• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.11-12
• /
• 2011

In electromagnetic coupled resonance(ECR) WPT system, the main key for wireless power transmission is the design method of the ECR coils. The ECR coils is classified to the helical coil(3D) type and the spiral coil(2D) type as a coil structure. The pattern of the spiral coil type has been studied in favor of commercialization. In this paper, the design characteristics of the helical coil and the spiral coil is considered using a Vector Network Analyzer. It is analyzed according to the distance of coupling coefficient between the ECR coils. Also, It is analyzed for the relationships such as the maximum transmission efficiency and the resonant frequency depending on the distance between the coils.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.345-346
• /
• 2008

We analyzed the structural parameters of a guiding coil and a feeding loop for wireless power transfer in mid-range. The length, diameter, and number of turns of the guiding coil are the major factors to determine the resonant frequency. The separation distance between the coil and the loop also affects the power transfer ratio. This scheme has a greater transmission efficiency than using dipoles.

• Journal of electromagnetic engineering and science
• /
• 제4권1호
• /
• pp.8-12
• /
• 2004

In this paper, a triple-band printed dipole antenna using parasitic elements is proposed for the multiple wireless services. The proposed antenna is designed and experimentally analyzed at the bands of PCS, IMT-2000, and ISM services. To achieve triple frequency operation, the proposed antenna contains two parasitic elements, which act as additional resonators by coupling from the driving dipole antenna. From the measured results, the resonant frequencies of this antenna are 1.79 ㎓, 2.03 ㎓, and 2.41 ㎓ and the measured impedance bandwidths are 90 MHz(1760∼1850 MHz), 210 MHz(1,930∼2,130 MHz), and 30 MHz(2,400∼2,430 MHz) for VSWR<2. The measured antenna gains are 2.14 ㏈i, 0.9 ㏈i, and 0.5 ㏈i, respectively. Antenna parameters for trifle-band operation are investigated and several antenna characteristics are discussed.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.259-262
• /
• 2013

This paper analyzes the effects of metamaterial slabs with negative permeability when applied to a two-loop wireless power transmission (WPT) system, both in theory and electromagnetic (EM) simulations. The analysis of magnetic flux focusing provided here assumes quasi-magnetostatics or magnetostatics. The slab structures with negative permeability have been realized using the periodically arrayed ring resonators (RRs) at 13.36MHz. Some examples with ideal lossless slabs of -1, -2, and -3 showed a great enhancement of WPT efficiencies when compared with the free space cases. However, practical lossy slabs made of planar copper RRs did not show significant enhancement of WPT efficiencies due to the relatively high losses in the ring resonator (or in the slab consisting of RRs) near the resonant frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.175-178
• /
• 2002

In This paper, a microstrip slot antenna is designed and fabricated for wireless LAN at 5.8GHz band. The microstrip slot antenna is fed by CPW and formed the inductively slot and tile capacitively slot. To obtain wideband, the inductively slot is designed at 5.3GHz and the capacitively slot is designed at 5.8GHz. Resonant frequency of the fabricated microstrip slol antenna is 5.BCD, the bandwidth for VS%<1.5 is 29% and the gain is 4.6dB. The 3-dB beamwidth of E-plane and H-plane is 80 “ and 120 ”, respectively

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.139-141
• /
• 2019

Capacitive power transfer has an advantage in the simplicity of the energy link structure. So, the conventional phase -shift full bridge sometime is not always the best choice because of its complexity and high cost. On the other hand, the link capacitance is usually very low and requires high-frequency operation, but, the series resonant converter loses zero-voltage switching feature in the light load condition, which makes the switching loss high especially in CPT system. The paper proposes a new low-cost topology based on asymmetric half-bridge to achieve simplicity as well as wide zero voltage switching range. The design procedure is presented, and circuit operations are analyzed and verified by simulation.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.477-483
• /
• 2020

