• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1098-1107
• /
• 2011

As recent integration of wire and wireless networks and the convergence of telecommunications and broadcasting, uniform and standardized by the broadcasting operators of existing stations to provide 4A(Any-time, Any-where, Any-device, Any-contents) services for the next-generation of multimedia services research is being progressed. Demand for theses next-generation multimedia services to ensure video compression coding technology, as well as mobility, ability to operation a variety of devices, characteristics and performance of user network and the status and conditiion, user preferences and context-awareness based on the technology has an interest in technical studies. In this paper, the current internet environment, SVC(Scalable Video Coding) encoded by a mixture of multicast and overlay multicast transmission technology for broadcasting services by designing and efficient multimedia broadcasting system is proposed. In addition, ACK-Aow Optimization by overlay multicast scheme existing tree-based overlay multicast, and by comparing the effectiveness of the proposed algorithm is demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.745-750
• /
• 2008

In a cognitive radio based system, quality of service (QoS) for the secondary user must be maintained as much as possible even while that of the primary user is protected all he time. In particular, switching wireless links for the secondary user during the transmission of multimedia data causes delay and information loss, and QoS degradations occur inevitably. The efficient resource management scheme is necessary to support the seamless multimedia service to the secondary user. This paper proposes a novel frequency selection method based on Multi-Criteria Decision Making (MCDM), in which uncertain parameters such as received signal strength, cell load, data rate, and available bandwidth are considered during the decision process for the frequency selection with the fuzzy set theory. Through simulation, we show that our proposed frequency selection method provides a better performance than the conventional methods which consider the received signal strength only.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.425-432
• /
• 2014

The Enhanced Distributed Channel Access (EDCA) function of IEEE 802.11e standard defines contention window (CW) for different Access Category (AC) limits to support Quality-of-Service (QoS). However, it have been remained the problem that the collision probability of transmission is increasing in congested network. Several different solutions have been proposed but the collision occurs among same priority queue within the same station to compete the channel access. This paper presents an APCA (Advanced Priority Collision Avoidance) algorithm for EDCA that increases the throughput in saturated situation. The proposed algorithm use reserved field's bits of FC(Frame Control) using IEEE 802.11e standard's RTS/CTS (Request to Send / Clear to Send) mechanism to avoid data collision. The simulation results show that the proposed algorithm improves the performance of EDCA in packet loss. Using Jain's fairness index formula, we also prove that the proposed APCA algorithm achieves the better fairness than EDCA method under network congested condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.125-132
• /
• 2017

Vehicular safety service reduces traffic accidents and traffic congestion by informing drivers in advance of threats that may occur while driving using vehicle-to-vehicle (V2V) communications in a wireless environment. For vehicle safety services, every vehicle must broadcasts a Basic Safety Message(BSM) periodically. In congested traffic areas, however, network congestion can easily happen, reduce the message delivery ratio, increase end-to-end delay and destabilize vehicular safety service system. In this paper, to solve the network congestion problem in vehicle safety communications, we approximate the relationship between channel busy ratio and the number of vehicles and use it to estimate the total network congestion. We propose a new context-aware transmit power control algorithm which controls the transmission power based on total network congestion. The performance of the proposed algorithm is evaluated using Qualnet, a network simulator. As a result, the estimation of total network congestion is accurately approximated except in specific scenarios, and the packet error rate in vehicle safety communication is reduced through transmit power control.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.589-596
• /
• 2007

Although flooding has the disadvantages like a transmission of duplicated packets and a packet collision, it has been used frequently to find a path between a source and a sink node in a wireless ad hoc network. Clustering is one of the techniques that have been proposed to overcome those disadvantages. In this paper, we propose a new flooding mechanism in ad hoc networks using cluster formation based on the link density which means the number of neighbors within a node's radio reach. To reduce traffic overhead in the cluster is to make the number of non-flooding nodes as large as possible. Therefore, a node with the most links in a cluster will be elected as cluster header. This method will reduce the network traffic overhead with a reliable network performance. Simulation results using NS2 show that cluster formation based on the link density can reduce redundant flooding without loss of network performance.

