• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.62-66
• /
• 2006

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network (LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two walls and open space, however, was executed respectively under three circumstances: Where no obstacle, where one wall exists, and where two or more walls exist.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.702-704
• /
• 2010

Wireless LAN(Local Area Network) environment to support QoS in IEEE802.11 Working Group has standardized on the IEEE 802.11e. IEEE 802.11e EDCA channel access of the high priority traffic as by raising the probability of a chance to support QoS. This is a high priority traffic than low priority traffic, channel access is not necessarily the first. Therefore, as all traffic channels, if you have the same routing path, lower priority traffic on the performance of high priority traffic, sustainable impact. As a result, EDCA, such as voice or video to guarantee QoS for multimedia applications, follow the crowd. In this paper, to solve these problems by using Multi-Interface Multi-Path Routing Algorithm is proposed. Interface for each use in IEEE 802.11e EDCA Access Category much differently by each of the Routing Path for high priority traffic and guarantee QoS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.165-173
• /
• 2010

WMN(Wireless Mesh Network) is an wireless backbone network technology that is an easily configurable network in the low cost compared to the wireless LAN(Local Area Network). Most of the previous researches have evaluated their algorithms by the simulations rather than by the implementation. There exist some implementation papers, however, they have the limitations of the flexibility on the link establishment and the link quality utilization. Consequently, the benefit of the WMN - configuration flexibility is degraded and the performance deterioration occurs in the multi-hop wireless environment. In this paper, we introduce a Linux-based link layer Wireless Mesh Routing System - WBMR. The design and implementation of WBMR provides the dynamic link establishment and the effective multi-channel usage. We have modified the ntroof the original WLAN operation for the dynamic link establishment, and the Linux bridge for the link layer routing. The result of performance evaluation verifies that our WBMR supports fast self-configuration and increases data transmission throughput compared to the other researches of the wireless multi-hop environment.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.402-409
• /
• 2014

Wireless local area network (WLAN) is a widely used wireless access method due to its easy usability and excellent performance. However, its performance degrades significantly as the number of users increases. In busy train stations, where the number of WLAN users are large and, more importantly the number of simultaneous packet transmission attempts is extremely large due to the time synchronization upon train arrival, the packet transmission delay problem is very severe and almost impossible for WLAN stations to initiate communication with WLAN networks. In this paper, a novel distributed WLAN access scheme for efficient WLAN communication in busy train stations is proposed. Using the proposed scheme, WLAN access delay can be significantly reduced under highly congested traffic environments. Therefore, a significant performance enhancement for the WLAN performance used in the Communication Based Train Control (CBTC) can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.901-908
• /
• 2012

In an intelligent automated manufacturing environment, an administrator may use M2M (Machine-to-Machine) communication to recognize machine movement and the environment, as well as to respond to any potential dangers. However, commonly used wireless protocols for this purpose such WLAN (Wireless Local Area Network), ZigBee, and Bluetooth use the same ISM (Industrial Science Medical) band, and this may cause frequency interference among different devices. Moreover, an administrator is frequently exposed to dangerous conditions as a result of being surrounded by densely distributed moving machines. To address this issue, we propose in this paper to employ a location-based frequency interference management using fingerprinting scheme in industrial environments and its advanced localization schemes based on k-NN (Nearest Neighbor) algorithms. Simulation results indicate that the proposed schemes reduce distance error, frequency interference, and any potential danger may be responded immediately by continuous tracing of the locations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1508-1517
• /
• 1993

In this paper, we propose the modeling of a wireless communication system using CSMA protocol, present analytical evalution and simulation as a function of arrival rate and mean END-to-END delay in the distributed packet radio network. Asynchronous 1-persistent CSMA protocol is used in wireless communication system with half duplex. We assume that all terminals are to be in the close range of each other, suitably located in the local area. The traffic presented to a common channel is assumed to be poisson distribution. Analytical model is based on a M/D/1 with breakdown. In conclusion for wireless network model proposed in this paper is suitable for packet arrival rate of 2 packet/sec with mean packet delay time less than 2 times the packet transmission time.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.192-206
• /
• 2005