This study proposes a DQ synchronous reference frame model of a series-parallel tuned inductive power transfer (SP-IPT) system. The wireless power transmission system experiences control difficulty because the transmitter-side controller cannot directly measure the receiver-side load voltages and currents. Therefore, a control-oriented circuit model that shows the dynamics of the IPT system is required to achieve a well-behaved controller. In this study, an equivalent circuit model of the SP-IPT system in a synchronously rotating reference frame is proposed using the single-phase DQ transformation technique. The proposed circuit model is helpful in modeling the dynamics of the voltages and currents of the transmitter- and receiver-side resonant tanks and loads. The proposed circuit model is evaluated using frequency- and time-domain simulation results.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.954-963
• /
• 2017

본 연구에서는 공진형 무선전력전송시스템에 의해 발생되는 자기장과 전기장 강도 및 이에 의한 인체 내부 전자파 비흡수율(Specific Absorption Rate: SAR) 분포를 분석하였다. 연구에서 사용된 동작주파수는 ISM 대역에 해당하는 6.78 MHz이다. 실제 시스템을 제작하고, 시스템의 송신측에 공급되는 가용 전력을 1 W로 제한하여 전기장 및 자기장 분포를 측정하고, 동일한 규격으로 시뮬레이션한 결과와 비교하였다. 피부, 지방, 근육의 순으로 조직층이 구성된 단순인체모델을 이용하여, WPT 시스템으로부터의 거리에 따른 인체 내부의 유도 전류밀도와 SAR 분포를 구하였다. 측정과 시뮬레이션을 통해 얻어진 전자파 노출 정도를 ICNIRP(International Commission on Non-Ionizing Radiation Protection)의 국제 권고기준과 비교하여 분석하였다.

• 한국항행학회논문지
• /
• 제16권1호
• /
• pp.27-34
• /
• 2012

본 논문에서는 무선 LAN 2중 대역용(2.4GHz~2.4835GHz, 5.15GHz~5.825GHz) CPW 급전 미엔더 슬롯 루프 안테나를 제안하였다. 요구된 대역의 2중 공진 주파수는 슬롯 루프와 슬롯 폭의 공진 길이의 변화로써 조절되며, 제안한 안테나의 소형화를 위해 슬롯 루프를 구부렸다. 특히, 용량성 결합 CPW 급전 방식은 정합 회로의 추가없이 급전부와 방사부 사이의 간격(offset)으로 전자기의 커플링 양을 조절함으로써 임피던스 정합을 가능하게 한다, 그 결과, 제안된 안테나는 각 대역에서는 10dB 이하의 반사손실과 80%이상의 높은 효율을 가진다. 제안된 안테나의 타당성을 보여주기 위해 시뮬레이션 및 측정 결과를 비교하여 제시하였다.

• 한국정보전자통신기술학회논문지
• /
• 제10권5호
• /
• pp.402-408
• /
• 2017

본 논문에서는 무선 신호전송을 위한 비접촉 방식의 AC 커플링 기반 육각 나선형 박막 인덕터의 주파수 특성을 분석하였다. 사각 나선형 인덕터와 육각 나선형 인덕터에 대하여 권선수 변화, 도체 선 폭 및 선 간격을 변화에 따른 주파수 특성을 비교 분석하였다. 육각 나선형 인덕터는 사각 나선형 인덕터와 비교하여 동일한 인덕턴스를 갖기 위하여 더 많은 권선수를 갖게 되지만 전체적인 도선의 길이는 짧아지게 된다. 이는 자기인덕턴스는 감소하고 상호인덕턴스가 증가하여 전체적인 인덕턴스는 같은 값을 가질 수 있다. 또한 전체적인 도선의 길이가 짧아지고 자기저항이 감소하므로 품질계수와 자기공진주파수의 성능을 확보할 수 있다. 제안된 육각 나선형 박막 인덕터는 2GHz에서 3.54nH의 인덕턴스와 5.0GHz에서 최댓값 14.00의 품질계수를 가지며, 약 11.3GHz에서 자기공진주파수를 가진다.