• Computers and Concrete
• /
• v.8 no.3
• /
• pp.293-309
• /
• 2011

A long-term structural health monitoring (SHM) system comprising over 700 sensors of sixteen types has been implemented on the Guangzhou Television and Sightseeing Tower (GTST) of 610 m high for real-time monitoring of the structure at both construction and service stages. As part of this sophisticated SHM system, 48 temperature sensors have been deployed at 12 cross-sections of the reinforced concrete inner structure of the GTST to provide on-line monitoring via a wireless data transmission system. In this paper, the differential temperature profiles in the reinforced concrete inner structure of the GTST, which are mainly caused by solar radiation, are recognized from the monitoring data with the purpose of understanding the temperature-induced structural internal forces and deformations. After a careful examination of the pre-classified temperature measurement data obtained under sunny days and non-sunny days, common characteristic of the daily temperature variation is observed from the data acquired in sunny days. Making use of 60-day temperature measurement data obtained in sunny days, statistical patterns of the daily rising temperature and daily descending temperature are synthesized, and temperature distribution models of the reinforced concrete inner structure of the GTST are formulated using linear regression analysis. The developed monitoring-based temperature distribution models will serve as a reliable input for numerical prediction of the temperature-induced deformations and provide a robust basis to facilitate the design and construction of similar structures in consideration of thermal effects.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.85-101
• /
• 2015

Objective: The purpose of this study was to develop and evaluate smart secondary controls using iPad for the drivers with physical disabilities in the driving simulator. Background: The physically disabled drivers face problems in the operation of secondary control devices that accept a control input from a driver for the purpose of operating the subsystems of a motor vehicle. Many of conventional secondary controls consist of small knobs or switches that physically disabled drivers have difficulties in grasping, pulling or twisting. Therefore, their use while driving might increase distraction and workload because of longer operation time. Method: We examined the operation time of conventional and smart secondary controls, such as hazard warning, turn signal, window, windshield wiper, headlights, automatic transmission and horn. The hardware of smart secondary control system was composed of iPad, wireless router, digital input/output module and relay switch. We used the STISim Drive3 software for driving test, customized Labview and Xcode programs for interface control of smart secondary system. Nine subjects were involved in the study for measuring operation time of secondary controls. Results: When the driver was in the stationary condition, the average operation time of smart secondary devices decreased 32.5% in the normal subjects (p <0.01), 47.4% in the subjects with left hemiplegic disabilities (p <0.01) and 38.8% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. When the driver was driving for the test in the simulator, the average operation time of smart secondary devices decreased 36.1% in the normal subjects (p <0.01), 41.7% in the subjects with left hemiplegic disabilities (p <0.01) and 34.1% in the subjects with right hemiplegic disabilities (p <0.01) compared with conventional secondary devices. Conclusion: The smart secondary devices using iPad for people with hemiplegic disabilities showed significant reduction of operation time compared with conventional secondary controls. Application: This study can be used to design secondary controls for adaptive vehicles and to improve the quality of life of the people with disabilities.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.345-350
• /
• 2014

According to the necessity of smart working with various mobile devices, and the increasing services based on the converged infrastructures such as Cloud, Wearable Computing, Next Generation Wired/Wireless Mobile Networks, the network reliability has been one of the most important things. However, the research related to the network reliability is still insufficient. To solve these problems, we propose the ISNTC (Intelligent Safe Network Technology based on Cloud), which uses the safe network technique based on SDN, to be adopted to the smart working environments. The proposed ISNTC guarantees secure data forwarding through the synchronized transmission path and timing. We have verified the throughput which outperformed the existing techniques through the computer simulations using OPnet.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.40-49
• /
• 2015

PicoCast is a recently proposed short-range wireless communications technology that supports both low rate sensor/control data and high speed data such as voice and video traffic in the personal space, defined by the user-centric space of radius tens of meters, with one unified protocol. When the users are in the same area, personal spaces defined by each user may overlap. Since these PicoCast piconets may simultaneously operate, mutual interference is unavoidable. It is necessary to investigate the effect of mutual interference on data transmission and to conduct research on minimizing the interference among PicoCast devices. In this paper we analyze the effect of mutual interference between PicoCast piconets based on data throughput using OPNET network simulator. We have implemented the PicoCast protocol and measured the average throughput and packet loss rate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2017

Recently, the demand has continued to increase for higher data rates and improved multimedia services through wireless internet access. In order to increase the data rate and link reliability, 3GPP LTE/A and IEEE 802.16e/m WiMAX systems incorporate MIMO transmission schemes. Since the hardware complexity increases with the number of transmit data streams and mobile devices have limited physical dimensions, an multiple input multiple output (MIMO) ystem with two antennas at both the transmitter and the receiver ($2{\times}2$) is considered to be a possible solution for mobile devices. In this paper, a low-complexity soft output MIMO symbol detector based on Modified-SQRD is proposed for mobile devices with two transmit and two receive antennas.