• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.29-39
• /
• 2006

With the increasing popularity of the wireless network, the vulnerability issue on IEEE 802.1x Wireless Local Area Network (WLAN) are more serious than we expected. Security issues range from mis-configured wireless Access Point(AP) such as session hijacking to Denial of Service(DoS) attack. We propose a new system based on intrusion detection or prevention mechanism to protect the wireless network against these attacks. The proposed system has a security solution on AP that includes an intrusion detection and protection system(IDS/IPS) as an embedded module. In this paper, we suggest integrated wireless IDS/IPS module on AP with wireless traffic monitoring, analysis and packet filtering module against malicious wireless attacks. We also present that the system provides both enhanced security and performance such as on the university wireless campus network.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.13-22
• /
• 2005

IEEE 802.11a is a standard for the high-speed wireless local area network (WLAN), supporting from 6 up to 54 Mbps in a 5 GHz band. We propose a channel equalization algerian and a sampling clock recovery algorithm by utilizing the Viterbi decoder output of the IEEE 802.11a WLAN standard. The proposed channel equalizer adaptively compensates channel variations. The proposed system uses re-encoded Viterbi decoder outputs as reference symbols for the adaptation of the channel equalizer. It also extracts sampling phase information with the Viterbi decoder outputs for fine adjustment of the sampling clock. The proposed sampling clock recovery and equalizer are more robust to noise and frequency selective fading environments than conventional systems using only four pilot samples.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.92-98
• /
• 2010

A new wideband bandstop filter(BSF) with a sharp roll-off characteristic is introduced in a stripline structure in this paper. The BSF consists of two sections: the first is two capacitively coupled $\lambda/4$ short-circuited lines with opposite ground positions, while the second is a capacitively coupled $\lambda/4$ short-circuited line. The BSF provides three transmission zeros within the stopband and better than 22 dB rejection over the whole wireless local area network (WLAN) band from 5.15 to 5.825 GHz. The BSF, cascaded to an U.S. ultra-wideband(UWB: 3.1~10.6 GHz) band-pass filter(BPF), is simulated with HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape with a dielectric constant of 7.8. The measurement results agree well with the HFSS simulation results. The size of the UWB BPF including the BSF is $3{\times}6.3\times0.45\;mm^3$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.10
• /
• pp.3458-3474
• /
• 2014

The performance of IEEE 802.11e enhanced distributed channel access (EDCA) is influenced by several interactive parameters that make quality of service (QoS) control complex and difficult. In EDCA, the most critical performance influencing parameters are the arbitration interframe space (AIFS) and contention window size (CW) of each access category (AC). The objective of this paper is to provide a scheme for parameter control such that the throughput per station as well as the overall system throughput of the network is maximized and controllable. For this purpose, a simple and accurate analytical model describing the throughput behavior of EDCA networks is presented in this paper. Based on this model, the paper further provides a scheme in which a Pareto optimal system configuration is obtained via an appropriate CW control for a given AIFS value, which is a different approach compared to relevant papers in the literature that deal with CW control only. The simulation results confirm the effectiveness of the proposed method which shows significant performance improvements compared to other existing algorithms.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.3
• /
• pp.137-144
• /
• 2004

3GPP(3rd Generation Project Partnership)-WLAN(Wireless Local Area Network) interworking refers to the utilization of resources and access to services within the 3GPP system by the WLAN UE(User Equipment) and user respectively. The intent of 3GPP-WLAN Interworking is to extend 3GPP services and functionality to the WALN access environment. We propose an efficient mechanism for the setup of UE-initiated tunnels in 3GPP-WLAN interworking. The proposed mechanism is based on a secret key which is pre-distributed in the process of authentication and key agreement between UE and 3GPP AAA(Authentication, Authorization Accounting) server. Therefore it can avoid modular exponentiation and public key signature which need a large amount of computation in UE. Also the proposed scheme provides mutual authentication and session key establishment between UE and PDGW(Packet Data Gateway).