Integration of mobile networks and Internet has started with 2.5 generation of mobile cellular networks. Internet traffic is today dominant traffic type worldwide. The hanger for higher data rates needed for data traffic and new IP based services is essential in the development of future wireless networks. In such situation, even 3G with up to 2 Mbit/s has not provided data rates that are used by Internet users with fixed broadband dial-up or through wired local area networks. The solution to provide higher bit rates in wireless access network has been found in wireless LAN although initially it has been developed to extend wired LAN into wireless domain. In this paper, we propose and describe a solution created for interoperability between mobile cellular network and WLAN. The integration between two networks, cellular and WLAN, is performed on the authentication, authorization, and accounting, i.e., AAA side. For that purpose we developed WLAN access controller and WLAN AAA gateway, which provide gateway-type access control as well as charging and billing functionalities for the WLAN service. In the development process of these elements, we have considered current development stadium of all needed network entities and protocols. The provided solution provides cost-effective and easy-to-deploy PLMN-WLAN Internetworking scenario.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.5
• /
• pp.2081-2101
• /
• 2016

Successive interference cancellation (SIC) is considered to be a promising technique to mitigate multi-user interference and achieve concurrent uplink transmissions, but the optimal power allocation (PA) issue for SIC users is not well addressed. In this article, we focus on the optimization of the PA ratio of users on an SIC channel and analytically obtain the optimal PA ratio with regard to the signal-to-interference-plus-noise ratio (SINR) threshold for successful demodulation and the sustainable demodulation error rate. Then, we design an efficient resource allocation (RA) scheme using the obtained optimal PA ratio. Finally, we compare the proposal with the near-optimum RA obtained by a simulated annealing search and the RA scheme with random PA. Simulation results show that our proposal achieves a performance close to the near-optimum and much higher performance than the random scheme in terms of total utility and Jain's fairness index. To demonstrate the applicability of our proposal, we also simulate the proposal in various network paradigms, including wireless local area network, body area network, and vehicular ad hoc network.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1021-1029
• /
• 2006

In this paper, we designed and implemented a dual wideband dipole type antenna for the reception of S-DMB (Satellite Digital Multimedia Broadcasting) and 2.4/5 GHz WLAN(Wireless Local Area Network) signals. The proposed antenna based on conventional monopole type dual band antenna was implemented as planar wideband dipole type antenna with the volume of $8{\times}33.8{\times}1.68mm^3$. The proposed antenna is printed type on FR4 substrate of 1.6 mm thick and composed of a dipole type antenna for low frequency band and two symmetric structured resonance elements for high frequency band. We confirmed antenna area with dense surface current for each frequency band with simulation. By varying the length of the antenna area with dense surface current, we could vary resonance frequency of each frequency band separately. Impedance bandwidths$(VSWR{\leq}2)$ are 362 MHz(14.23 %) for 2 GHz band and 1188 MHz(22.13, %) for 5 GHz band which show wideband characteristic. Measured maximum gains were 4.33 dBi for 2 GHz band and 5.48 dBi for 5 GHz band which showed improved performance. And the implemented antenna has a good omni-directional radiation pattern characteristic.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.218-226
• /
• 2019

The use of Information and Communication Technologies (ICT) is the key to operate a change from the traditional manual reading of water meters and sensors to an automated system where high frequency data is remotely collected and analyzed in real time, one of the main components of a Smart Water Grid. The recent boom of ICT offers a wide range of both wired and wireless technologies to achieve this objective. We review and present in this article the most widely recognized technologies and protocols along with their respective advantages, drawbacks and applicability range which can be Home Area Network (HAN), Building Area Network (BAN) or Local/Neighborhood Area Network (LAN/NAN). We also present our findings and we give recommendations on the application of ICT in Smart Water Grids and future work needed.