• 한국식품영양학회지
• /
• 제12권1호
• /
• pp.55-62
• /
• 1999

Changes in the alliinase activity during the aging of pickled garlic samples prepared by the several methods were investigated. The activity of alliinase in raw garlic was 8,37 units/mg protein. The ac-tivity in the garlic pickled with swoy sauce was reduced to 4.57 units/mg with 52% remaining by 1st week of pickling and to 1.05 units/mg protein with 12% remaining by 2nd week of pickling. The ac-tivity of alliinase in the garlic pickled with vinegar was 2.79 units/mg protein with 32% remaining by 1st week of pickling and was 0.26 units/mg protein only with 3% remaining by 2nd week of pickling. The activity of alliinase in the garlic pickled with 10% salt solution was 5.06 units/mg protein with 58% remaining by 1st week of pickling. After one week pickling the juice of pickled garlic was removed. Then garlics were pickled again with vinegar. The allinase acting in was reduced to 0.85 units/mg pro-tein with 10% remaining by 2nd week of pickling. The activity of alliinase in the garlic pickled with vin-egar was 2.79 units/mg protein with 32% remaining by 1st week of pickling. The juice of pickled garlic was removed after one week. Then the galics were again pickled with saysauce. The allinase activity in the garlic the garlic pickled again with soy sauce was reduced to 0.43 units/mg protein with 5% remain-ing by 2 week of pickling.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.124-130
• /
• 2015

In many inventory situations, items for sales are generally stocked in a multiple of variations called stockkeeping units, such as size, color, style, and so on. For better management performance on sales items, proper and effective management is necessary for the stockkeeping units. In dealing with many items and those stockkeeping units, individual inventory analysis for each stockkeeping unit needs large amount of time or cost. Also the individual approach in inventory planning increases the demand variation of an item as the result by combining of demand variations of all stockkeeping units, accordingly the inventory turnover ratio and profitability are dropped down. This research suggests an effective method of systematic control of total stockkeeping units by generating from the total item basis, and shows how to reduce the safety stock and the average inventory with attaining a planned customer fill rate of the item and each stockkeeping units.

• 한국초등과학교육학회지:초등과학교육
• /
• 제23권1호
• /
• pp.27-36
• /
• 2004

This paper aims to examine how well university students, who are going to be primary school teachers, understand the International System of Units (SI), focusing on seven basic units such as 'm', '㎏', '㏖', 'A', 'K', 's', 'cd'. This study specifically investigates whether the students know the seven units and understand their uses and how they read and learn them. The subjects were 1030 students from the University of Education in Jinju, Geongsangnamdo. Data was collected through a questionnaire which was designed by this researcher and checked by an authority, and the frequency and percentage of reponses to each question were obtained and analysed. Findings show all the students knew very well that 'm' and '㎏' are included in the seven units, compared to the others which low percentage of the students considered as the elements. In terms of understanding of use, the units of the length 'm', the mass '㎏', and the time 's' are well understood, presumably, because they are often used in ordinary life and school, while the amount of substance '㏖', the electric current 'A', the thermodynamic temperature 'K', and the luminous intensity 'cd' are not as well understood. It is probably because 'A', 'cd', and 'K' are hardly used in everyday life. With respect to reading the units, the subjects read 'm', '㎏', '㏖', and's' much better than the others. As for the source of learning them, most students answered they learned them in schools, which implies school education is very important. From these results it is concluded that school education should be accompanied with use in everyday life for understanding and using the units. SI Base Units understanding was investigated by an academic year. According to this investigation, generally the right answer rate differed 4<2<3<1 by an academic year in order. For the Senior, Sophomore appeared the right answer rate more high. because, they learned before in deepening or elementary course on chemistry and physics related with SI Base Units. On the other hand, for the junior answered low rate by this reason that they couldn't remember about SI Base Units that learned before. For the Freshman appeared low rate by this reason that they were not learned or graduated from the department of liberal art in high school.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1268-1273
• /
• 2011

