• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2691-2707
• /
• 2014

Medium access control is critical in wireless networks for efficient spectrum utilization. In this paper, we introduce a novel collision resolution method based on the technique of known interference cancellation, and propose a new MAC protocol named as CR-MAC, in which AP tries to decode all the collided data packets by combining partial retransmissions and known interference cancellation. As the collided transmissions are fully utilized, less retransmission is required, especially in a crowded network. The NS-2simulation and MATLAB numerical results show that, under various network settings, CR-MAC performs much better than the IEEE 802.11 DCF in terms of the aggregation throughput and the expected packet delay.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.288-291
• /
• 2002

We characterize multipath fading channel dynamics at the packet level and analyze the corresponding data queueing performance in various environments. We identify the similarity between wire-line queueing analysis and wireless network per-formance analysis. The second order channel statistics, i.e. channel power spectrum, is fecund to play an important role in the modeling of multipath fading channels. However, it is identified that the first order statistics, i.e. channel CDF also has significant impact on queueing performance. We use a special Markov chain, so-called CMPP, throughout this paper.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.476-479
• /
• 2008

Wireless Sensor Network typically incorporates various real time applications that must meet timing constraints under severe resource limitations. Due to the high data rate and burst traffic for that type of applications, occurrence of congestion is very common. Ensuring the end-to-end deadline under congested scenario is quite challenging. In this paper we propose a hop-by-hop rate control algorithm which avoids the congestion as well as ensures that the real time traffic will meet the end-to-end deadline by guaranteeing the meeting of local deadline at intermediate hop. Finally, simulation has demonstrated the effectiveness of our approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.401-406
• /
• 1998

If a mobile robot can be controlled remotely via the internet using wireless IP protocol network, it becomes much useful and convenient. However risk of illegal access is also increased. This paper discusses problems of the illegal access and proposes protection methods against the access.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.8
• /
• pp.742-747
• /
• 2004

Outdoors we can easily acquire our accurate location by GPS. However, the GPS signal can't be acquired indoors because of its weak signal power level. Adequate positioning method is demanded for many indoor positioning applications. At present, wireless local area network (WLAN) is widely installed in various areas such as airport, campus, and park. This paper proposes a positioning algorithm using WLAN signal strength to provide the position of the WLAN user indoors. There are two methods for WLAN based positioning, the signal propagation method uses signal strength model over space and the empirical method uses RF power propagation database. The proposed method uses the probability distribution of the power propagation and the maximum likelihood estimation (MLE) algorithm based on power strength DB. Test results show that the proposed method can provide reasonably accurate position information.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2011

Current IEEE 802.11 standard is very vulnerable that between the AP and STA authentication and security mechanisms is widely known. Therefore, IEEE has proposed security architecture RSN (Robust Security Network) for 802.11. RSN is used the access control, authentication, and key management based on the IEEE 802.1X standard. In this paper, IEEE 802.1X or 802.11 a combination of several models proposed for the vulnerability, and session hijacking or MiM (Man-in the-Middle) attacks to respond, the authentication mechanism Was designed to the access control between the STA and the AP.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.463-471
• /
• 2011

Cooperative communications using relays in wireless networks have similar effects of multiple-input and multiple-output without the need of multiple antennas at each node. To implement cooperation into a system, efficient protocols are desired. In IEEE 802.11 families such as a/b/g, mobile stations can automatically adjust transmission rates according to channel conditions. However throughput performance degradation is observed by low-rate stations in multi-rate circumstances resulting in so-called performance anomaly. In this paper, we propose active relay-based cooperative medium access control (AR-CMAC) protocol, in which active relays desiring to transmit their own data for cooperation participate in relaying, and it is designed to increase throughput as a solution to performance anomaly. We have analyzed the performance of the simplified AR-CMAC using an embedded Markov chain model to demonstrate the gain of AR-CMAC and to verify it with our simulations. Simulations in an infrastructure network with an IEEE 802.11b/g access point show noticeable improvement than the legacy schemes.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.335-336
• /
• 2015

Seamless mobility is one of the most crucial feature of telecommunication industry. Researches are going on in full swing to deal with this feature in most efficient manner. Software Defined Networking (SDN) is seen as the next generation paradigm which can facilitate seamless mobility across heterogeneous networks by segregating the control plane and data plane functionalities, and logically centralizing the control plane. In this paper, we propose a simplified Layer 2 handover mechanism for enterprise wireless networks, based on SDN framework. We present a network assisted L2 handover method using the IEEE 802.21 Media Independent Handover (MIH) protocol and SDN concepts, to achieve seamless mobility across heterogeneous networks.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.174-184
• /
• 2018

The efficiency and safety of social-overhead capital (SOC) public infrastructures have become an eminent social concern. In this regard, a continuous structural health monitoring has been widely implemented to oversee the robustness of such public infrastructures for the safety of the public. This paper deals with the analysis of a distributed mobility management (DMM) support for wireless sensor network (WSN) based information transmission system. The partial DMM support separates the data and control plane infrastructures, wherein, the control plane is managed by a particular mobility management network entity, while the data plane is distributed by the mobility anchors. The system will be able to optimize the information transmission for a wireless structural health monitoring of SOC public infrastructures specifically designed for bridges, and thus, guarantees the safety of public commuters.

• International Journal of Computer Science & Network Security
• /
• v.22 no.6
• /
• pp.63-66
• /
• 2022

The article discusses the application of the IoT concept in the sensitive field of medical devices on the example of a developed prototype of a mechanotherapeutic simulator. Mechanotherapy is a complex of therapeutic, preventive, and restorative exercises conducted using simulators, specially designed for developing movements in individual joints. Mechanotherapy is used for the early and painless restoration of joint mobility, to prevent complications associated with prolonged immobilization of the injured area of extremities. Using the mechanotherapy simulator allows developing the joint painlessly, which accelerates the metabolism in the injured area, and soft tissues are restored to normal. The article provides information about the electronic components that ensure the wireless operation of the device and describes in detail the applied software as well as the client application for a mobile device.