40 percentage showed the most diverse plant composition and the most effective germination rates and growth pattern with woody plants. 6. This works to develop recycle revegetation methods using fresh wood chips need more efforts for monitoring the exact effect of fresh wood chips as the soil media.
The effect and control of wood property of reconstituted composite panels for improved board properties by wood-waste materials and development of combination method for heterogeneous materials have been of interest to the wood science researchers. The purpose of this study is to consider the properties in relation to hot pressing conditions and to develope the optimum hot pressing condition with waste wood and waste tire for the manufacturing of composite boards. The study of composite boards for recycling of wood and waste tire is nothing up to the present. Physical and mechanical properties such as specific gravity, moisture content, swelling coefficient, modulus of rupture and modulus of elasticity in bending test were studied. The condition of 3-stage press time for the lowest moisture content of composite board was $4{\rightarrow}3{\rightarrow}3$ minutes. Specific gravity of composite panels was affected mainly by the amount of rubber chip. Because of the low rigidity and high elasticity in rubber chip, it is considered the composite panel was adequate material in the place of compression load, but not bending load. Therefore, it was concluded that a use of rubber-based wood composite panel is proper to the interior materials such as floor a room than exterior materials. From the test results, the most optimum hot pressing conditions were $4{\rightarrow}3{\rightarrow}3$ minutes for 3-stage press time and $45{\rightarrow}20{\rightarrow}5kg/cm^2$ for 3-stage press pressure. The rubber-based wood composite panel was very excellent in elasticity by combination of rubber chip in comparison with existing other wood-based materials. Therefore, it was considered that rubber-based wood composites can be applicable to every interior materials such as floor a room and will be expected to effective reuse and recycle of waste tires and wood-waste materials, and will be contribute to protection of environment pollution in earth.
Wood chip을 support로 충전한 관형발효조에 Saccharomyces formosensis 효모용액을 통과시켜 고정화한 관형발효조에서 연속 발효실험을 수행한 결과 wood chip은 support로서 높은 효모 고정화율을 나타내었다. 관형발효조에서 발효실험시 유량 및 농도의 변화시 정상상태에 도달하는데 약 60시간 소요되었고, 정상상태에서 ethanol수율은 0.473-0.483로서 회분식 발효조 경우보다 높은 값을 나타냈다. 정상상태에서 ethanol생산성 (공간체적 기준)은 ethanol농도 61.4-65.7 g/l 범위에서 24.4-19.1g EtOH/$\ell$.hr를 나타내어 다른 고정화법에 의한 것과 비슷하게 높았다. 관형발효조에서 410시간 연속 발효운전시 오염현상이 없었고 효모생존율은 88-93%로 유지되었다.
본 연구에서는 국내에서 자생하는 백색부후균인 겨울우산버섯(Polyporus brumalis)을 소나무 시편에 배양하여 목재 처리에 의한 리그닌 분해효소의 활성변화를 조사하고 목재의 분해가 일어나는 동안 중량감소율 및 리그닌 감소율을 통해 분해능을 확인하고 여기에 관여하는 유전자의 발현을 조사하였다. SSC (Shallow Stationary Culture) 액체배지에 목재 시편을 넣고 겨울우산버섯을 배양하였을 때 무처리구에서는 laccase의 활성이 20일 이후 감소하는 반면, 시편 처리구에서는 활성이 계속 증가되었다. 특히, 60일 전후의 처리구에서 무처리구에 비해 10배 이상 높은 활성을 나타내었다. 또한, 겨울우산버섯에 의한 소나무칩의 중량 감소율과 리그닌 감소율은 80일 후 각각 23.4%와 6.3%로 나타났다. 40일 배양한 목질칩에서 분리한 겨울우산버섯의 pblac1의 유전자 발현은 무처리구에 비해 소나무 칩 처리구에서 약 3배 정도 높게 나타났다. 이상의 결과로 백색부후균에 의한 목재칩 처리에 의해 리그닌 분해효소의 활성이 증가되며 pblac1이 리그닌 분해에 중요한 역할을 하는 것으로 보여진다. 따라서 백색부후균의 리그닌분해효소 유전자 발현을 조절함으로써 리그닌 분해능이 우수한 균주 개발이 가능하고 목질에탄올 생산 전처리에 효율적으로 이용할 것으로 기대된다.
Wood biomass, such as sawdust, particles, and chips from the wood industry, can be potentially used as a composite product. Chip block pallets (CBP) are composite products that can be produced from industrial wood waste and are in high demand in the logistics sector. Therefore, this study aimed to investigate the production of CBP from teak wood biomass with varying polyurethane contents. In addition, this study analyzed the optimum particle-size composition was determined. The CBP production of CBP be divided into two stages. The first stage evaluated the use of polyurethane adhesive content, whereas the second stage considered the effect of particle size composition. The 9 × 9 × 9 cm3 of CBP with 0.6 g/cm3 target density was fabricated using a cold press. The National Wooden Pallet and Container Association (NWPCA) standards were used to evaluate the density, moisture content, dimensional stability, water absorption, compressive strength (CS), and screw-holding strength (SHS) of our CBP products. The mechanical and physical properties of CBP products were investigated. As a result, the CBP sample prepared using 4-14 mesh particle size and 4.5% adhesive content showed the optimal strength values, such as CS of 14.67 MPa and SHS of 371.50 N. These findings demonstrate that the CBPs derived from teak wood waste closely resemble commercial chip blocks and have the potential to replace wood bearings as pallet pads.
본 연구는 낙엽송을 이용한 반탄화 펠릿의 제조 가능성을 확인하기 위하여 수행하였다. 낙엽송 칩을 230, 250, $270^{\circ}C$ 및 30, 50, 70분의 조건에서 반탄화 처리를 각각 실시하였으며, 반탄화 낙엽송 칩의 함수율, 수분흡착률, 발열량, 회분을 측정하여 각 조건에 대한 반탄화 조건의 영향을 분석하였다. 또한 반탄화 낙엽송 칩의 표면을 광학현미경, FE-SEM, SEM-EDXS를 이용하여 관찰하였다. 낙엽송 시편의 리그닌 함량은 반탄화 온도 및 시간 증가와 함께 증가한 반면, 전섬유소 함량은 감소하였다. 함수율은 반탄화 처리하지 않은 칩과 비교하여 급격히 감소하였으며, 수분흡착률은 반탄화 온도가 높을수록 감소하였다. 낙엽송의 발열량 및 회분함량은 반탄화 온도가 높아짐에 따라 증가하였으나, 반탄화 낙엽송 펠릿의 내구성은 무반탄화 낙엽송 펠릿과 비교하여 현저히 낮았다. 낙엽송 칩의 단면을 광학현미경 및 FE-SEM으로 관찰한 결과 반탄화 조건이 강해질수록 재색의 농색화 및 세포벽의 부분적 붕괴를 확인할 수 있었으며, SEM-EDXS 분석을 통하여 반탄화에 따른 리그닌의 분포 확산 및 양의 증가가 확인되었다. 결과를 종합하면, 연료적 특성의 측면에서 $270^{\circ}C$/50분이 낙엽송의 최적 반탄화 조건인 것으로 판단되나, 낙엽송 반탄화 펠릿의 내구성 결과에 따르면 $230^{\circ}C$/30분과 같이 반탄화 처리조건이 강하지 않은 경우에 대하여 고려할 필요성이 있을 것으로 생각한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.