• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.481-488
• /
• 2011

In this paper, we study a novel wireless interference cancellation system(ICS) repeater based on OFDM system with phase noise analysis and performance evaluation. Recently, there were many researches about wireless repeater. The previous study is just considering the feedback channel cancellation algorithm. But, in wireless repeater system, the phase noise effect can exist at up and down converter of wireless repeater. In wireless repeater system, if there are phase noise effects, the performance of system will get worse. So, the phase noise compensator is needed in wireless repeater. Therefore, we propose adaptive phase noise compensator based on OFDM system in order to effectively cancel phase noise. In order to cancel interference, we adapt adaptive phase noise compensator in wireless repeater system. The adaptive phase noise compensator compensates phase noise effect. Therefore, in this paper, we analyze phase noise of wireless repeater based on OFDM system. In this paper, when phase noise power is -15 dBc and phase noise cutoff frequency is 100 kHz at 4QAM, the BER performance of propose algorithm is better about 4 dB than with adaptive equalizer and without phase noise compensator at $10^{-4}$.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.4
• /
• pp.221-226
• /
• 2018

In this paper, the power transfer efficiency analysis based on the resonant repeater in a magnetic resonance wireless power transfer system is proposed. The efficiency of the magnetic resonance method was verified by comparing the general frequency with the resonance frequency. The resonance repeater was arranged to increase the efficiency and increase the transfer distance. When using resonant repeaters, the maximum efficiency increase is about 36.23[%] and the transfer distance was extended to more than 20[cm]. Through this study, confirmed the effect of using resonance repeaters in wireless power transfer system. As a result, it can be expected that the overall technology related to wireless power transfer system will be more valuable for energy-IT technology.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.503-511
• /
• 2010

WiBro radio frequency (RF) repeater is used for solving the problem of partial shadow areas in the wireless communication field that uses time-division duplexing (TDD) mode. In this paper, a method to efficiently generate TDD signals for WiBro RF repeater is proposed and its digital circuit is implemented. A TDD signal is detected from RF signals transmitted/received to/from RF repeater and then inputted again into the RF repeater, so that it can operate normally. First, the envelope of downlink signals is detected and then clamped to extract the basic form of a TDD signal using an operational amplifier circuit. Next, the TDD signal is generated by restoring and filtering the shape which has been distorted by the wireless channel. The algorithm and system to acquire TDD signal are developed with a goal to have simple but powerful functions with as little cost as possible. The proposed method is implemented as an RF-digital integrated system and verified through the experiments under the same condition as actual WiBro service environment.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.249-252
• /
• 2004

Recently, wireless repeater with interference rejection has been considered for the next generation repeater. In this paper, adaptive interference rejection module suppressing interference in the 3G band is proposed. A novel adaptive rejection scheme is proposed and it is partially implemented by FPGA devices.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.111-117
• /
• 2009

In the wideband code division access (WCDMA) systems, a pilot channel is used to determine WCDMA network coverage, cell identification, synchronization, timing acquisition and tracking, user-set handoff, channel estimation, and so on. A wireless repeater, which is deployed in the urban area for the WCDMA system to meet the growing demand on wireless communication services, has the possibility to receive several pilot signals from a large number of base stations, however, cannot distinguish its service base station's signal among them. This pilot interference results in frequent handoffs in the user equipment, which degrades the radio reception, transmission efficiency, quality of service, and channel capacity and increases the unwanted power consumption. In this paper, thus, we propose a pilot pollution interference cancellation scheme using one of the adaptive estimation algorithms, normalized least mean square (NLMS), which is applicable to a wireless repeater. We carried out link-level and network-level computer simulations to evaluate the performance of the proposed scheme in a wireless repeater. The simulation results verify the bit error rate (BER) improvement in the link level and the call drop probability improvement in the network level.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.277-280
• /
• 2005

In this paper, we propose a frequency synthesizer for dualband repeater. The dual-band RF technology for applications to the wireless repeater for CDMA and WCDMA mobile communications has been developed in this paper. The dualband PLL module consisted of dual-band VCO and one PLL IC has been developed. The main technological efforts for the dual-band PLL module is to suppress the intermodulation distortion by applying the miniature ceramic filter using the slow wave characteristics. The dual-band miniature RF module including dual-band PLL module and one MCU controller is very attractive for applications to the miniature dual-band RF mobile repeaters.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.440-444
• /
• 2007

As the mobile communication service is widely used, the demand for wireless repeaters is rapidly increasing because of the easiness of extending service areas. But a wireless repeater has a problem that the output of the transmit antenna is partially fed back to the receive antenna, which results in feedback interference. In this paper, we propose a new varable step-size LMS algorithm, which utilizes correlation between reference and error signals to adjust the step sizes, for cancelling the feedback interference signals in the WCDMA repeater under time-varying multi-path channels. The proposed algorithm was investigated through computer simualation by being applied to the time-varying channels. The simulation results demonstrated that the proposed one is superior to the conventional ones in terms of cancelation perormance.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.343-344
• /
• 2007

In this paper, we study the signed-DLMS adaptive algorithm of wireless repeater for solving shadow region due to propagation between base station and mobile station. The the signed-DLMS algorithm reduces interference signals from multipath and solves the oscillation problem of repeater by estimation and cancellation. To efficiently reject interference signal, the signed-DLMS adaptive algorithm is applied. The computational complexities of the signed-DLMS are reduced verse standard LMS algorithm. Wireless ICS repeater based on signed-DLMS reduces the cost and is able to increase channel capacities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.565-566
• /
• 2018

Conventional IoT systems are centralized systems that process information from the server on the device and most of them use a wireless LAN network. However, There may arise a problem of when the signal of the wireless LAN network is not reached, the IoT product can not be used and accessing a wireless LAN network having a stronger signal. In order to solve this problem, this paper proposes a system that a method to maintain stability of IoT products by using repeaters, and to manage IoT products and reduces the burden on the server by processing part of the data processed by the server in the repeater. The problems caused by the signal of the wireless LAN network can be solved by amplifying the signal with the repeater, and the overloading problem that can occur in the server can be solved by controlling the repeater's IoT product connected thereto to reduce the server usage.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.57-61
• /
• 2006

As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.