• Journal of Advanced Navigation Technology
• /
• v.22 no.4
• /
• pp.336-341
• /
• 2018

In this paper, we designed and implemented an ultra wideband (UWB) antenna with 5G mobile communication and WLAN bands rejection characteristics. The proposed antenna consists of a planar radiation patch with two slots, parasitic elements on both sides of the strip line and ground plane on back side. The upper n-type slot contributes for 5G mobile communication band (3.42~3.70 GHz) rejection and the lower n-type slot contributes for wireless local area network (WLAN) band (5.15~5.825 GHz) rejection. Parasitic elements were used in order to satisfy the voltage standing wave ratio (VSWR) less than or equal to 2.0 for UWB band (3.10~10.60 GHz) except two rejection bands. The Ansoft's high frequency structure simulator (HFSS) was used for antenna design and simulations. The simulated antenna showed dual rejection bands of 3.36~3.71 GHz and 5.13 ~ 5.92 GHz in UWB band, and measured result for the implemented antenna showed dual rejection bands of 3.40~3.72 GHz and 5.08~5.858 GHz. Simulated and measured VSWRs are less than or equal to 2.0 for all UWB band except dual rejection bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2019

In this study, a triple-band antenna that can be used in WLAN(Wireless Local Area Network) at 2.4 GHz, 5.8 GHz, and 5G at 3.5 GHz is fabricated. The proposed antenna uses a parasitic element to show the triple band, and the reflector is used at a distance of ${\lambda}/4$ from the antenna to reduce the Specific Absorption Rate(SAR). Its dimensions are $100{\times}75{\times}1.6mm^3$ and each parameter value is optimized for better performance and a lower SAR value. As a result, we obtained a bandwidth of 540 MHz(2.02~2.56 GHz), 390 MHz(3.39~3.78 GHz), and 1,210 MHz(5.56~6.77 GHz) based on the reflection loss factor of -10 dB. In addition, the SAR values of the antenna with reflector are observed to reduce below the SAR value of international standard.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.67-75
• /
• 2009

IEEE 802.11 WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Study trends of IEEE 802.11n for high throughput show two aspects, enhanced system throughput using aggregation among packets in MAC(Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PRY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PRY connection. This paper adapts A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer and MIMO in PRY layer for IEEE 802.11n system. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use NS-2(Network Simulator-2) considering MAC and PRY connection for reality.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.365-371
• /
• 2017

IEEE 802.11 Wireless Local Area Network (WLAN) adopts Power Saving Mode(PSM) to save the power. Unlike existing PSM, this paper proposes a new scheme for the power saving of the Mobile Host(MH) when a MH performs the data transmission after the competition-based DCF(Distributed Coordination Function) and competition free-based PCF(Point Coordination Function). In this paper, The proposed scheme estimates the distance between the MH with the authority of data transmission and the Access Point(AP) and then adaptively controls the power of the MH considering the distance. Through the simulation result, we find that the proposed scheme consumes the smaller transmission power and has the similar success rate of packet transmission when it is compared to the existing scheme which uses the same power without the consideration of the distance.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.14-23
• /
• 2014

This paper proposed controlling methods for SDN(Software Defined Network) based multiple radio access technology as the solutions of following two issues which were mainly occurred by explosive increasing of video traffic. The first one is a requirement for traffic off-loading caused by 3rd-party video service providers from the mobile network operator's viewpoint. The other one is a provision of high-speed video contents transmission services with low price. Furthermore, the performance evaluation was also conducted on the real test-bed which is composed of OpenStack cloud and SDN technology such as OpenFlow and Open vSwitch. A virtual machine running on the OpenStack provide a video service and the terminal which is able to use multiple radio access technology supports two 2.4GHz WLANs(Wireless Local Area Network) and three 5GHz WLANs, concurrently. Finally, we can get 820Mbps of the maximum transmission speed by using that five WLAN links for the single service at the same time.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.261-273
• /
• 2008

Multimedia service whose use is rapidly increasing supports effective services to convert and transmit multimedia data based on network speed, noise circumstance, terminal computation, and type of contents for satisfying QoS. For supporting information protection of multimedia service, it offers middle level of singular security service or security mechanism which is based on policy of service provider, depending on present terminal computation and type of contents. It can support security mechanism for more effective multimedia service, if we study security of application layer and network layer for supporting multimedia service. In this paper, we propose Multimedia security framework reflected on quantitative analysis of the WLAN(Wireless Local Area Network) mesh network security using the utility function in the level of the sorority, violation and addictive compensation model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.95-100
• /
• 2011

This paper analyzes the interference effect of WLAN(Wireless Local Area Network) service on WiBro(Wireless Broadband) service in adjacent frequency band by using Monte Carlo method. For the analysis, we make scenario that WLAN service operates on frequency band of 2401 MHz ~ 2423 MHz and WiBro service operates on frequency band of 698 MHz ~ 704 MHz. In case of WiBro receiver is close to WLAN AP(Access Point), the interference will be increased. So, we calculate the protection distance between WiBro receiver and WLAN AP to meet interference probability of 5 % below and required interference power of WLAN AP to meet interference probability of 5 % below in the case of fixed protection distance. As a result, the protection distance of 60 m and -9.5 dBm of required interference power of WLAN AP at 10 m of the fixed protection distance are analyzed.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.352-360
• /
• 2016

In this paper, a novel multiple multicast feed-back scheme for improving multimedia multicast and broadcast system based on IEEE 802.11. The proposed scheme improves multicast PPDU delivery ratio of next generation wireless LAN by utilizing multicast feed-back information. By using the proposed scheme, regardless of its size of multicast group, an AP STA could collect transmission failure information by receiving simultaneous NAK frame. The proposed scheme shows large performance enhancement in broadcast or multicast system of Intelligent Transport System and Passenger Entertainment Service. According to the analysis results, the proposed scheme could enhance wireless LAN multicast and broadcast performance significantly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10A
• /
• pp.839-846
• /
• 2011

Link Adaptation should select the best modulation and coding scheme (MCS) which gives the highest throughput as channel conditions vary. Several link adaptation algorithms for wireless local area network (WLAN) have been proposed but for the future WLAN systems such as 802.11n system, these algorithms do not guarantee the best performance. In this paper, we propose a new link adaptation algorithm in which an MCS level is chosen by the received SNR plus the offset value obtained from the transmission results. The performance of proposed algorithm is simulated by an IEEE 802.11n system. From the analysis, we conclude the proposed algorithm performs better than the well-known link adaptation algorithms such as auto rate fallback and general SNR-based techniques. Particularly, the proposed algorithm improves throughput when the packet error ratio (PER) is constrained for fast fading channels.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.131-138
• /
• 2008

Mobile Ad hoc NETworks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad hoc networks. In this paper, an enhanced routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance named as LRC (Local Route Change) is presented. If the node movement is detected, the routing agent switches path to its neighbor node in LRC. Simulation results show that the performance of the proposed routing scheme is superior to previous AODY protocol.