The study on power capacity increase of superconducting fault current limiter (SFCL) is one of the most important researches to apply a SFCL in the power system. To achieve this, we thought that the unbalanced quenching problem generated in series connection of superconducting units should be solved. In this paper, we investigated the quenching characteristics of superconducting units in the transformer-type SFCL with or without the neutral line between secondary windings and superconducting units. In case of transformer-type SFCL without neutral line, the connection structure of superconducting units is identical to that of the resistive-type SFCL connected in series. Therefore, the unbalanced quenching was occurred by difference of critical current between superconducting units. However, in case of transformer-type SFCL with neutral line, the superconducting units with different critical current were simultaneously quenched. It was because the currents induced by secondary winding were separately flowed through the superconducting units. By these results, we confirmed that the resistances and consumption powers of the superconducting units were equally generated.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.79-84
• /
• 2009

In order to increase the capacity of the superconducting fault current limiter(SFCL), the current and voltage grades of the SFCL must be increased. As a method for the increase of the current and voltage grades of the SFCL, we compared the various characteristics between the flux-lock type SFCL "With three superconducting units connected in series and the transformer type SFCL using the transformer with three secondary circuits. One of three superconducting units had not quenched in the flux-lock type SFCL. Therefore, the unbalanced power burden happened because of the voltage difference generated by unbalanced quenching between the superconducting units. In the meantime, the three superconducting units were all quenched in the transformer type SFCL using the transformer, and the voltage difference generated between the superconducting units was decreased. Therefore, the difference of critical characteristics was complemented by distribution of fault current in accordance with the turn's ratio between primary and secondary windings. The unbalanced power burden of the superconducting units was reduced due to flux-share between the superconducting units in the transformer. In conclusion, the capacity increment of the SFCL using a transformer was easier due to equal distribution of voltages generated by simultaneous quench of the superconducting units. We think that the characteristics is improved more because of the decrease of saturation in the iron core if the secondary winding is increased in the SFCL using the transformer.

• Computers and Concrete
• /
• 제23권2호
• /
• pp.97-106
• /
• 2019

This paper describes the design of a new interlocking masonry system, the production of designed interlocking units and mechanical properties of interlocked masonry assemblages with mortar. In this proposed system, units have horizontal and vertical locks to integrate the units to the wall and have a channel to enable the use of horizontal reinforcements in the wall. Using these units, unfilled, filled or reinforced walls can be constructed with or without mortar. In the production of the interlocking units, it was decided to use foamed concrete. 12 trial productions have been carried out at different mix proportions to obtain the optimum concrete mix. At the end of the mentioned productions, the units were produced with foam concrete which is selected as the most suitable in terms of compressive strength and specific gravity. Then, axial compression, diagonal tension and bed joint shear tests were carried out to determine the mechanical properties of the interlocked masonry assemblages with mortar. Results from the tests showed that interlocks designed to strengthen the system against shear stresses by creating discontinuity throughout the joints have been successful to achieve their aim. Obtained data will enable structural analysis of walls to be constructed with these new units.

• 대한방사선기술학회지:방사선기술과학
• /
• 제14권1호
• /
• pp.29-44
• /
• 1991

A Study on the distribution and types of the total 40 CT units, as of 1st October 1990, in Pusan area(29 for whole body CT units, 11 for brain CT units) were carried out during the period from January 1989 to December 1989 to find out the status of operation and utilization of whole body CT units. The results were as following ; 1. As of 1st October 1990 in Pusan area, a total of 40 CT units(29 for whole body CT units, 11 for brain CT units) were set up and operated. The number of cases of CT examination performed per day per unit were appeared to be less than 5 cases among 59.5% of CT units, and 2.7% of the total units has peformed more than 16 examinations. 2. The CT units under operation occupied 93.5% of the total and 2.6% of the total units was not properly been operated due to mechanical breakdown. This results is appeared to be better than other reports. 3. The average number of scanning per week for each CT were 35 cases and the average days under operation of the unit per week were 6.7 days. Consequently, the average days under operation of units was higher than that of the other reports, but the average number of scanning was lower. 4. The cases referred from other institutes to hospitals were 6.4% of total cases. 5. As a site of scanning, the brain appeared most frequently with 71.2% of the total cases and followed by spine 12.4%, abdomen 8.5%, and thorax 3.6%, respectively. 6. Positive rate by scanning was 70.8% of total cases, and it was 98.9% with thorax, abdomen 96.3%, spine 93.1%, and brain 38.4%, respectively. According to the results of this study, it is highly recommended that the regulations and the guidelines for setting-up of such high cost medical equipments as CT units be provided in order to ensure the cost-effectiveness of the system.