• Journal of Power System Engineering
• /
• v.12 no.6
• /
• pp.18-23
• /
• 2008

This paper describes development of real-time condition monitoring system to observe state of a container crane in a port. To analyze the state of a crane, the strength and the direction of wind are measured with sensors along with the load resulted a crane at the moment. The measured signals are processed by especially developed conditioning board and converted into digital data. Measured data are analyzed to define the state of the crane at an indicator. For transmission of these data to the indicator, we implemented wireless sensor network based on IEEE 802.15.4 MAC(Media Access Control) protocol and Bluetooth network protocol. To extend the networking distance between the indicator and sensor nodes, the shortest path routing algorithm was applied for WSN(Wireless Sensor Network) networks. The indicator sends the state information of the crane to monitoring server through IEEE 802.11 b wireless LAN(Local Area Network). Monitoring server decides whether alarm should be issued or not. The performance of developed WSN and Bluetooth network were evaluated and analyzed in terms of communication delay and throughput.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2019

With 5G standards proceeding in earnest and increasing demand for services of indoor localization, research on indoor location recognition is being studied in various industrial fields, and research based on fingerprint recognition technology using Wireless Local Area Network (WLAN) is representative. In this paper, we propose an indoor positioning system based on fingerprinting technique that uses Cloud Radio Access Network (C-RAN) architecture and Channel State Information (CSI). In order to improve the performance in indoor positioning, we combined existing fingerprinting method and K nearest neighbor (KNN) technology which is one of the machine running technique. The performance improvements of the proposed indoor positioning system was verified by comparative experiments with the existing localization technique in a indoor localizztion testbed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.4
• /
• pp.193-203
• /
• 2014

This paper implements a weather monitoring system based on wireless sensor network. The wireless sensor network protocol proposed in this paper adopts a TDMA styled MAC. The protocol is designed to balance the energy consumption among sensor nodes. Other purposes of the protocol are to avoid the hidden terminal problem in 2-hop star topology, and to allow a CSMA styled communication in a given time slot to support emergent messages. Also, this paper develops the hardware of sensor node, gateway and electric generator based on solar and windy energy. The test results on the implemented system show that the time slot of each node is shifted in circular manner to balance the waiting time for transmission, and the reliability of wireless communication is over 99%.

• Journal of Integrative Natural Science
• /
• v.10 no.4
• /
• pp.216-224
• /
• 2017

In the terrain of the Korean peninsula, mountainous and flat lands are complexly distributed in small areas. Therefore, local severe weather develops and disappears in a short time due to the influence of the terrain. Particularly in the case of local severe weather with heavy wind that has the greatest influence on aviation meteorology, the scale is very small, and it occurs and disappears in a short time, so it is impossible to predict with fragmentary data alone. So, we use weather radar to detect and predict local severe weather. However, due to the development of wireless communication services and the rapid increase of wireless devices, radio wave jamming and interference problems occur. In this research, we confirmed through the cases that when the radio interference echo which is one of the non-precipitation echoes that occur during the operation of the weather radar is displayed in the image, its form and shape are shown in a long bar shape, and have a strong dBZ. We also found the cause of the interference through the radio tracking process, and solved through the frequency channel negotiation and AP output minimizing. The more wireless devices increase as information communication technology develops in the future, the more emphasized the problem of radio wave interference will be, and we must make the radio interference eliminated through the development of the radio interference cancellation algorithm.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.139-148
• /
• 2006

Recently with the advancement of local wireless communication technologies, digital trends of audio contents and devices are paving the way for new experiences to network-based audio streaming services. In this paper, we present the Wireless Audio Sharing (WASH) technology over Bluetooth and Wireless Local Area Network (WLAN). WASH system provides an audio sharing mechanism over multiple users and also provides stereo audio streaming between Bluetooth-enabled devices and Universal Plug and Play (UPnP) media devices connected to wired/wireless LANs. To achieve these, we extended the Bluetooth audio distribution profile and combined the extended profile with the UPnP AV architecture. With the implementation of this WASH technology, we show some experimental results of the stereo audio streaming in a real environment.