• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.131-136
• /
• 2005

UWB is the most spotlighted wireless technology that transmits data at very high rates using low power over a wide spectrum of frequency band. UWB technology makes it possible to transmit data at rate over 100Mbps within 10 meters. To preserve important header information, MB-OFDM UWB adopts Reed-Solomon(23,17) code. In receiver, RS decoder needs high speed and low latency using efficient hardware. In this paper, we suggest the architecture of RS decoder for MB-OFDM UWB. We adopts Modified-Euclidean algorithm for key equation solver block which is most complex in area. We suggest pipelined processing cell for this block and show the detailed architecture of syndrome, Chien search and Forney algorithm block. At last, we show the hardware implementation results of RS decoder for ASIC implementation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.35 no.2
• /
• pp.53-69
• /
• 2010

This paper proposes an ant-based routing algorithm, Ant System-Routing in wireless Senor Networks(AS-RSN), for wireless sensor networks. Using a transition rule in Ant System, sensors can spread data traffic over the whole network to achieve energy balance, and consequently, maximize the lifetime of sensor networks. The transition rule advances one of the original Ant System by re-defining link cost which is a metric devised to consider energy-sufficiency as well as energy-efficiency. This metric gives rise to the design of the AS-RSN algorithm devised to balance the data traffic of sensor networks in a decentralized manner and consequently prolong the lifetime of the networks. Therefore, AS-RSN is scalable in the number of sensors and also robust to the variations in the dynamics of event generation. We demonstrate the effectiveness of the proposed algorithm by comparing three existing routing algorithms: Direct Communication Approach, Minimum Transmission Energy, and Self-Organized Routing and find that energy balance should be considered to extend lifetime of sensor network and increase robustness of sensor network for diverse event generation patterns.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.195-198
• /
• 2005

UWB is the most spotlighted wireless technology that transmits data at very high rates using low power over a wide spectrum of frequency band. UWB technology makes it possible to transmit data at rate over 100Mbps within 10 meters. To preserve important header information, MBOFDM UWB adopts Reed-Solomon(23,17) code. In receiver, RS decoder needs high speed and low latency using efficient hardware. In this paper, we suggest the architecture of RS decoder for MBOFDM UWB. We adopts Modified-Euclidean algorithm for key equation solver block which is most complex in area. We suggest pipelined processing cell for this block and show the detailed architecture of syndrome, Chien search and Forney algorithm block. At last, we show the hardware implementation results of RS decoder for ASIC implementation.

• The Journal of Information Technology
• /
• v.12 no.3
• /
• pp.1-6
• /
• 2009

This paper has focused on the development of an educational sensor network (ESN) based on wireless sensor networks(WSN) and pervasive monitoring systems for students' activity during scientific experiments. A number of WSN systems have been proposed with integrated wireless transmission, mounted sensor boards and local processing. However, there is no trail to employ WSN on the educational field. In this paper, to facilitate research and development using wireless sensor network and multi-sensor data fusion, the educational sensor network (ESN) hardware development platform is presented. The ESN project is conducted over one semester time period (Spring Semesters). It involves approximately twenty middle school students who enrolled a gifted program in Kongju National University. Though under prepared, these students are in general highly motivated to learning specially when presented with the ESN project. An ESN project such as this is expected to provide an excellent means for teaching and learning scientific and mathematical principles.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2453-2467
• /
• 2017

Wireless communication is a telecommunication technology, which enables wireless transmission between the portable devices to provide wireless access in all types of environments. In this research, the measurements and various empirical models are analysed and compared in order to find out a suitable propagation model to provide guidelines for cell planning of wireless communication systems. The measured data was taken in urban region with low vegetation and some trees at 900 MHz frequency band. Path loss models are useful planning tools, which permit the designers of cellular communication to obtain optimal levels for the base station deployment and meeting the expected service level requirements. Outcomes show that these empirical models tend to overestimate the propagation loss. As one of the key outputs, it was observed that the calculations of Weissberger model fit with the measured data in urban environment.

• Smart Media Journal
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2014

It is practical nowadays to automate data recording in order to prevent loss and tampering of records. There are existing technologies that satisfy this needs and one of them is wireless sensor networks (WSN). Wireless body sensor networks (WBSN) are wireless networks and information-processing systems which are deployed to monitor medical condition of patients. In terms of performance, WBSNs are restricted by energy, and communication between nodes. In this paper, we focused in improving the performance of communication to achieve less energy consumption and to save power. The main idea of this paper is to prioritize nodes that exhibit a sudden change of vital signs that could put the patient at risk. Cluster head is the main focus of this study in order to be effective; its main role is to check the sent data of the patient that exceeds threshold then transfer to the sink node. The proposed scheme implemented added a time-based protocol to sleep/wakeup mechanism for the sensor nodes. We seek to achieve a low energy consumption and significant throughput in this study.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.83-88
• /
• 2005

A transportation problem in Korea is a serious issue that has to be solved urgently in the motor era of 15 million vehicles. Recently ITS has been introduced to improve efficiency of the current roads because an excessive budget and a long term construction are needed to build new roads. Therefore the government enacted the law as of ITS and the in architecture. However, these ITS information services were oriented to mainly vehicles and drivers, not public entities such as bus driver, passengers and so on. Nowadays lots of local autonomous city introduced a public transportation information system (PTIS), and providing useful information for the public. For this PTIS, important design issues are to be focused on detecting and tracking technology of moving bus, and a wireless communication link to transmit the location information. This paper presents design models using several wireless communication methods, and an implementation case using a Wireless packet Data communication Network (WDN) to transmit bus location information at Seoul, Korea.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.821-822
• /
• 2006

Ubiquitous healthcare monitoring and measuring system based on wireless sensor network was implemented and tested. The system can measure the ECG and body temperature of patients or elderly persons and transfer the data wirelessly in ad-hoc network to remote base-station connected to doctor's PDA/PC or hospital server, using wireless sensor motes. The data obtained can be analyzed by doctors and care providers to monitor a health status of patient in real time environment. To prove the capabilities of the wireless sensor network platform for ubiquitous healthcare applications, the performance of our monitoring and measuring system was tested with positive results.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.231-234
• /
• 2003

In this paper, we propose the enhanced CSMA/CA MAC protocol fir mobile multi-hop wireless Ad-hoc networks. In the conventional wireless Ad-hoc network such as WLAN using CSMA/CA MAC protocol, communications between terminals that fn connected within multi-hop node may degrade the transmission efficiencies as increasing the multi-hop nodes because of RTS-CTS-DATA-ACK message exchange between terminals. In this raper, we apply the ACK/RTS control message into multi-hop transmission between terminals for wireless ad-hoc networks and improve the data traffic transmission efficiencies compared with conventional CSMA/CA MAC protocol used in WLAN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1082-1086
• /
• 2008

Multiple-input multiple-output (MIMO) is an efficient technology to increase data rate in wireless networks due to bandwidth and power limitations. Data transmission rate between transmitter and receiver is determined by channel capacity. MIMO has an advantage of reliable communication over wireless channel because of utilizing the channel capacity properly. In this letter, we drive a new formula, closed form capacity formula, using confluent hypergeometric function.