• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.499-503
• /
• 2005

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network(LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two wall and open space, however, was executed respectively under three circumstances : Where no obstacle, where one wall exists, and where two or more walls exist.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.181-184
• /
• 2004

In this paper, we propose the dual band(2.4GHz and 5GHz) antenna for access point of WLAN(Wireless Local Area Network) which has similar radiation patterns for each band. Simulation results by using HFSS(High Frequency Structure Simulator) for the proposed antenna are presented. The electrical characteristics of the proposed antenna are measured with HP 8510C network analyzer and included. And radiation patterns are measured with rectangular anechoic far field antenna chamber. Measured results show that $S_{11}$ is less than - 14dB and VSWR(Voltage Standing Wave Ratio) is less than 1.5 for all frequency bands of interest. The measured maximum gain for elevation pattern at 2.40GHz is about 2.46dBi at $theta=-78^{\circ}$ and maximum gain for 5.825GHz is about 2.70dBi at $theta=-80^{\circ}.$ And the implemented antenna has good radiation pattern characteristic, therefore, we expect that the implemented dual band antenna is applicable for access point of WLAN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.319-325
• /
• 2015

Remarkable advances in wireless communication technology have enabled communications among people who are far away from each other. In recent, the needs of local area voice communication using a wireless system based on low-cost and simple hardware are rapidly rising. However, since these applications require that the multi-users communicate on the same wireless channel in a small area, the existing voice technologies are not suitable for directly applying to these applications. Therefore, in this paper I propose a novel idea enabling multi-user voice communication. In particular, as a short range wireless solution, I employ the IEEE 802.15.4 based on low power and low cost. However, since originally the standard is not developed for voice communication, we extend the original scheme to be suitable for the voice communication by utilizing the extended concept of GTS. The capacity and validity of the proposed scheme are evaluated through quantitative analysis in various voice compression rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.209-216
• /
• 2005

This paper generally relates to the field of wireless local area networks(WLANs), and more particularly, to AP selection and association methods for the performance of a station. In these days, IEEE 802.11 Wireless LAN network is widely deployed and used as an emerging service to connect high-speed Internet in the public wireless environment. But, if there are many users in hot spot area, they suffer a severe decrease of performance. Thus it needs an association and access control mechanism especially when it is used in the public environment. In this paper, we suggest a selection and association method using Beacon or Probe Response frames based IEEE 802.11. Station selects AP using the information of the capacity area in a Beacon or a Probe Response frame. According to the present paper, an association method for a public WLAN service, which includes a WLAN user terminal and an AP for relaying WLAN communications to and from the user terminal, includes the steps of the user terminal asking the AP's states for access to a radio channel; and the station selects and associates with the AP According to the above-described selection in a high speed wireless Internet service based on public WLAN technologies that are currently in operations. Further, it is possible to improve the efficiency of network management.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.554-557
• /
• 2013

This letter presents a power amplifier (PA) with an on-chip power detector for 2.4-GHz wireless local area network application. The power detector consists of a clamp circuit, a diode detector, and a coupled line directional coupler. A series inductor for an output matching network in the PA is combined with a through line of the coupler, which reduces the coupling level. Therefore, the coupler employs a metamaterial-based transformer configuration to increase coupling. The amount of coupling is increased by 2.5 dB in the 1:1 symmetric transformer structure and by 4.5 dB from two metamaterial units along the coupled line.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2583-2605
• /
• 2016

Fingerprint positioning is a main stream and key technique for seamless positioning systems. In this paper, we develop a performance evaluation testbed for fingerprint based Wireless Local Area Network (WLAN) positioning system. The testbed consists of positioning server, positioning terminal, Access Point (AP) units, positioning accuracy analysis system and testing scenarios. Different from other testbeds tended to focus on testing in same situation, in the proposed testbed, a couple of scenarios are set to test the positioning system including indoor and outdoor environments. Handset-side positioning mode and network-side positioning mode are provided simultaneously. Variety of motion models, such as static model, low-speed model and high-speed model are considered as well as different positioning algorithms. Finally, some implementation cases are analyzed to verify the credibility of the testbed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.27-33
• /
• 2020

Backward compatibility is one of the key issues for radio equipment supporting IEEE 802.11, the typical wireless local area networks (WLANs) communication protocol. For a successful packet decoding with the backward compatibility, the frame format detection is a core precondition. This paper presents a novel frame format detection method based on a deep learning procedure for WLANs affiliated with IEEE 802.11. Considering that the detection performance of conventional methods is degraded mainly due to the poor performances in the symbol synchronization and/or channel estimation in low signal-to-noise-ratio environments, we propose a novel detection method based on convolutional neural network (CNN) that replaces the entire conventional detection procedures. The proposed deep learning network provides a robust detection directly from the receive data. Through extensive computer simulations performed in the multipath fading channel environments (modeled by Project IEEE 802.11 Task Group ac), the proposed method exhibits superb improvement in the frame format detection compared to the conventional method.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.358-361
• /
• 2003

As the information and communication technology has been developed, demand for internet and multimedia is increased and customer's needs becomes diverse. Therefore, the convergence of fixed and mobile networks has emerged. Fixed - Mobile Convergence (FMC) service means that it provides users with one type of services from network access to billing regardless of networks and terminal. FMC service is expected to provide an advanced value with both networks providers and users. Wireless local area network (WLAN) and 2.3㎓ HPi are promising services that will generate enormous demands among FMC services. For that reason, this paper investigates the trend of WLAN and HPi in Korea and abroad and suggests future deployment based on reviewing the literature.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.719-727
• /
• 2016

This paper proposes a unified medium access control (MAC) design methodology and presents the implementation of the IEEE 802.11ac down-link multi-user multi-input and multi-output wireless local area network MAC using the proposed design methodology. The proposed methodology employs unified code for both network simulation and system implementation. Because the unified code closely relates these two processes, the performance of the implemented MAC system can be estimated before implementation. The MAC architecture for an access point implemented using the proposed design methodology is verified on an ARM-based platform, and it is applied to a 65 nm CMOS library.

• Journal of the Korea Society for Simulation
• /
• v.13 no.3
• /
• pp.31-41
• /
• 2004

In this paper, we consider the strategy of Universal Mobile Telecommunication System (UMTS) and Wireless Local Area Network (WLAN) internetworking that provide the seamless vertical handover for mobile nodes. We propose Mobility Anchor Points (MAP) based UMTS/WLAN internetworking architecture to support the vertical handover. Also, on integrated UMTS/WLAN networks, we propose a vertical handover scheme that avoids the call blocking caused by the network resource shortage. We provide the numerical analysis to investigate the performance evaluation to the proposed scheme and compare the proposed scheme with the existing scheme.