• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.636-641
• /
• 2018

In recent years, the Internet of things has grown rapidly and is being used in many fields. The function of an Internet device isto collect information in various environments and to provide useful information to users. Due to recent developments in technology, the kinds of Internet devices are increasing and the prices are getting cheaper. In addition, many open source platforms that are easy to use have been developed and are providing convenience to users. In this paper, wireless data transmission and cloud server system based on ESP-12E NodeMCU module was designed and sensor information collected from Internet devices was transmitted to cloud server through WiFi wireless communication. The collected sensor data was saved by creating channel and field in the cloud server and the data of each field was visualized as a graph.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.27-32
• /
• 2017

The several wearable devices are not able to communicate through cable due to its portability. The wireless communication method is used because of its good communication quality and group action features when the several wearable devices communicate with each other. In this paper, we proposed the group decision algorithm for grouping display of the several wearable devices. It means that recognize as a group member after measuring distance in the wireless communication environment. The result of experience showed that the group-type display of several wearable devices method overcome the limit of the display of single wearable device.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.423-426
• /
• 2006

The present situation where the hearing handicapped can never get any information from IT related devices in his place of work and house, the development of the wireless device for communicating with the hearing handicapped can be regarded as the very important research which can solve the problem of the new obstacle in unbalanced information. In this paper, we propose the multipurpose wireless communication device using information and communication technology, for coping with quickly a state of emergency and assisting the normal life of the hearing handicapped.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.166-168
• /
• 2007

A dimmable ballast system for the electrodeless fluorescent lamp is proposed. The proposed scheme is composed of the electronic ballast and the wireless communication part. They both are realized with one EPLD (Erasable Programmable Logic Device). The dimming levels of each lamps can be controlled by a management system through wireless communication technology. 10 ballasts are used for the group lighting system and the experiment results show the system works well.

• Journal of the Korea Computer Industry Society
• /
• v.10 no.5
• /
• pp.193-200
• /
• 2009

In this paper, the raid and fire preventable system using Zibee module with IEEE 802.15.4 wireless communication standard and multi-sensor was developed displaying raid and firing condition with wireless network. The raid preventable system is designed using a ultrasonhe waves sensor and infrared sensor. The fire preventable system is designed using a thermistor. The datas for raid and firing condition are communicated from enddevice to coordinator with wireless network and are displayed on PC monitor.

• Electronics and Telecommunications Trends
• /
• v.34 no.6
• /
• pp.28-41
• /
• 2019

Future mobile services will require data transmission rates of 100 Gbps or higher due to the universalization of virtual and augmented reality devices. Therefore, THz technology, which uses an ultrahigh frequency band of 200 GHz or higher, is expected to be a candidate for such high-quality services. This article describes the current status of THz radio propagation characteristics, device and system developments, and network requirements to identify the overall trends in THz wireless communication technology.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1454-1460
• /
• 2006

This paper assesses communication performance using a roaming simulator when roaming occurs between onboard and ground wireless communication devices for communication based train control system (CBTC). Generally, CBTC is defined as the system regularly collecting location and speed data from each train, transmitting distance information to a train, and optimizing train speed according to train performance. When a train is moving, roaming is also performed to continuously transmit and receive train control information between the ground controller and the train. To operate CBTC, packet loss rate should be less than 1%, roaming time less than 100ms during roaming. We developed a roaming simulator to check communication performance before installing ground and onboard equipments on actual wireless sections. The roaming simulator to be introduced in this paper is for roaming simulation before conducting CBTC field test, which is the project to develop Urban Rail Signaling System Standards, being conducted in KRRI. The simulation consists of one onboard wireless communication device and three ground wireless communication devices, and the roaming simulator estimate packet loss rate occurring during roaming process of the two devices. Therefore, if you use the roaming simulator before the field test, you can predict various problems to occur in actual environment and reduce time, cost and people necessary to resolve these problems.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.713-718
• /
• 2012

Lumber spine range of motion has been used to measure of physical and functional impairment by various tools from a ruler to 3D kinematic devices. However, pre-existing tools have problems in either movement or accuracy and reliability limitations. Accurate devices are limited by fixed space whereas simple devices are limited in measuring complex movements with less accuracy. In order to solve the location, movement and accuracy limitations at once, we have developed a novice measurement device equipped with accelerometer sensor and gyroscope sensor for getting three-dimensional information of motion. Furthermore, Kalman filter was applied to the algorithm to improve accuracy. In addition, RF wireless communication was added for the user to conveniently check measured data in real time. Finally, the measurement method was improved by considering the movement by a reference point. An experiment was conducted to test the accuracy and reliability of the device by conducting a test-retest reliability test. Further modification will be conducted to used the device in various joints range of motion in clinical settings in the future.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.261-268
• /
• 2014

This paper presents a electrocardiogram(ECG), electromyogram(EMG), and Photoplethysmography(PPG) signal wireless monitoring system based on Bluetooth Low Energy (BLE). ECG and EMG sensor interface analog front-end circuits are designed by using off-the-shelf parts. Texas Instruments(TI)'s CC2540DK is used for BLE-based communication. Two CC2540DK modules are used as Peripheral and Central nodes. In peripheral device, vital signals are acquired by the analog front-ends and fed to ADC for analog-to-digital conversion. The peripheral transmitts the data through the air to the central device. The central device receive the data and sends them to PC using UART. GUI is designed using Labview for displaying the acquired vital signals. The developed system can be used for future ubiquitous wireless healthcare system based on bluetooth 4.0.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.12
• /
• pp.455-462
• /
• 2014

In recent years, various services in mobile environments due to the growth of mobile devices and related techniques like wireless networks. Furthermore, as the increasing communication traffic in cellular networks has become a new significant issue, many studies for device-to-device(D2D) communication and D2D-based cooperative services have been performed recently. In this paper, we design a smart agent system for D2D-based cooperative services and propose a dynamic service binding method based on service ontology. We classify roles of mobile devices for cooperative services by defining three types of smart agents, and construct a knowledge base in order to describe properties of 'service' unit. The proposed knowledge model, D2D cooperative service ontology, can enable a autonomous cooperative services between mobile devices by binding a requested service to the appropriate member device according to the real-time context in mobile environments.