• 환경위생공학
• /
• 제22권1호
• /
• pp.57-66
• /
• 2007

Changes in the alliinase activity during the hot air drying and vacuum freeze drying of garlic samples treated as the whole, sliced and crushed state were investigated. The specific activity of alliinase in raw garlic was 8.52 units/mg protein. The activity in the whole garlic prepared by the hot air drying for 8 hrs was reduced remarkably to 5.22 units/mg protein with 61% remaining and to 4.25 units/mg protein with 50% remaining for 36 hrs. The activity in the sliced garlic prepared by the hot air drying for 36 hrs was reduced to 3.55 units/mg protein with 42% remaining and the activity in the crushed garlic prepared by the hot air drying for 36 hrs was reduced to 3.12 units/mg protein with 37% remaining. The garlic sample sliced or crushed was higher than the whole state in the efficiency of drying but was lower in the remaining activity of alliinase. The activity in the whole garlic prepared by the vacuum freeze drying for 8 hrs was reduced to 7.21 units/mg protein with 85% remaining and to 5.53 units/mg protein with 65% remaining for 36 hrs. The activity in the sliced garlic prepared by the vacuum freeze drying for 36 hrs was reduced to 4.55 units/mg protein with 53% remaining and the activity in the crushed garlic prepared by the vacuum freeze drying for 36 hrs was reduced to 4.16 units/mg protein with 49% remaining. The remaining activity of alliinase in the garlic samples prepared by the vacuum freeze drying was higher than the remaining activity in the garlic samples prepared by the hot air drying.

• 대한수학교육학회지:학교수학
• /
• 제19권2호
• /
• pp.385-403
• /
• 2017

본 연구에서는 초등학교 수학 교과서의 들이와 무게의 단위에 대한 내용을 단위, 단위 사이의 관계, 표준 단위의 필요성으로 세분화하여 분석하였다. 분석 결과, 단위와 관련하여 제5차 수학 교과서부터 2009 개정 수학 교과서까지 교과서에 제시된 단위의 표현, 단위의 표기, 단위의 종류, 단위의 기본량의 제시 방식에 차이가 있는 것으로 드러났다. 또한 2009 개정 수학 교과서의 내용은 국제단위계와 대체적으로 일치하지만 물의 무게를 통해 1kg을 정의하는 방식이 국제단위계와 차이가 있는 것으로 나타났다. 단위 사이의 관계와 관련하여 교과서에서는 대체적으로 단위 사이의 관계를 글로 제시하고 있었으나 2009 개정 수학 교과서에는 발문과 그림을 통해 그 이해를 돕는 것으로 나타났다. 마지막으로 표준 단위의 필요성과 관련하여 초등학교 수학 교과서에 임의 단위의 불편함을 통해 표준 단위의 보편성, 편리성을 모두 인식할 수 있는 활동이나 발문이 필요한 것으로 나타났다. 이 결과를 토대로 교과서에서 들이와 무게의 단위 제시에 관한 시사점을 제공한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.836-839
• /
• 2003

In this paper, we implement a language model by a bigram and evaluate proper smoothing technique for unit of low perplexity. Word, morpheme, clause units are widely used as a language processing unit of the language model. We propose VCCV units which have more small vocabulary than morpheme and clauses units. We compare the VCCV units with the clause and the morpheme units using the perplexity. The most common metric for evaluating a language model is the probability that the model assigns the derivative measures of perplexity. Smoothing used to estimate probabilities when there are insufficient data to estimate probabilities accurately. In this paper, we constructed the N-grams of the VCCV units with low perplexity and tested the language model using Katz, Witten-Bell, absolute, modified Kneser-Ney smoothing and so on. In the experiment results, the modified Kneser-Ney smoothing is tested proper smoothing technique for VCCV units.