• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.45-51
• /
• 2016

The purpose of this paper is to plan deployment strategy of public key infrastructure for Malawi by considering the information and communication technology status on it. For this, we will review the information communication technology status on developing and least developed countries focused on Malawi and plan deployment strategy of mobile based public key infrastructure. First of all, we extract out security considerations for public key infrastructure, which is efficient for wireless communication, and design a new lightweight public key infrastructure apt to mobile device by considering Malawi's information communication technology status. Especially, the proposed mobile based public key infrastructure uses smartcards for all the processes of certificate. It could guarantee the same security as the wired counter part based on lightweight mobile device.

• Journal of Information Processing Systems
• /
• v.3 no.1
• /
• pp.16-20
• /
• 2007

This paper describes the development of the sensor interface and driver program for a point of care (POC) device. The proposed pac device comprises an ARM9 embedded processor and eight-channel sensor input to measure various bio-signals. It features a user-friendly interface using a full-color TFT-LCD and touch-screen, and a bluetooth wireless communication module. The proposed device is based on the system on a programmable chip (SOPC). We use Altera's Excalibur device, which has an ARM9 and FPGA area on a chip, as a test bed for the development of interface hardware and driver software.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.27-35
• /
• 2015

Depending on the smart device user growth and development of communication technology, the area about working environment was extended without constraints of time and places. It is introducing to work using user's devices and this environment is called 'BYOD(Bring Your On Device)'. But it is vulnerable to security threat that happened in existing wireless environment and its security threat issue which is caused by inside information leak by an inside job and lost or stolen terminal which is caused by careless user is getting heated. So we studied about access control protocol by user rights under the BYOD situation make a session key based on the user information. We make a session key based on the user information and user device information, after that we design an access control protocol. The protocol we suggest can protect from attack under the BYOD situation and wireless communication situation and also safety and security requirement from inside information leak because it controls user rights.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.347-353
• /
• 2012

In this paper, authors will develop the quick and precise remote controller of automatic fire detection equipment (P-type one-class receiver) based on information communication technology (IT). The remote controller detects the fire and disaster in the building automatically and quickly and then activates the facilities to extinguish the fire and disaster, monitoring such situation in a real time through wire-wireless communication network. The proposed remote controller is applied a programmable logic device (PLD) micom. of one-chip type which is small size and lightweight and also has highly sensitive-precise reliabilities. The one-chip type PLD micom. analyzes digital signals from sensors, then activates fire extinguishing facilities for alarm and rapid suppression in a case of fire and disaster. The detected data is also transferred to a remote situation room through wire-wireless network of RS232c and bluetooth communication, and then the situation room sends an emergency alarm signal. The automatic fire detection equipment (AFDE) based on IT will minimize the life and wealth loss while prevents fire and disaster.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.631-634
• /
• 2009

Recent advances in wireless communication, electronics, MEMS device, sensor and battery technology have made it possible to manufacture low-cost, low-power, multi-function tiny sensor nodes. A large number of tiny sensor nodes form sensor network through wireless communication. Sensor networks represent a significant improvement over traditional sensors, research on Zigbee wireless image transmission has been a topic in industrial and scientific fields. In this paper, we design a Zigbee wireless image sensor node and multimedia monitoring server system. It consists of embedded processor, memory, CMOS image sensor, image acquisition and processing unit, Zigbee RF module, power supply unit and remote monitoring server system. In the future, we will further improve our Zigbee wireless image sensor node and monitoring server system. Besides, energy-efficient Zigbee wireless image transmission protocol and interworking with mobile network will be our work focus.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.381-385
• /
• 2007

As development of wireless communication technology has promoted mobility, Location Based Service (LBS) became embossed. The LBS is a service to recognize and utilize a location of a person or a thing through a device that ensures mobility based on wireless communication network. This paper thus researches on Healthcare Method to respond to emergency rapidly by recognizing a patient's location with the LBS. The LBS also provides location information of a user as well as remote management of organism data such as ECG data or pulse, which is transferred to a hospital or an emergency room.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.304-307
• /
• 2015

Virtualization lacks capabilities for enabling the application to scale efficiently because of new applications components which are raised to be configured on demand. In this paper, we propose an architecture that affords mobile app based on nomadic smartphone using not only mobile cloud computing-cloudlet architecture but also a dedicated platform that relies on using virtual private mobile networks to provide reliable connectivity through Long Term Evolution (LTE) wireless communication. The design architecture lies with how the cloudlet host discovers service and sends out the cloudlet IP and port while locating the user mobile device. We demonstrate the effectiveness of the proposed architecture by implementing an android application responsible of real time analysis by using a vehicle to applications smart phones interface approach that considers the smartphones to act as a remote users which passes driver inputs and delivers outputs from external applications.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.83-84
• /
• 2006

크랭크 샤프트 디플렉션 측정은 선박엔진의 조립공정에 있어, 크랭크 샤프트를 조립 시 1회전의 상태에서 크랭크 스루 간의 디플렉션 상대값의 변화를 확인하는 것이다. 이를 통하여 크랭크 샤프트가 정상 조립되었는지 확인할 수 있다. 기 개발 완료한 구형 무선 크랭크 샤프트 디플렉션 측정장치(상품명 : Measutal)는 측정장치의 길이로 인해 선박용 엔진 중 저속 엔진에만 적용 가능하였다. 하지만 중속엔진의 경우 공간이 협소하여 크랭크 샤프트 디플렉션 측정이 어려우며, 이는 폭정 오차를 수반하게 된다. 본 논문은 상기 문제를 해결하기 위해 중속에도 적용 가능한 신 모델의 개발에 관한 것이다. 또한 개발된 신 모델은 소비자의 요구를 만족하기 위해 구 모델에 비하여 밧데리 지속시간 향상되었고 무선 통신 거리가 확대되었다.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.227-240
• /
• 2020

This paper proposes a novel CTC technology, CB-sense. The CB-sense guarantees a dedicated period for the CTC that results in low duty cycle of the receiver device. In addition, it send a lot of information explosively during the dedicated CTC period. Thus, it can achieve high throughput. The CB-sense uses Clear to Send (CTS) packets to transmit information bits to the heterogeneous wireless technologies. The CTS packets block the neighboring node transmissions, so it reduces co-channel interference. In experiment results, CB-sense represents 20 times more throughput than FreeBee and below 5% symbol error rate in the interference environment.